Snom M Series User manual

How to configure the Voice prompt on the A190 headset
DECT M-SERIES: HEADSET
In this Howto we would like to show you how to use the " " function of our DECT M-Series headset " ".Voice Prompt A190
Here is a picture of the headset with a description of all buttons and functions.
Menu structure.
Navigation within the voice menu:
HARDWARE KEY SHORT PRESS LONG PRSS LONG PRESS
AUX FUNCTION Enter Menu mode / Select item Exit Menu mode 2 seconds
VOLUME+ Next item
VOLUME– Previous item
To learn more about the basics of the A190 headset, please look here: .A190 - Basics
Silent mode: Silences the ringer when enabled. Does not affect the stored value of ringer volume.
On
Off
Language: Two languages are available on the headset. English and another language, selectable for the user.
English
Native
Registration: Access code (default “0000”).
Register
Deregister
Audio feedback: Choose between beeps or voice prompts (where available) as user feedback. Where no voice prompts are available,
beeps will be played, and this setting is ignored. The menu will always use voice prompts.
Voice prompts
Beeps
Tone Protection: Automatic protection against loud noises and protection from too high-volume settings with prolonged use of the
headset.Off
Office
Quiet
Noise reduction: Enable or disable digital noise reduction.
On
Off
Equalizer: Choose between three different equalizer settings.
Normal
Bass
Treble
Auto mode: Automatic hook on when headset is removed from charger on incoming call.
On
Off
Silent charging: The headset makes no call indication (neither ringer nor LEDs) while cradled.
On: LED indication only while cradled.
Headset Deactivated: Appear disconnected, cannot receive calls while cradled.
Off: Normal mode w LED and audio while cradled.

To be able to configure the A190 using the voice menu, please follow the instructions below.
First press the " " button to enter the top level of the voice menu. The first menu item will be read to you is: " ".AUX Silent mode
Attention, you are not yet in the submenu "Silent mode".
You can either enter the submenu " " by pressing " " again, or you can navigate to another menu item by pressing " " orSilent mode AUX VOLUME+
" " buttons.VOLUME-
You can expand the at the top. The menu is structured from top to bottom, i.e. you navigate from the first menu item "menu structure Silent
" down to the other menu items.mode
So if you want to change the menu item " " below " ", you have to press " " first to enter the menu, then " " (tolanguage Silent mode AUX VOLUME+
move down one item) and then " " again to enter the submenu. With each step you take, you will hear a message telling you where you areAUX
and what your current status is.
To save the changed function, press " " again. You will hear the announcement of the selected item/status again.AUX
To leave the voice menu you can either press the " " button for or wait until the headset leaves the menu by itself. Either way, aAUX 2 seconds
beep will be heard to indicate that you have left the menu.
Example: Switch off Voice Prompt:
To deactivate the voice prompt function, you must complete the following sequence.
(The respective audio output is marked with an arrow .)
Press AUX
-> "Silent mode" voice prompt
press Volume +
-> "Language" voice prompt
press Volume +
-> "Registration" voice prompt
press Volume +
-> "Audio Feedback Voice" voice prompt
press AUX
-> "Audio Feedback Voice" voice
press Volume +
-> "Audio feedback beep" voice prompt
press AUX
-> "Audio feedback beep" voice prompt
Press & hold AUX for 2 seconds (beep will confirm that menu was quit) or wait until beep confirms settings saved and headsets quit menu
Related articles
Further Information
VoIP Essentials
Visit the Snom Forum
Open a support ticket
Find a local partner

Adding M5 repeaters in a multicell environment
After upgrading my DECT base to 400B02 my M65 cannot register anymore
After upgrading the base to version 400B02 the provisioning via HTTPS/TLS isn't working anymore
Assign a handset to a SIP account on a M300
Attended or blind call transfer of the 2nd call results in merging the 1st and 2nd incoming call
Auto Provisioning DECT devices
Can I daisy-chain M5 DECT repeaters
Can I install a mixed system with M700 and M900 together
Can I register a 3rd party DECT handset or repeater to a Snom M300,M700,M900 base station
Configuring multiple SIP Extensions with an M-series DECT handset
DECT - 1. Multicell Deployment Guide
DECT - 2. Physical installation
DECT - 3.0 Multicell setup
DECT - 3.1 Add Extensions
DECT - 4. Site Survey
DECT - 5. Measuring with DECT Discovery Mode
DECT - 6. Best Practises
DECT - Beacons How-To
DECT M-Series How-to
DECT M-Series Provisioning