Snom phones Instruction Manual
F
REQUENTLY
A
SKED
Q
UESTION
Con guring snom phones
for Mass Deployment
Date: Mar-26-2004
Author: Sven Fischer
Document: faq-04-03-26-sf
2
snom technology AG
[ F REQUENTLY A S K E D Q U E S T I O N ]
As stated in the FAQ „How can I update a
snom phone?”, it is possible to con gure your
snom phone with con g les, which consist of
the following settings.
Phone settings
Settings are non-volatile name/value
pairs that are stored in the ash of the
phone. They include registration information,
dialled numbers, network settings and
other information that should be available
after rebooting. Settings can be made read
only on a per setting basis. This is useful in
environments where an operator sets up the
phones and wants to avoid users changing
settings that affect the stability of the phone.
In this way, expensive trouble ticket searching
can be reduced and the total cost of ownership
of the phone be minimized.
Settings Files
Setting les are ASCII-based les
containing lines (terminated with newline or
carriage return/newline pairs). Comments
start with a # or a < character. The < and >
characters allow easy integration of html tags.
Names may consist of the characters a-z, A-Z,
0-9 and _.
Appending a name with an “!” character
means that this setting becomes writable by
the user. Appending the name with an “&”
states that the setting is read only (this is the
default). If a setting is marked writable, the
value in the settings le is only written to the
phone if that setting has not yet been set up at
the phone. In order to overwrite such settings,
do not append the setting name with “!”.
A sample le looks like this:
<html>
<pre>
#This is a settings le
#
phone_name: testphone
dns_domain: intern.snom.de
dns_server1!: 192.168.0.9
</pre>
<html>
Downloading procedure
Settings are downloaded from web
servers. HTTP is a very powerful way to get
con guration information from anywhere in
the world. The location of a le is described as
a URL, i.e. it begins with http://.
This is how the Settings are set up:
1.
The settings that were stored in the
ash memory are read.
2.
Network and DNS is set up. This allows
the phone to get settings from internet
URLs.
3.
It then checks the setting "setting_
server” and loads the settings stored in
the URL (e.g. http://www.snomag.de/
snom200/snom200.htm) provided. For
a small description of the le format,
see below. The setting_server URL
can also consist of a {mac} statement
like http://www.snomag.de/snom200/
snom200.php?mac={mac}. The MAC
address is a unique identi cation ID of
Ethernet devices. snom devices have
the form 000413xxxxxx, where xxxxxx
is a hexadecimal number identifying
the snom device. The MAC address is
automatically replaced from the phone
with its own mac address before using
the URL. So phone speci c settings can
be provided for each phone via this
mechanism. The “setting_server” setting
can be set manually via webinterface or
automatically via DHCP (options 66 and
67) and through snom4S SIP proxy.
4.
The de facto settings are added. These
settings may differ from what has been
set up because DHCP may have changed
them. The settings include:
•
the IP address of the device,
•
the net mask,
•
the IP gateway,
•
the hostname,
•
the DNS domain, rst and second
DNS server,
•
the UTC offset in seconds,
•
the time server,
snom phones con guration
3
[ F REQUENTLY A S K E D Q U E S T I O N ]
•
DHCP on or off
Each setting is described by its ‚Name:
‘ which should be added to the con g le
followed by a colon and its speci c value.
Name is followed by ‚Valid values:‘ where
the valid values are described. Each possible
value is bracketed in <>.The braces must be
left out if you are using the values stored in
a con g le. ‚Default:‘ shows the value which
is set by default after you have removed all
of the setting with a manual update or a
reset values! Lastly, ‚Description’ gives brief
details of each setting. See also the snom4S
SIP proxy manual for PNP con guration via
the proxy. And see the FAQ “How to update a
snom phone” for further details regarding the
update process.
Redirection
redirect_event
Valid values: <all>, <busy>, <none>,
<time>
Default: none
Description: Event that causes redirection.
<all> redirects always, <none> never,
<busy> when the phone is in use and
<time> after a timeout.
redirect_time
Valid values: e.g. <15>
Default: blank
Description: Number of seconds after
which the phone will redirect the incoming
call.
redirect_number
Valid values: e.g. <tb,sf> or <sip:tb@sn
om.de;q=0.8,[email protected];q=0.9>.
Default: blank
Description: The redirection target. If the
proxy executes the redirection, this may
be a comma-separated list of alternate
destinations (including probabilities).
redirect_busy_number
Valid values: e.g. <tb,sf> or <sip:tb@sn
om.de;q=0.8,[email protected];q=0.9>.
Default: blank
Description: The redirection target when
the redirect_event is set to busy.
Basic
language
Valid values: <English>, <English(UK)>,
<Deutsch>, <Francais>, <Espanol>,
<Cestina>, <Nederlands>, <Polski>,
<Portugues>, <Slovencina>, <Suomi>,
<Svenska>, <Japanese>, <Chinese>
Default: English
Description: Selects the language.
display_method
Valid values: <full_contact>, <display_
name>, <user_name>
Default: full_contact
Description: Selects the display style of
SIP URLs.
call_completion
Valid values: <true>, <false>
Default: false
Description: With <true> the phone
offers after a “busy” the option to wait
for the other party to become free again
and inform the user to make a new call
attempt.
auto_dial
Valid values: <off>, <2> , <5>, <10>,
<15>
Default: off
Description: Phone begins after 2, 5, 10
or 15 seconds to dial the number already
typed in.
block_url_dialing
Valid values: <true>, <false>
Default: false
4
snom technology AG
[ F REQUENTLY A S K E D Q U E S T I O N ]
Description: With <true> the user is not
anymore able to change the inputtype
for editing chars, it will remain numbers
only.
challenge_response
Valid values: <true>, <false>
Default: true
Description: <true> turns on displaying
challenge request on the display to the
user.
broadsoft_call_control
Valid values: <true>, <false>
Default: false
Description: <true> turns on broadsoft
call control feature support.
call_waiting
Valid values: <true>, <false>
Default: false
Description: If call waiting indication
(CWI) is on (<true>), during a call
parallel incoming calls are signaled with
a knocking sound and the caller hears a
free signal. In case of <false> only one
incoming call in parallel can be handled
and the caller hears a busy signal.
cw_dialtone
Valid values: <true>, <false>
Default: false
Description: In case of holding a party
you will hear a free tone <true> or
nothing <false>
conf_hangup
Valid values: <true>, <false>
Default: false
Description: Someone maybe wants the
hookswitch to not cancel a call, then it
should be set to <false>.
transfer_on_hangup
Valid values: <true>, <false>
Default: true
Description: to switch off “transfer on
hook” functionality, set it to <false>.
contrast
Valid values: Between <0> and <15>
Default: 8
Description: Determines the display
contrast, but should not be used,
because each phone reacts differently
to it dependend by example from the
temperature etc. Its better to set it
manually.
image_src
Valid values: <true>, <false>
Default: false
Description: The pictures for the internal
web interface are taken from the phone
(<false>) or loaded via the Internet
(<true>). Thus if you have a slow
connection to the remote phone, <true>
will signi cantly speed up the displaying
of the phone‘s webpages.
guess_number
Valid values: <true>, <false>
Default: true
Description: Number guessing or auto
completion while typing in numbers to
dial.
deny_all_feature
Valid values: <true>, <false>
Default: true
Description: If set to <true>, the “Deny
All” option is offered on incoming calls.
Otherwise it is disabled.
admin_mode
Valid values: <true>, <false>
Default: true
Description: Administrator mode (all
settings are accessible) or user mode (only
a few basic settings are accessible).
snom phones con guration
5
[ F REQUENTLY A S K E D Q U E S T I O N ]
admin_mode_password
Valid values: Numbers and character
strings of unspeci ed length, e.g.
<1234>, <0fg5gju>, <nhcndeve>
Default: 0000
Description: The password for entering
the Administrator mode on the snom
phone.
SIP Line Settings
The SIP stack on the phone supports
seven lines, which are identi ed with the
numbers 1 through 7. Line-speci c settings
are appended with the line number.
user_realname[1-7]
Valid values: e.g. <Jim Testa>
Default: blank
Description: This is the real name of the
user that is displayed for line x.
user_name[1-7]
Valid values: e.g. for <sip:
abc@company.de>, the user_name[1-7]
would be abc.
Default: blank
Description: The account name for line
x. This is a mandatory setting to set up a
SIP line!
user_host[1-7]
Valid values: e.g. for <sip:
abc@company.de> the user_host would
be <company.de>.
Default: blank
Description: The registrar for line x. This
is also a mandatory setting to set up an
SIP line!
user_q[1-7]
Valid values: Values between <0.0> and
<1.0>
Default: 1.0
Description: The probability of the
registration for line x. This probability
is used by some proxies to call the
registered phones one by one (sequential
and parallel forking proxy).
user_action[1-7]
Valid values: <none>, <proxy>,
<redirect>
Default: none
Description: The action that should be
performed by the registrar for line x.
If speci ed <redirect>, it will act as a
redirect server. <proxy> will make it
work as a proxy only.
user_expiry[1-7]
Valid values: <60>, <600>, <3600>,
<7200>, <28800>, <86400>
Default: 86400 (one day)
Description: The proposed expiry time of
the registration in seconds for line x.
user_mailbox[1-7]
Valid values: e.g. <abc> or <sip:
Default: Blank
Description: The SIP url of the mailbox
associated with line x.
user_ringer[1-7]
Valid values: <Ringer1>, <Ringer2>,
<Ringer3>, <Ringer4>, <Ringer5>,
<Ringer6>, <Ringer7>
Default: Ringer1
Description: The ring tone to be used
if a call comes to that speci c line. See
“ring_source” also.
active_line
Valid values: [1-7]
Default: 1
Description: Number of the active SIP
line. This is the line that is used as the
originator of an outgoing call.
6
snom technology AG
[ F REQUENTLY A S K E D Q U E S T I O N ]
SIP Stack Settings
sip_post x
Valid values: e.g. <proxy.company.de>
Default: blank
Description: Register post x, which is
automatically chosen as registrar if the
logon wizard is used to logon an SIP user
and the registrar has not been set up
through the logon wizard.
sip_proxy
Valid values: e.g. <proxy.company.de>,
<192.168.0.24>
Default: blank
Description: Address or path of the
outbound proxy that is used for calling.
route_proxy
Valid values: <true>, <false>
Default: false
Description: Treat as initial route
(<true>), <false> for address only
nat_detection
Valid values: <auto>, <upnp>,
<stunclient>, <static>, <off>
Default: auto
Description: NAT detection according to
your network.
stun_server
Valid values: e.g. <217.115.141.99:
5062>
Default: blank
Description: IP address of a STUN server
(hostname:port) if you have one.
stun_binding_interval
Valid values: Integer values e.g. 5, 10.
Default: blank
Description: STUN binding interval in
seconds.
rtp_port_start
Valid values: Valid port numbers.
Default: blank
Description: First dynamic RTP port
rtp_port_end
Valid values: Valid port numbers.
Default: blank
Description: Last dynamic RTP port
network_id_name
Valid values: Valid name.
Default: blank
Description: Network identity
(hostname)
network_id_port
Valid values: Valid port number.
Default: blank
Description: Network identity (port)
use_nw_port
Valid values: <true>, <false>
Default: false
Description: Use local SIP port (<false>)
or network port (<true>)
sip_retry_t1, sip_retry_t2
Valid values: Integer values, e.g.
<500>.
Default: 500, 4000
Description: The time for resending SIP
messages in milliseconds. They should be
set to 500 and 4000 respectively.
session_timer
Valid values: Integer values, e.g.
<2400>, <3200>.
Default: 3600
Description: Default time for session
snom phones con guration
7
[ F REQUENTLY A S K E D Q U E S T I O N ]
timer in seconds. 0 disables the session
timer, 3600 is a reasonable value.
dirty_host_ttl
Valid values: Integer values, e.g. <60>,
<120>.
Default: 0
Description: Time in seconds until the
phone waits before it repeats a non
answered request again.
max_forwards
Valid values: Integer values, e.g. <40>,
<60>.
Default: 70
Description: The maximum number of
hops allowed for an SIP request/
response.
enum_suf x
Valid values: e.g. <e164.arpa>
Default: e164.arpa
Description: Route domain for ENUM,
see FAQ “ENUM on snom phones”
tcp_threshold
Valid values: <auto>, <tcp>, <udp>
Default: auto
Description: Set transport layer for
SIP messages either to TCP, UDP or
automatic.
trace
Valid values: <true>, <false>
Default: true
Description: Enable tracing output of the
current protocol stack.
logon_wizard
Valid values: <true>, <false>
Default: false
Description: Logon wizard and mobility
features available in snom key menu.
user_phone
Valid values: <true>, <false>
Default: true
Description: Use user=phone in SIP
signalling.
use_mapped
Valid values: <true>, <false>
Default: true
Description: Use mapped address.
publish_presence
Valid values: <true>, <false>
Default: false
Description: Publish presence
information on <true>.
refer_policy
Valid values: <auto>, <refer>, <bye>
Default: Auto
Description: Choose between REFER and
BYE/Also method for initiating a transfer.
Auto makes an automatic selection
depending on the capabilities indicated
by the other party.
refer_brackets
Valid values: <true>, <false>
Default: false
Description: In case you want to have
your REFER framed with brackets set it
to <true>.
user_dp_str[1-7]
Valid values: dialplan regular expression,
see snom4S proxy manual
Default: blank
Description: up to 7 dialplan lines
sip_moh_server
Valid values: e.g. <sip:[email protected]>,
<mh>, <192.168.0.40>
Default: blank
Description: SIP Address of music on
8
snom technology AG
[ F REQUENTLY A S K E D Q U E S T I O N ]
hold server. The music is automatically
played if the phone is on hold.
SIP Authentication
auth_realm[1-9], auth_user[1-9], auth_
pass[1-9], auth_hash[1-9]
Valid values:
e.g. <company, 456876, answerIs42,
a64bd7c29de0f23ba64bd7c29de0f23b0>
Default: blank
Description: A setting for registrar
authentication. The realm depends on
the used product; the username and the
password can usually be set up on the
proxy and registrar, auth_hash is a MD5
encrypted password, which can be used
instead of auth_pass.
auth_valid[1-9]
Valid values: <all>, <1>, <2>, <3>,
<4>, <5>, <6>, <7>
Default: all
Description: De nes to which sip line the
current authentication line is assigned.
H.323 Settings
h323_e164_number
Valid values: e.g. <3884576>
Default: Blank
Description: E164 number assigned to
the phone.
h323_ID
Valid values: e.g. <kitchen>
Default: blank
Description: H.323 ID assigned to the
phone.
h323_URL_ID
Valid values: e.g. tx@company.de
Default: blank
Description: H.323 URL ID assigned to
the phone.
gkgw_mode
Valid values: <auto>, <gatekeeper>,
<gateway>, <none>
Default: auto
Description: Gatekeeper or gateway
mode. Can be <auto> (automatic
discovery of Gatekeeper) or <gatekeeper>
for explicitly using the gatekeeper mode,
<gateway> for gateway mode and
<none> for autonomous operation.
h323_gateway
Valid values: e.g. <192.168.0.9>,
<gtk.company.de>
Default: blank
Description: IP address of the gatekeeper
or the gateway, depending on gkgw_
mode (see above). This eld will be
automatically set to the discovered
gatekeeper‘s IP Address if <auto> mode
is selected in “gkgw_mode”.
h323_ttl
Valid values: e.g. <600>
Default: 600
Description: Time-to-live for Gatekeeper
registration. Very low values result in
more frequent refreshes of registration
but also cause additional network traf c.
Very high values result in large intervals
of disconnection from the Gatekeeper
before getting back online if the
gatekeeper reboots without sending any
un-registration request to the phone.
early_start
Valid values: <true>, <false>
Default: true
Description: The early start option allows
the H.245 channel to be set up earlier,
and hence speeds up the call setup.
When early start is turned on, the H.245
channel address is also supplied in the
Setup message. This speeds up the call
snom phones con guration
9
[ F REQUENTLY A S K E D Q U E S T I O N ]
because the H.245 channel negotiations
can proceed in parallel to H.225.
fast_start
Valid values: <true>, <false>
Default: false
Description: Fast start sends encoded
OpenLogicalChannel messages within the
Setup messages and hence eliminates
the need for a separate H.245 channel
for Codec capability negotiation. This
will only work if the other party is also
supporting fast start. This feature in H.323
is optional, meaning it can be ignored by
an endpoint not supporting this feature,
hence making the snom phone revert to
the normal H.245 signalling on a separate
channel. Note that if Fast Start is being
used, Out of band DTMF might not work
because the DTMF info is relayed on the
H.245 channel.
h323_h245_tunneling
Valid values: <true>, <false>
Default: false
Description: H.245 Tunnelling option
sends tunnelled H.245 messages within
an H.225 pdu. This also accelerates
connection setup if both parties are
supporting this feature.
trace
Valid values: <true>, <false>
Default: true
Description: Enable tracing output of the
current protocol stack.
h323_h450
Valid values: <true>, <false>
Default: false
Description: If ag is set to <true>,
H.450 supplementary services are used,
otherwise (<false>) it is facility-based.
Gateway pre xes (H.323 only)
external_line_pre x
Valid values: e.g. <0>, <111>
Default: blank
Description: Pre x used for reaching
outside numbers via an H323 gateway.
This pre x will be replaced by the
gateway_pre x in a dialled number for
calling outside numbers (see gateway_
pre x).
gateway_pre x
Valid values: e.g. <*5>
Default: blank
Description: Pre x with which an ISDN
gateway is registered at the gatekeeper.
The phone will replace this pre x with the
external_line_pre x in a dialled number if
it is starting with the external_line_pre x
(see external_line_pre x).
Hence the user doesn’t have to dial
numbers like 5*1234567 but can instead
dial 01234567 with the same effect.
PBX key codes (H.323 only)
key_seq_hold_on
Valid values: For example <*1>
Default: blank
Description: Key code that is sent by the
phone to the PBX if it is set and the “R”
(hold on) key is pressed on the phone.
key_seq_hold_off
Valid values: For example <*2>
Default: blank
Description: Key code that is sent by the
phone to the PBX if it is set and the “R”
(hold off) key is pressed on the phone.
key_seq_transfer_blind
Valid values: e.g. <*60#>
Default: blank
Description: Key code that is sent by the
10
snom technology AG
[ F REQUENTLY A S K E D Q U E S T I O N ]
phone to the PBX if it is set and the “Xfer”
key is pressed on the phone for a blind
transfer.
key_seq_transfer_consultation
Valid values: e.g. <*6>
Default: blank
Description: Key code that is sent by
the phone to the PBX if it is set and the
“Xfer” key is pressed on the phone for a
consultation transfer. The phone needs
to have 2 active calls in order to use this
feature.
key_seq_divert
Valid values: For example <*3>
Default: blank
Description: Key code that is sent by the
phone to the PBX if it is set and redirection
is active with a redirection number.
key_seq_conf_on
Valid values: For example <*3>
Default: blank
Description: Key code that is sent by
the phone to the PBX if it is set and the
“Cnf.On” key is pressed on the phone.
key_seq_conf_off
Valid values: e.g. <*30>
Default: blank
Description: Key code that is sent by
the phone to the PBX if its set and the
“Cnf.Off” key is pressed on the phone.
key_seq_pickup
Valid values: e.g. <#11>
Default: blank
Description: Key code that is sent by the
phone to the PBX to pick up an alerting
call. This is activated by pressing the
‘pickup’ key when the key_seq_pickup is
set.
key_seq_end
Valid values: e.g. <#>
Default: blank
Description: The end symbol that is
automatically appended to the above
key codes before they are sent to the
PBX. The end symbol marks the end
of a key code sequence.
key_single_call_mode
Valid values: <true>, <false>
Default: true
Description: Set to <true> the phone
simulates a simple analog phone which
is able to handle one call in parallel only.
Codec and DTMF settings
codec_name
Valid values: <ulaw>, <alaw>, <gsm>,
<g729> (also <g722>, <g723> for
snom190 only)
Default: ulaw
Description: Name of the preferred
codec.
packet_size
Valid values: <80>, <160>, <240>,
<320>
Default: 160
Description: Packet size in bytes. Affects
only ulaw and alaw codecs (other codecs
have xed packet size). 80 (10 ms), 160
(20 ms), 240 (30 ms) and 320 (40 ms)
bytes are available.
dtmf_type_outofband
Valid values: <true>, <false>
Default: true
Description: Options for Out of band
DTMF. <true> forces the use of Out of
band DTMF, <false> turns it off. Its used
for H.323 only !
snom phones con guration
11
[ F REQUENTLY A S K E D Q U E S T I O N ]
dtmf_type_inband
Valid values: <true>, <false>
Default: on
Description: Options for In band DTMF.
<true> forces the use of In band DTMF,
<false> turns it off. Its used for H.323
only !
dtmf_payload_type
Valid values: Integer values, e.g.
<100>, <150>.
Default: 101
Description: Payload type for Out of
band DTMF.
codec_negotiation
Valid values: <single>, <full>,
<interoperable>
Default: Interoperable
Description: <single> option offers only
the preferred codec. <full> offers all
codecs and answers with all codecs too.
<interoperable> option offers all codecs,
but answers with the preferred one.
Base Network Settings
ip_adr
Valid values: e.g. <192.168.0.50>
Default: Blank
Description: The IP address of the device.
This parameter is mandatory in order to
enable the ethernet connection.
netmask
Valid values: e.g. <255.255.255.0>
Default: Blank
Description: The netmask for the device.
This parameter is mandatory in order to
enable the ethernet connection.
phone_name
Valid values: e.g. <phone1>
Default: Blank
Description: Hostname of the phone. If
this parameter is available, it is used for
identifying the device in SIP signalling.
gateway
Valid values: e.g. <192.168.0.1>,
<10.0.0.1>
Default: Blank
Description: The IP address of the default
IP gateway (not the VoIP gateway!!!). It
is the address to which the packets get
routed if the wanted packet address is
not in the current subnet. Setting up this
parameter is mandatory in order to reach
an external network.
dhcp
Valid values: <true>, <false>
Default: true
Description: Use DHCP (<true>) or do
not use DHCP (<false>).
timezone
Valid values: <USA-10>, <USA-9>,
<CAN-8>, <MEX-8>, <USA-8>, <CAN-
7>, <MEX-7>, <USA-7>, <CAN-6>,
<CHL-6>, <MEX-6>, <USA-6>, <BHS-
5>, <CAN-5>, <CUB-5>, <USA-5>,
<CAN-4>, <CHL-4>, <PRY-4>, <BMU-
4>, <FLK-4>, <CAN-3.5>, <GRL-3>,
<PRT-1>, <FRO-0>, <IRL-0>, <PRT-
0>, <ESP-0>, <GBR-0>, <ALB+1>,
<AUT+1>, <BEL+1>, <CAI+1>,
<CHA+1>, <HRV+1>, <CZE+1>,
<DNK+1>, <FRA+1>, <GER+1>,
<HUN+1>, <ITA+1>, <LUX+1>,
<MAK+1>, <NLD+1>, <NAM+1>,
<NOR+1>, <POL+1>, <SVK+1>,
<ESP+1>, <SWE+1>, <CHE+1>,
<GIB+1>, <YUG+1>, <BLR+2>,
<BGR+2>, <CYP+2>, <EGY+2>,
<EST+2>, <FIN+2>, <GAZ+2>,
<GRC+2>, <ISR+2>, <JOR+2>,
<LVA+2>, <LBN+2>, <MDA+2>,
<RUS+2>, <ROU+2>, <SYR+2>,
<TUR+2>, <UKR+2>, <IRQ+3>,
<RUS+3>, <IRN+3.5>, <ARM+4>,
<AZE+4>, <GEO+4>, <KAZ+4>,
<RUS+4>, <KAZ+5>, <KGZ+5>,
<PAK+5>, <RUS+5>, <IND+5.5>,
12
snom technology AG
[ F REQUENTLY A S K E D Q U E S T I O N ]
<KAZ+6>, <RUS+6>, <CHN+7>,
<RUS+7>, <SGP+7>, <KOR+8>,
<JPN+9>, <AUS+9.5>, <AUS+10>,
<RUS+10>, <AUS+10.5>, <NZL+12>,
<RUS+12>, <NZL+12.75>, <TON+13>
Default: Blank
Description: Timezone string, if set, it
sets utc_offset and dst automatically !
utc_offset
Valid values: e.g. in Germany it is
<+3600>.
Default: Blank
Description: Signed UTC offset in
seconds. See timezone also.
dst
Format: offset mm.ww.dd hh:mm:ss
mm.ww.dd hh:mm:ss
Valid values: e.g. for Germany <3600
03.05.07 02:00:00 10.05.07 03:00:00>
Default: Blank
Description: Daylight saving time that
observes yearly change and leap years.
See timezone also.
ntp_server
Valid values: e.g. <192.53.103.103>
Default: 192.53.103.103
Description: Address of the NTP time
server.
Advanced Network Settings
dns_domain
Valid values: e.g. <company.com>
Default: Blank
Description: The DNS domain. This
parameter is mandatory in order to
enable DNS searching.
dns_server1, dns_server2
Valid values: e.g. <194.25.2.129>
Default: Blank
Description: Server that may be used for
DNS searches. Setting up one of these
parameters is mandatory in order to
enable DNS searching.
http_user, http_pass
Valid values: character strings, e.g.
<john>, <jh24>
Default: Blank
Description: Username and password for
accessing the embedded webserver on
the phone.
http_proxy
Valid values: IP address or url
Default: Blank
Description: Sets the http proxy for
outgoing http requests.
http_port
Valid values: e.g. <80>, <8080>
Default: 80
Description: Sets the port for http
requests.
https_port
Valid values: e.g. <80>, <8080>
Default: 443
Description: Sets the port for https
requests.
webserver_type
Valid values: <http>, <https>, <http_
https>, <off>
Default: http_https
Description: Sets the connection type of
http requests which are allowed.
lcserver1, lcserver2
Valid values: e.g. <192.168.0.26>
Default: Blank (to use local LCServer on
device)
Description: IP addresses of an
snom phones con guration
13
[ F REQUENTLY A S K E D Q U E S T I O N ]
alternative remote LCServer. You will not
usually need to change this setting, its for
snom internal use only.
vlan
Valid values: integers separated by a
space, e.g. <
128 5
>
Default: Blank
Description:
VLAN
ID (0..4095) and
Priority (0..7) separated by a space
Update
update_policy
Valid values: <auto_update>, <ask_
for_update>, <never_update_ rm>,
<never_update_boot>, <settings_only>,
<never_update>
Default: settings_only
Description: Determines the update
behaviour of the phone. <never_
update> does not connect a server
regarding settings or updates at all,
<settings_only> loads settings only from
settings server. <auto_update> does
not ask again, if you are really sure to
update.
rmware_interval
Valid values:
amount in minutes
Default: 1440 (24*60)
Description:
The phone polls by default
each 24 hours for a new rmware. If you
want to change that, it has to be set to
the amount of minutes after a new poll
request should be performed.
setting_server
Valid values: e.g. <http:
//www.company.com/settings/
snom200.htm>, <130.149.12.54>
Default: blank
Description: URL of the settings le.
rmware_status
Valid values: e.g. <http://
www.company.com/settings/snom200-
rmware.htm>
Default: Blank
Description: URL of the con g le that
consists of the bootloader and rmware
setting, see below.
bootloader, rmware
Valid values: e.g. <http:
/ / w w w . c o m p a n y . c o m / f i l e s /
snom200ABC.bin>, <130.149.12.54>
Default: Blank
Description: URL of the image le for
bootloader or rmware respectively.
Miscellaneous
preselection_nr
Valid values: Integer values & ‘+’ e.g.
<001>, <+491234567>
Default: blank
Description: If a number is entered in
this option, the phone dials this pre-
selected number automatically every
time the phone is taken off the hook. This
is particularly useful for using calling/
prepaid cards etc.
mute
Valid values: <true>, <false>
Default: false
Description: Mute <true> the
microphone.
disable_speaker
Valid values: <true>, <false>
Default: false
Description: Disable <true> casing
speaker.
headset_device
Valid values: <none>, <external>,
<headset_rj>
Default: none
Description: Select wether you want to
14
snom technology AG
[ F REQUENTLY A S K E D Q U E S T I O N ]
use a headset with pc or rj connector or
not.
mwi_noti cation
Valid values: <silent>, <beep>,
<reminder>
Default: silent
Description: Do you want to get
reminded that you have messages
waiting or don’t you ?
release_sound
Valid values: <true>, <false>
Default: true
Description: Usually the phone plays a
short sound after the other party ended
the call. You can switch that off with
<false>.
Other Settings
DND_mode
Valid values: <true>, <false>
Default: False
Description: <true> means that the
phone is in “do not disturb” (DND) mode,
<false> is normal behavior.
edit_alpha_mode
Valid values: <123>, <abc>, <ABC>,
<kana>
Default: <123>
Description: Preferred or default editing
mode for typing in phone numbers/
addresses unless the user changes it by
dialing a different type of phone number.
tone_scheme
Valid values: <AUS>, <CHN>, <GER>,
<IND>, <JPN>, <MEX>, <GBR>,
<USA>
Default: blank
Description: Country speci c scheme of
phone audio signals, like free tone, busy
tone etc.
ring_sound
Valid values: <Ringer1>, <Ringer2>,
<Ringer3>, <Ringer4>, <Ringer5>,
<Ringer6>, <Ringer7>
Default: Ringer1
Description: Default selection of the ring
tone style that signals incoming calls. See
“ring_source” also.
family_ring_sound, friends_ring_sound,
colleagues_ring_sound
Valid values: <Ringer1>, <Ringer2>,
<Ringer3>, <Ringer4>, <Ringer5>,
<Ringer6>, <Ringer7>
Default: Ringer1
Description: Phonebook contact type
speci c ringers. Selection of the ring
tone style that signals incoming calls
dependend on the contact type of the
caller in the local phonebook. See also
“ring_source”.
ring_source
Valid values: <source>, <destination>
Default: source
Description: De nes if the local phone
(destination) or the remote phone
(source) determines the ring tone style
on an incoming call.
vol_speaker
Valid values: Between <0> and <15>
Default: 8
Description: Selection of the casing
speaker volume.
vol_headset
Valid values: Between <0> and <15>
Default: 8
Description: Selection of the headset
speaker volume.
vol_handset
Valid values: Between <0> and <15>
Default: 8
Description: Selection of the handset
speaker volume.
snom phones con guration
15
[ F REQUENTLY A S K E D Q U E S T I O N ]
auto_connect
Valid values: <true>, <false>
Default: False
Description: If it is <true>, the phone
will automatically answer incoming
calls.
auto_connect_type
Valid values: <auto_connect_type_
handsfree>, <auto_connect_type_
handset>
Default: auto_connect_type_handsfree
Description: If the above setting auto_
connect is <true>, auto_connect_type
determines whether the auto-answered
incoming call switches the phone to
handsfree mode or normal handset
mode.
log_level
Valid values: Between <0> and <9>
Default: 5
Description: Log level of the
maintenance web page, 9 is the most
verbose mode.
Key Mapping
fkey[0-4]
Valid values: <line>, <dest>, <icom>,
<orbit>, <recorder>, <dtmf>, e.g. “dest
kd@company.org”
Default: line
Description: Changes the meaning of the
programmable keys. See the user/admin
manual for more info. <dtmf> is for
H323 only.
break_key
Valid values: <true>, <false>
Default: true
Description: Change the behaviour of
the key below the casing speaker key to
either break <true> or transfer <false>
functionality, valid for snom200 only.
no_dnd
Valid values: <true>, <false>
Default: false
Description: Switch off the DND
functionality at all with <true>.
Europe & ROW:
snom technology AG
Pascalstr. 10B
10587 Berlin, Germany
Phone: +49 (30) 39833-0
mailto:[email protected]
http://www.snom.com
India and SAARC:
snom technology (India) Pvt Ltd.
No. 417, International Trade Tower
Nehru Place, New Delhi-110019
Phone: +91 11 26234097
Fax: +91 11 26234079
http://www.snomindia.com
mailto:[email protected]
USA and Americas:
snom USA Representation
ABP International, Inc.
1203 Crestside Dr.
Coppell, Texas 75019, USA
Phone: +1-972-831-0280
mailto:[email protected]
© 2004 snom technology AG
All rights reserved.
Other manuals for phones
1
Table of contents
Other Snom Software manuals
Snom
Snom Configuring snom phones for Mass Deployment Instruction Manual
Snom
Snom snomONE-ST410 User manual
Snom
Snom 4S Media Server Instruction Manual
Snom
Snom snomONE-ST402 User manual
Snom
Snom 4S NAT Filter User manual
Snom
Snom snomIPP-ST314 User manual
Snom
Snom phones Instruction Manual
Snom
Snom 4S Media Server Instruction Manual
