SNOWSOUND TRI BU 584-A/L0 User manual

TRI BU
Design: Paola Navone - Otto Studio
27.17x13.39in. 37.8x16.14in. 23.23x22.05in. 24.8x11.81in.
400460XX400460XX400460XX400460XX
1/4
X3
40025843
X3
X12
X3
f
h
d
e
X1
X1
11- Place the paper templates on the back of the panel.
ATTENTION: Hold the letter F towards the panel
2- Mark the panel in correspondence with the holes
a
a1
a1 b1 c1
X1
X1
b
b1
X1
X1
c
c1
X1
X1
m
m1
m1
b
ac m
Distributed by Snowsound USA
584-A/ L0
M O D.

2
3
2/4
1- Place the paper templates on the wall to form the desired composition.
ATTENTION: Keep the letter F on the front
2- Mark the wall in correspondence with the holes
f
f
b
a
c
a1 b1 c1
f
h
h
b
a
c
m
m
f
m1

3/4
e
d
a
bf
c
5
4
d
e
MAX 2,76in
OK OK
NO NO
WARNING: the screw head must not protrude from the magnet
e
e

4/4
NO
- keep a way from
hea t sources
N O N O
N O N O
N O
N O F
OK N O
Congratulations on your latest SNOWSOUND purchase. Follow these instructions and you'll have this new product mounted in no time. If you
need any help, or to order replacement/missing parts, please call 1-800-747-2660 or email "[e-mail]"
NOTE!
Prior to assembling and installing the unit please read the following notes carefully.Pay particular attention to the drawings in the
assembly instructions.Please consult these notes every time the product is assembled and/or installed.
1.The product must only be assembled and installed by qualified contractors. Warning: once the product has been assembled always check
that the structure is suitable for the type of application and/or use to which it will be put. These products are not suitable for use by children.
2. Prior to installation check the load bearing capacity of the surface on which the product is to be fitted :use suitable fixtures according to the
type of surface which must be able to withstand the forces generated.
3. Warning: if you have any doubts concerning how to install the product and/or the load bearing capacity of the surface on which it will
fitted,do not fit it. 4. Do not use detergents to clean the parts that are not in textile fabric. Use only a cloth damp with water. 5. To clean
the panel (a) use only a dry stain removal, carefully following the instructions on the product used.
6. For further information on how to install the product,please contact your dealer. For any use different from the ones here shown please
contact the dealer.