SnowWolf QuattroPlow QP-102 Manual

!
Operation & Maintenance Manual
REMEMBER: Register your product! No claims for warranty shall be considered unless your product
registration card is completed online within 30 days of purchase. Go to: snowwolfplows.com/registration.
QP Models 6,000 - 10,000 lb.
QPHD Models 15,000 - 30,000 lb.
QPXT Models 10,000 - 15,000 lb. QuattroPlow™
05/2020

MANUFACTURER'S WARRANTY
Two-Year Limited Warranty
SNOWWOLF International, hereinafter referred to as SNOWWOLF, warrants new SNOWWOLF SNOW
PLOWS at the time of delivery to the original purchaser, to be free from defects in material and
workmanship when properly set up and operated in accordance with the recommendations set forth by
SNOWWOLF.
SNOWWOLF'S liability for any defect with respect to accepted goods shall be limited to repairing the
goods at a SNOWWOLF designated location or at an authorized dealer location, or replacing them as
SNOWWOLF shall elect. The above shall be in accordance with SNOWWOLF warranty adjustment
policies. SNOWWOLF'S obligation shall terminate twenty-four (24) months after the delivery of the goods
to original purchaser including cutting edge breakage or wear. This warranty shall not apply to any
machine or attachment which shall have been repaired or altered outside the SNOWWOLF factory or
authorized SNOWWOLF dealership or in any way so as in SNOWWOLF'S judgment, to affect its stability
or reliability, nor which has been subject to misuse, negligence or accident beyond the Company
recommended machine rated capacity.
Warranty Claim
To submit a warranty claim, a return authorization from SNOWWOLF must be obtained. The failed part
may then be returned. Tampering with the failed part may void the warranty. This warranty does not
include freight or delivery charges incurred when returning machinery for servicing. Dealer mileage,
service calls, and pickup/delivery charges are the customers' responsibility.
Exclusions of Warranty
Except as otherwise expressly stated herein, SNOWWOLF makes no representation or warranty of any
kind, expressed or implied, AND MAKES NO WARRANTY OF MERCHANTABILITY IN RESPECT TO
ITS MACHINERY AND/OR ATTACHMENTS ARE FIT FOR ANY PARTICULAR PURPOSE. SNOWWOLF
shall not be liable for incidental or consequential damages for any breach of warranty, including but not
limited to inconvenience, rental of replacement equipment, loss of profits or other commercial loss. Upon
purchase, the buyer assumes all liability for all personal injury and property resulting from the handling,
possession, or use of the goods by the buyer.
No agent, employee, or representative of SNOWWOLF has any authority to bind SNOWWOLF to any
affirmation, representation or warranty concerning its machinery and/or attachments except as specifically
set forth herein.
This warranty policy supersedes any previous documents.
No claims for warranty shall be considered unless warranty registration is sent to SNOWWOLF
within 30 days of purchase!
Manufactured By:
14311 Ewing Avenue
Burnsville, MN 55306
www.snowwolfintl.com

1
QuattroPlow Operation and Maintenance Manual
Introduction..........................................................................................................................................5
Owner Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Serial Number Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Attachment Identification, QP and QPXT Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Attachment Identification, HD Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
QP Models Standard Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
QP Models Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
QPXT Models Standard Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
QPXT Models Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
QPHD Models Standard Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
QPHD Models Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Safety.....................................................................................................................................................11
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Safe Operation Needs A Qualified Operator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Importance of Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Operation.............................................................................................................................................17
General Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Pre-Operation Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Attachment Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Daily Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Monthly Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Attachment Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Entering The Operator’s Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Leaving The Operator’s Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Connecting Attachment To The Machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Hydraulic Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Checking QuattroPlow Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Operating The Attachment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Attachment Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Maintenance.......................................................................................................................................27
Maintenance Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
General Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
QuattroPlow Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Cutting Edge Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Cutting Edge Trip Spring Adjustment / Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Wear Shoe Adjustment / Replacement (if equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Side Wing Cutting Edge Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

2QuattroPlow Operation and Maintenance Manual
Wing Cutting Edge Upgrade Kit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Storage And Return To Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Return to Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Parts......................................................................................................................................................37
Models QP102, QP114, QP126, QP138 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Options (QP Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Side Wing (QP Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Hydraulics QP102, QP114, QP126, QP138 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Hydraulic Hoses (QP Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Hydraulic Components (QP Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Trip Edge Generations (QP Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Decal Identification (QP Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Models QPXT126, QPXT138, QPXT150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Options (QPXT Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Side Wing (QPXT Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Hydraulics QPXT126, QP1XT138, QPXT150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Hydraulic Hoses (QPXT Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Hydraulic Components (QPXT Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Decal Identification (QPXT Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Models QPHD146, QPHD170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Options (QPHD Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Side Wing (QPHD Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Hydraulics QPHD146, QPHD170 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Hydraulic Hoses (QPHD Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Hydraulic Components (QPHD Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Decal Identification (QPHD Models). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Options (Model Specific) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Hydraulic Manifold AutoWing (QP and QPXT Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Hydraulic Manifold PowerWing, QP-PW (QP and QPXT Models). . . . . . . . . . . . . . . . . . . 76
Hydraulic Manifold AutoWing (HD Models). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Power Wing Upgrade QPHD-PW (HD Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Active Edge, 18” Sectional Blade (QP and QPXT Models) . . . . . . . . . . . . . . . . . . . . . . . . 79
Active Edge, 24” Sectional Blade (QP and QPXT Models) . . . . . . . . . . . . . . . . . . . . . . . . 80
Flex Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

3
QuattroPlow Operation and Maintenance Manual
Specifications....................................................................................................................................83
Attachment Specifications (QP Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Dimensions (QP Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Attachment Specifications (QPXT Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Dimensions (QPXT Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Attachment Specifications (QPHD Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Dimensions (QPHD Models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Torque Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91