Form 1-653 R5
January, 2006
Models CP7.5, CP 8.0, CP 8.5, CP 9.0
Parts & Installation Instructions
Polyethelene Snow Plows
Meyer Products reserves the right, under its continuing product improvement program, to change construction or design details, specifications and
prices without notice and without incurring any obligation.
Parts indented are included in the assembly under which they are indented.
PARTS LIST
Item CP 7.5 Qty CP 8.0 Qty CP 8.5 Qty CP 9.0 Qty Description
09245 1 09246 1 09247 1 09252 1 Moldboard Assembly
1 12071 1 12000 1 12010 1 12125 1 • Moldboard Frame
2 12371 2 12371 2 12371 2 12371 2 • R.I. Outside rib
3 12372 2 12372 2 12372 2 12372 2 • R.I. Inside bottom rib
4 12376 2 12376 2 12376 2 12376 2 • R.I. Inside pivot rib
5 12377 2 12377 2 12377 2 12377 2 • R.I. Inside top rib
6 12072 1 12008 1 12015 1 12129 1 • Plastic Sheet
7 12073 1 12009 1 12014 1 12130 1 • Snow Deflector
8 12487 1 12497 1 12498 1 12031 1 • Bar Reinforcement
9 12491 1 12492 1 12499 1 12116 1 • Angle Support
10 09796 1 09133 1 09134 1 07259 1 • Cutting Edge
11 08692 1 08692 1 08692 1 -------- • Bolt C 1/2-13 x 1-3/4”
------- ----- ------- ----- ------- ----- -------- & Locknut (Kit of 10 each)
------- ----- ------- ----- ------- ----- 08318 1 • Bolt C 5/8-11 x 2-1/4” Gr. 5
------- ----- ------- ----- ------- ----- ------- & Locknut (Kit of 12 each)
12 22193 9 22193 10 22193 10 22193 10 • Bolt H 3/8-16 x 1” Gr.2
13 22191 6 22191 6 22191 8 22191 10 • Bolt C 3/8-16 x 1” Gr. 1
14 20307 22 20307 22 20307 24 20307 19 • Locknut Esna 1/2-13
15 20314 15 20314 16 20314 18 20314 20 • Locknut 3/8-16
16 20353 24 20353 26 20353 28 20353 30 • Flat Washer 3/8
17 22190 14 22190 14 22190 15 22190 19 • Bolt C 1/2-13 x 1-3/4” Gr. 5
12078 1 12024 1 12025 1 12131 1 Snow Deflector Kit
18 09126 2 09126 2 09126 2 09126 2 • Runner & Spindle Assembly
19 07006 1 07006 1 07006 1 07006 1 •• Runner
20 12057 1 12057 1 12057 1 12057 1 •• Spindle
21 20363 10 20363 10 20363 10 20363 10 •• Flat Washer 1-1/4”
22 22083 1 22083 1 22083 1 22083 1 •• Linch Pin
23 20101 1 20101 1 20101 1 20101 1 •• Bolt H-1/2-13 x 3”
24 20307 1 20307 1 20307 1 20307 1 •• Locknut 1/2-13
08341 1 08341 1 08341 1 08341 1 Snow Plow Hardware Bag
25 09119 2 09119 2 09119 2 09119 2 • Pivot Pin w/Fttg.& Hair Pin
26 07031 4 07031 4 07031 4 07031 4 • Eye Bolt Cap
07996 1 07996 1 07996 1 07996 1 • Cable Tie
27 09124 4 09124 4 09124 4 09124 4 • Eye Bolt W/ Locknut
28 09125 1 09125 1 09125 1 09125 1 • King Bolt W/ Locknut
29 11101 2 11101 2 11101 2 11101 2 • Hinge Pin
30 22083 2 22083 2 22083 2 22083 2 • Linch Pin
-------- -------- -------- -------- Sector and A-Frame Carton
31 12793 1 12793 1 12793 1 12793 1 • Sector
-------- ------- -------- -------- • A-Frame
32 07017 4 07017 4 07017 4 07017 4 • Trip Spring
09916 1 09916 1 09916 1 09916 1 • Marker Kit
33 13004 1 13004 1 13004 1 13004 1 • Sector Shear Pin
8
7
13
16
12
17
11
14
23
19
24
22
21
31
25
30
29
1
20
32
15
28
33
18
27 26
2, 3, 4, 5
10
6
16
RIGHT SIDE
VIEW OF
MOLDBOARD
9
1416
