Socket Bluetooth Connection Kit User manual

Bluetooth™ Connection Kit
Featuring the Socket Bluetooth Card™ and
Windows CE software for adding Bluetooth wireless
connectivity to the following mobile computers:
• Pocket PCs
• Pocket PC 2002s
• Handheld PC 2000s
• Handheld PC Pros
User’s Guide

How this Manual is Organized
This manual is designed to help you install and use the Socket Bluetooth
Connection Kit.
Chapter 1, Introduction, describes key features of the Bluetooth
Connection Kit and identifies package contents.
Chapter 2, Basic Setup, explains the minimum steps you need to complete
to install and use the Bluetooth Card.
Chapter 3, Advanced Features, shows additional steps you may choose to
perform while installing and/or operating the Bluetooth Card.
These optional steps include: setting up your Bluetooth Card, viewing
device properties, setting up your favorite device, using the Bluetooth
Device Discovery Wizard, using the Bluetooth Device Bonding Wizard,
changing views, and deleting an item from the Bluetooth Devices manager.
Chapter 4, The Socket Dialer, explains how to install the Socket Dialer,
assign a dialing prefix, and use the program to dial a number directly from
your Contacts folder.
Chapter 5, Printing, explains how to print using the PrintPocketCE program
included on the Bluetooth Connection Kit Installation CD.
Appendix A, Specifications, provides technical specifications for the
Bluetooth Card.
Appendix B, Safety and Usage Tips, lists guidelines you should follow to
use the Bluetooth Card safely and efficiently, including information about
product care, antenna care, use while driving or in an aircraft, and radio
frequency exposure.
Appendix C, Troubleshooting, gives advice for fixing the most common
problems you may encounter using the Bluetooth Card.
Appendix D, Technical Support, explains Socket’s technical support
policy for the Bluetooth Card.

TABLE OF CONTENTS | 3
Table of Contents
CHAPTER 1 INTRODUCTION 4
Overview 4
Contents of the Connection Kit 5
Installation Steps Summary 6
CHAPTER 2 BASIC SETUP 7
STEP 1: Install the Software 7
STEP 2: Insert the Card 10
STEP 3: Get Connected! 11
STEP 4: Dial-up Networking 15
CHAPTER 3 ADVANCED FEATURES 19
Turn Radio Transmitter ON/OFF 20
Set up Your Bluetooth Card 21
View Device Properties 22
Set up Your Favorite Device 23
Discover Bluetooth Device(s) 24
Bond with Discovered Device(s) 25
CHAPTER 4 THE SOCKET DIALER 29
Assign a Dialing Prefix 29
Use the Socket Dialer 30
CHAPTER 5 PRINTING 32
APPENDIX A SPECIFICATIONS 35
APPENDIX B SAFETY AND USAGE TIPS 36
APPENDIX C TROUBLESHOOTING 38
APPENDIX D TECHNICAL SUPPORT 40
LIMITED WARRANTY 41
LIMITED SOFTWARE WARRANTY 42
COPYRIGHT NOTICE 43
REGULATORY COMPLIANCE 44

4 | CHAPTER 1: INTRODUCTION
Chapter 1 Introduction
Overview
The Socket Bluetooth Connection Kit makes it easy to add Bluetooth
wireless connectivity to a Windows Powered Pocket PC (including Pocket
PC 2002s) or a Windows CE-based HPC 2000 or Handheld PC Pro. It’s
perfect for connecting any of these mobile computers wirelessly to your
favorite Bluetooth phone or printer.
The Bluetooth Card is the only plug-in card to
incorporate all Bluetooth components within the
CompactFlash Type I form factor. With a
CompactFlash-to-PC Card adapter, the Bluetooth Card
also works in a PC Card (PCMCIA) slot.
You can purchase adapters separately online at:
www.esend.com/socket/product.asp?sku=AC4000%2
D978
The Bluetooth Connection Kit includes a Bluetooth Card and Bluetooth
software, including drivers, the Get Connected! Wizard, the Bluetooth
Devices manager, and the Socket Dialer.
For quickly connecting your mobile computer to a Bluetooth phone, use the
Get Connected! Wizard. To connect to a non-phone device, use the
advanced features found in the Bluetooth Devices manager. After
connecting to a Bluetooth phone, you can use the Socket Dialer to directly
dial a number from your Contacts list.
This User’s Guide explains how to install and use the Bluetooth Card.
This guide primarily shows Pocket PC screens. Except where otherwise
noted, Pocket PC 2002s, HPC 2000s and Handheld PC Pros will have
functionally equivalent screens.
To register the Bluetooth Connection Kit, please visit:
http://www.socketcom.com/product/prodreg.htm
For software updates, please check: www.socketcom.com

CHAPTER 1: INTRODUCTION | 5
Contents of the Connection Kit
The Socket Bluetooth Connection Kit includes these items:
• A Socket Bluetooth Card (CompactFlash card Type I)
• The Socket Bluetooth Connection Kit Installation CD
• The Quick Start Guide for Bluetooth Connection Kit
• A registration card
To register the kit online, visit: www.socketcom.com/product/prodreg.htm

6 | CHAPTER 1: INTRODUCTION
Installation Steps Summary
The most basic installation and operation of the Bluetooth Card can be
completed in only four steps. There are also several advanced features you
can choose to perform, as well as the Socket Dialer program you may want
to install and use.
BASIC SETUP AND USE
STEP 1: Install the software.
STEP 2: Insert the Bluetooth Card into your mobile computer.
STEP 3: Get Connected!
STEP 4: Set up dial-up networking.
OPTIONAL: ADVANCED FEATURES
• Set up your Bluetooth Card.
• Use the Bluetooth Devices manager.
- View device properties.
- Set up your favorite device.
- Discover other Bluetooth device(s).
- Bond with another Bluetooth device.
- Change views.
- Delete a device from your folder.
OPTIONAL: SOCKET DIALER
• Assign a dialing prefix.
• Dial a contact.
Note: There are some important safety and usage guidelines you should
read before operating the Bluetooth Card. Please refer to Appendix B,
“Safety and Usage Tips.”

CHAPTER 2: BASIC SETUP | 7
Chapter 2 Basic Setup
This chapter covers the minimum steps you must complete to install and
operate the Bluetooth Card. The four steps detailed in this chapter include
installing software, inserting the card, getting connected, and setting up dial-
up networking.
STEP 1: Install the Software
Follow these steps BEFORE inserting the Bluetooth Card:
1. Make an active partnership between the mobile computer and a host PC.
An active partnership exists if data can be moved between the mobile
computer and the host PC via a serial/USB/Ethernet cable or cradle.
2. Insert the Socket Bluetooth Card Installation CD into the host PC.
3. Run the SETUP.HTM or SETUP.EXE file on the CD-ROM, depending
on what web browser your host PC uses by default.
IF YOUR DEFAULT WEB BROWSER IS
INTERNET EXPLORER, run the SETUP.HTM file:
(a) Click Start | Run on the host PC. Type X:\SETUP.HTM
(Replace X with your CD drive letter.)
(b) In File Download, select the option that lets you run (or open) the file.
IMPORTANT! YOU MUST RUN THE FILE! DO NOT SAVE IT!
File Download screen from Internet Explorer 5.5
(c) A Security Warning screen will appear. Click Yes.

8 | CHAPTER 2: BASIC SETUP
IF YOUR DEFAULT WEB BROWSER IS
NETSCAPE, DO NOT run the SETUP.HTM file on
Netscape. Instead, choose either of two options:
OPTION ONE: Use Internet Explorer to run the SETUP.HTM file.
(a) In the Internet Explorer screen, click File | Open.
(b) In the Open screen, type X:\SETUP.HTM
(Replace X with your CD drive letter.)
Open screen from Internet Explorer 5.5
(c) Proceed with the instructions described on the previous page for
Internet Explorer.
OPTION TWO: Run the SETUP.EXE file.
Click on My Computer or use Windows Explorer to manually browse the
CD to the WinCE (or other appropriate directory) and manually launch
the SETUP.EXE file found there.
Important! Be sure to choose the SETUP.EXE file, NOT the
SETUP.HTM file. The two file types have different icons:
EXE icon HTM icon for Netscape
4. Follow the instructions on the host PC screen until installation is done.
5. After completing setup, your host PC may display an Application
Downloading Complete. Click OK.
6. In the Dialog screen, enter a name for the mobile computer. Tap ok.

CHAPTER 2: BASIC SETUP | 9
7. If desired, install the Socket Dialer. This program lets you dial a
number directly from your Contacts list.
8. Disconnect the mobile computer from the host computer. Soft reset the
mobile computer. Push the reset button, often on the back of the device.

10 | CHAPTER 2: BASIC SETUP
STEP 2: Insert the Card
Important!
Do NOT insert the card upside down or shove the card in too hard.
Damage may occur!
Insert the card into your mobile computer’s slot. If using a PC Card slot,
first insert the Bluetooth Card into a CompactFlash-to-PC Card adapter
(available separately). Make sure the blue label is on top.
When properly inserted, the card unit will be fully contained within the slot.
After the mobile computer recognizes the card, the following will occur:
• You will get a message warning against using Bluetooth on airplanes.
Tap OK.
• The Bluetooth icon will appear in the task tray (visible in the Today
screen for Pocket PCs and Pocket PC 2002s).
Insert the card
directly into a
CompactFlash
I
/O slot…
…or plug the card into
an adapter for use in a
PC Card slot.

CHAPTER 2: BASIC SETUP | 11
STEP 3: Get Connected!
The Get Connected! Wizard guides you through a one-time setup process
that prepares the mobile computer and phone for Bluetooth connections.
The wizard varies depending on what phone you want to connect to.
Ericsson, Nokia, Sony Phones
1. Tap on the Bluetooth task tray icon (in the Today screen for Pocket
PCs and Pocket PC 2002s). In the pop-up menu, tap Get Connected!
2. Follow the Bluetooth “Get Connected!” Wizard.
Note: For HPCs, adjust the taskbar to reveal the entire wizard screen.
Go to Start | Settings | Taskbar. Select Auto hide. Tap OK.
3. In the welcome screen, use the drop-down list to select the type of
phone you are using. The wizard will provide tailored instructions based
on your selection.
Note: This example is for a Nokia phone. Your phone may differ.
4. As prompted, find out what kind of passkey system your phone uses.
Important! If your phone has a pre-assigned passkey, have it ready.
(e.g., The passkey of a Nokia phone is on a label in the box and/or on
the battery.)

12 | CHAPTER 2: BASIC SETUP
5. When the search is complete, a list of the discovered Bluetooth phones
will appear. Choose the phone you wish to connect to, and tap Select.
A service discovery phase will begin, about 5-10 seconds.
6. As prompted in the next screen, set your phone to “Bondable” or
“Pairable” mode. For instructions, refer to your phone manual.
Have your passkey ready, then tap Next>.
7. In the next screen, enter the passkey. Tap Reply.
Note: Exchanging passkeys allows the phone and mobile computer to set
up an encrypted data link for secure communications.
8. Enter the same passkey into the mobile phone. The mobile phone may
then either automatically accept the passkey or ask for you to enter one.
9. Tap Finish. After successfully connecting, the phone will appear in the
Bluetooth Devices folder. You will not need to run the Get Connected!
Wizard again unless you plan to switch between different phones.

CHAPTER 2: BASIC SETUP | 13
Motorola Timeport 270C
1. Tap on the Bluetooth task tray icon (visible from the Today screen
for Pocket PCs and Pocket PC 2002s). In the pop-up menu, select
Get Connected!
2. Follow the Bluetooth “Get Connected!” Wizard.
Note: For HPCs, adjust the taskbar to reveal the entire wizard screen.
Go to Start | Settings | Taskbar. Select Auto hide. Tap OK.
3. In the welcome screen, use the drop-down list to select the Motorola
Timeport 270C. The wizard will provide tailored instructions for this
phone.
4. As directed in the next two screens, assign the phone a unique name and
set the phone in Discoverable mode. Then tap Next>.
5. The mobile computer will begin to search for the phone. When the
search is over, a list of the discovered Bluetooth phones will appear.
Choose the phone you wish to connect to, and tap Select. A service
discovery phase will begin, about 5-10 seconds.

14 | CHAPTER 2: BASIC SETUP
6. The next two screens describe procedures you can only complete outside
of the wizard. Read through each screen but do not complete the
described procedures until you exit the wizard. Directions for these
procedures are provided in STEP 4: Dial-up Networking, starting on the
next page. The two procedures are:
Bonding with your phone — This must be completed in order to
complete the Bluetooth connection and involves dial-up networking.
Automatic Connections — This procedure is optional but will make
future Bluetooth connections more convenient.
7. Continue to the last screen of the wizard and tap Finish. Now proceed to
STEP 4 to complete the bonding process and, if desired, set up automatic
connections.

CHAPTER 2: BASIC SETUP | 15
STEP 4: Dial-up Networking
Before setting up dial-up networking, prepare yourself with dial-up
information and other necessary settings for your office network or ISP.
Pocket PCs and Pocket PC 2002s
1. Pocket PC — Go to Start | Settings | Connections | Modems. In the next
screen, tap New Connection…
Pocket PC 2002 — Go to Start | Settings | Connections. Tap on the
Connections icon. In the top field, select Internet Settings. Tap Modify…
In the next screen, tap New…
2. In the next screen(s), enter a name for the dial-up connection and select
Bluetooth Phone for the modem. Tap Advanced…
Note: Remember what you name the connection. You will need it when
you start the connection.
3. The Port Settings screen will appear. For Flow Control, select None.
If needed, tap on the TCP/IP and/or Name Servers screens to enter any
necessary settings for your office network or ISP. Tap OK.
4. Tap Next.
5. In the Phone number field, enter the dial-up number. Tap Next.
6. Uncheck Wait for dial tone before dialing. Tap Finish.

16 | CHAPTER 2: BASIC SETUP
7. Now you are ready to start the connection.
Pocket PC — Go to Start | Programs | Connections. Tap on the Bluetooth
connection you just set up. Make sure the correct dialing information is
entered, then tap Connect.
Pocket PC 2002 — When you return to the Connections screen, under
Internet Settings, tap Connect. In the next screen, make sure the correct
dialing information is entered. Tap OK.
8. FOR MOTOROLA TIMEPORT 270C ONLY:
After you tap Connect for the first time, the phone will display a message
asking if you want to bond. Enter YES. Make up a 4-8 digit passkey,
enter it on the phone, then enter it on the mobile computer.
After successfully bonding, you can set up the phone for automatic
connections.
Automatic Connections for Motorola:
• On the phone, press MENU.
• Scroll to Settings, then press SELECT.
• Scroll to Connection, then press ON.
• On Bluetooth Link, press SELECT.
• Scroll to Devices, then press SELECT.
• Choose your mobile computer, then press EDIT.
• Scroll to Access:Ask, then press CHANGE.
• Scroll to Automatic, then press SELECT. Press DONE.
9. To use a different Bluetooth phone for dial-up networking, you can use
the same connection setup, but you must make the new phone your
favorite. Just run the Get Connected! Wizard again, select the new phone,
and make it your new Favorite when prompted. Or you can use the
Bluetooth Devices folder to change your favorite phone (see page 23).

CHAPTER 2: BASIC SETUP | 17
Handheld PCs
1. Go to Start | Programs | Communication | Remote Networking |
Make New Connection.
2. In the next screen, enter a name for the Bluetooth connection.
Select Dial-Up Connection. Tap Next>.
2. Select Bluetooth Phone for the modem. Tap Configure…
3. The Port Settings screen will appear. For Flow Control, select None.
Enter any necessary settings for your office network or ISP.

18 | CHAPTER 2: BASIC SETUP
5. Tap on the Call Options tab. Uncheck Wait for dial tone before dialing.
Tap OK.
6. If needed, tap on TCP/IP to enter any special network settings for your
office network or ISP. Tap OK.
7. Tap Next>.
8. Enter the dial-up number for your office network or ISP. Tap Finish.
9. Now you are ready to start the connection.
Go to Start | Control Panel | Remote Networking. Tap on the Bluetooth
connection you just set up. Make sure the correct dialing information is
entered, then tap Connect.
8. FOR MOTOROLA TIMEPORT 270C ONLY:
After you tap Connect for the first time, the phone will display a message
asking if you want to bond. Enter YES. Make up a 4-8 digit passkey,
enter it on the phone, then enter it on the mobile computer.
After successfully bonding, you can set up the phone for automatic
connections.
Automatic Connections for Motorola:
• On the phone, press MENU.
• Scroll to Settings, then press SELECT.
• Scroll to Connection, then press ON.
• On Bluetooth Link, press SELECT.
• Scroll to Devices, then press SELECT.
• Choose your mobile computer, then press EDIT.
• Scroll to Access:Ask, then press CHANGE.
• Scroll to Automatic, then press SELECT. Press DONE.
9. To use a different Bluetooth phone for dial-up networking, you can use
the same connection setup, but you must make the new phone your
favorite. Just run the Get Connected! Wizard again, select the new phone,
and make it your new Favorite when prompted. Or you can use the
Bluetooth Devices folder to change your favorite phone (see page 23).

CHAPTER 3: ADVANCED FEATURES | 19
Chapter 3 Advanced Features
This chapter explains optional steps you may choose to perform while
installing and/or using the Bluetooth Card.
The steps covered in this chapter include:
• Turning the radio transmitter on/off
• Setting up your Bluetooth Card
• Viewing device properties
• Setting up a Favorite Device
• Using the Bluetooth Device Discovery Wizard
• Using the Bluetooth Device Bonding Wizard
• Changing views
• Deleting an item from the Bluetooth Devices folder

20 | CHAPTER 3: ADVANCED FEATURES
Turn Radio Transmitter ON/OFF
You may want to turn off the radio transmitter to save power or if you are
entering an area with radio restrictions.
1. After you insert the Bluetooth Card, the Bluetooth icon should
appear in the task tray (visible from the Today screen for Pocket PCs and
Pocket PC 2002s). Tap on the icon.
2. In the pop-up menu, select Turn Transmitter OFF.
3. The Bluetooth Card radio transmitter will shut off. The Bluetooth icon in
the task tray will become gray, as will relevant menu options
(e.g., Get Connected!).
4. To turn the radio transmitter back on, in the pop-up-menu, select
Turn Transmitter ON.