Sodex Sport S30429 User manual

DESCRIPTION
Galvanized steel structure
Powder coated
CONFORM
ASSEMBLY INSTRUCTIONS
VOLLEYBALL REFEREE STAND
PRODUCT REF :S30429 UNIT
ASSEMBLY TIME
The assembly estimated time of this product is 60 min, for 1 person.
MAINTENANCE
The equipment has to be regularly maintained by the owner. It is advised to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
It is advised to carry out this cleaning once or twice a year, or even more regularly according to the environmental
conditions (saline environment, …)
WARRANTY
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to be done
within the legal period of the reception of the material. The warranty will not apply to:
- all degradation during the transport.
- all degradation due to use differing from which was intended.
- all degradation due to poor maintenance.
- any defect claimed after the end of the legal period.
- any damaged due to a faulty installation and assembly of the module.

2
ASSEMBLY
NECESSARY
ITEMS
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
1- ASSEMBLY OF THE FRAME
Wrench 13mm
PVC swivel feet M10
+ Rubber protection
X4
PVC swivel feet
M10
X4
Rubber protection
X4
PVC swivel feet
M10
X4
Rubber protection
X16
Screws BC M8x20
X32
Washers BC 8
X16
Nuts BC M8
X4
Screws BC M8x60
X4
Washers 10
X4
Lock-nuts M10
Screws BC M8x20
+ washers BC 8
+ nuts BC M8
X12
Screws BC M8x20
X24
Washers BC 8
X12
Nut BC M8
X2
Wheel D125
X2
Hub
X3
Plate connectors
X1
Safety PVC strap
X3
Plate connectors

3
ASSEMBLY
2 – ASSEMBLY OF THE WHEELS (X2)
NECESSARY
ITEMS
Washers BC 10 +
lock nut BC M10
Washers BC 10 +
lock nut BC M10
NECESSARY
ITEMS
3 – ASSEMBLY OF THE PLATFORM SUPPORT FRAME
X2
Washers 10
X2
Lock-nuts M10
X4
Screws BC M8x20
X4
Washers BC 8
Screws BC M8x20
+ washers BC 8
X1
Wheel D125
X1
Hub
Hub

4
ASSEMBLY
4 – ASSEMBLY OF THE STANDING PLATFORM
NECESSARY
ITEMS
NECESSARY
ITEMS
5 – ASSEMBLY OF THE SAFETY PVC STRAP
Screws BC M8x60
+ washers BC 8
+ nuts BC M8
X4
Washers BC 8
X4
Nuts BC M8
X4
Screws BC M8x60
X1
Safety PVC strap

5
ASSEMBLY
NECESSARY
ITEMS
6 – ASSEMBLY OF THE PADDINGS (X2)

NOMENCLATURE
Package
N° Ref Index Designation Description Quantity Packing method Weight (kg)
Dim.
(mm)
A1
S30429-01 ALeft side frame +
right side frame
1 + 1
Plastic bubbles +
cardboard 5 layers 41 2460x1360x150
S30429-02 APlatform support frame 1
S30429-03 ALadder bars 3
S30429-04 AStanding platform 1
A2 S30429-05 APaddings 2Plastic bubbles +
cardboard 5 layers 81550x1400x250
PRE-ASSEMBLED ACCESSORIES
Package
N° Designation Description Qty Note
A1 Anti-slip band
0.6 m 3Fixed on the ladder bars
A1 PVC cap D34 with
nut M10 4Fixed on the feet of side frames
VISA PACKING DEPARTMENT DATE :
PACKING LIST
VOLLEYBALL REFEREE STAND
PRODUCT REF S30429 Index A UNIT

ACCESSORIES PUT IN CLEAR PVC BAG
Package
N° Designation Description Qty Note
A1
Screws BC M8x20
+ washers BC 8
+ nut BC M8
12 + 24 + 12 To assemble the
frames
A1
Screws BC M8x60 +
washers BC 8
+ nut BC M8
4 + 4 + 4 To fix the standing
platform
A1 Screws BC M8x20 +
washers BC 8 4 + 4 To fix the platform support
A1 PVC swivel feet
M10 4To be fixed below the front feet
A1 Rubber protection 4To be fixed below the
front feet
A1 Washers BC 10
+ locknut BC M10 4 + 4 To fix the wheels
A1 Hub 2To fix the wheels
A1 Wheel D125 2To be assembled on
the rear feet
A1 Plate connectors 3To be assembled to
the frame
A1 Safety PVC strap 1To ensure the safety
of the referee
VISA PACKING DEPARTMENT DATE :
PACKING LIST
VOLLEYBALL REFEREE STAND
PRODUCT REF S30429 Index A UNIT