Sodex Sport S14090GC Dimensions

DETAILS
SODEX INTERNATIONAL
18 rue de l’Avenir - Bât. 224
14650 CARPIQUET
Tel : + 33 (0) 2.31.53.78.70
Email: [email protected]
DESCRIPTION
Steel structure
Plastified
CONFORM
European standard
NF EN 1270
Decree
SPORT’S LAW 2007
PRODUCT SHEET
BASKETBALL 4 GOALS TOWER
PRODUCT REF :S14090GC UNIT
SPORT’S LAW 2007
According to the decree above, for the first installation the goal must be tested like below :
Put a vertical and static charge of 320 kg, at the jonction of the pannel and the basket , at 0.20m of the ground, du-
ring one minute.
During the first installation, this stability and solidity test is compulsory.
Every time that the equipment is assembled, a visual check of the stability and solidity must be realized.
The owner must regularly check the condition of the product.
MAINTENANCE
The equipement has to be regularly maintained by the owner. It is adviced to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufactu-
rer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
WARRANTY
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to
be done within the legal period of the reception of the material. The warranty will not apply to:
- all degradation during the transport.
- all degradation due to use differing from which was intended.
- all degradation due to poor maintenance.
- any defect claimed after the end of the legal period.
- any damaged due to a faulty installation and assembly of the module
THIS PRODUCT HAS BEEN BUILT AND DESIGNED ACCORDING TO THE FRENCH AND EUROPEAN STANDARD NF EN 1270

2
FIXATION AND SCELLING
ELEMENTS
NECESSAIRES
900 mm
4 Screws M18x40 + 4 Washers (non in-
cluded)
- Realize the sealing with concret CPJ45 do-
sed by 350 kg.
- Wait at least 72 hours to put the posts in the
sockets. (6 days during winter ).
- Assemble the main tube using the recom-
manded screws.

3
FIXATION AND SEALING
OPTION: ANCHOR KIT
900 mm
- Dig a hole for the sealing of the anchor
kit according to the dimensions written.
- Put the attachment plate in the hole.
Maintain it vertically and in the right posi-
tion by using bars.
- Fill the sealings with CPJ 45 concrete
dosed at 350 kg/m³ . Pour the concrete
around the attachment plate. Let the con-
crete set for a minimum of 72h..

4
Always drill the panel from the front side.
Drill a first hole with a bit of 6mm of diametre then do it again with a bit of
12mm of diametre. Start by drill the two holes on the top.
For outside using, it’s necessary to put some silicone around the hole to
protect them from water.
Put the panel on it support, check the height and then put a mark for the
drill of the last holes.
NECESSARY TOOLS (NOT INCLUDED)
Drill Silicone
DRILLING OF THE PANEL

5
MONTAGE
1– FIXATION OF THE SIDE BARS (x4)
NECESSARY
ITEMS
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
Wrench 17 Wrench 19
x4
Screws M12x40
x8
Washers M12
x32
Vis M12x40
x16
Vis M10x50
x32
Ecrous M12
x48
Rondelles M12
x40
Rondelles M10
x8
Screws M10x40
x24
Locknuts M10
Choose the wanted height (2m60 ou 3m05).
You can choose the height of the panel by changing the orientation of the bars.
Screws M12x40
Washers M12
ETAPE 2
Option 2m60 Option 3m05
ETAPE 1

6
ASSEMBLY
3– ASSEMBLY OF THE BASKETS AND PANELS (x4)
NECESSARY
ITEMS
2– ASSEMBLY OF THE ATTACHMENT PLATES (x4)
NECESSARY
ITEMS
For a better understanding half of
the screws have been removed.
ScrewsM12x40
Washers M12
Nuts M12
x4
Screws M12x40
x4
Nuts M12
x8
Washers M12
x4
Spacers
D13
x6
Screws M10x50
x12
Washers M10
x2
Screws M10x40
x6
Locknuts M10
Vis M10*50
Rondelles M10
Ecrous M10
Screws M10x40
Washers M10
Locknuts M10
Screws M10x50
Washers M10
Locknuts M10

7
ASSEMBLY
4– ASSEMBLY OPTION: HEIGHT CHOICE
NECESSARY
ITEMS
2.60 m
3.05 m
Change the side bar to modified the height of the panel.

NOMENCLATURE DES COLIS
Package
N° Ref Index Designation Description Quantity Packing Method Weight (kg) Dim. (mm)
A1 S14090GC-
01 AMain tube 1 Plastic
bubbles+cardboa
rd 5 layers
A2 S14090GC-
02 ASide bar 1 Plastic
bubbles+cardboa
rd 5 layers
A3 S14090GC-
02 ASide bar 1 Plastic
bubbles+cardboa
rd 5 layers
A4 S14090GC-
02 ASide bar 1 Plastic
bubbles+cardboa
rd 5 layers
A5 S14090GC-
02 ASide bar 1 Plastic
bubbles+cardboa
rd 5 layers
A6 S14520 APanel 1Plastic
bubbles+cardboa
rd 5 layers
A7 S14520 APanel 1Plastic
bubbles+cardboa
rd 5 layers
A8 S14520 APanel 1Plastic
bubbles+cardboa
rd 5 layers
A9 S14520 APanel 1Plastic
bubbles+cardboa
rd 5 layers
A10 S14333O
S14850 IBaskets + nets 2 + 2 Plastic
bubbles+cardboa
rd 5 layers
A11 S14333O
S14850 IBaskets + nets 2 + 2 Plastic
bubbles+cardboa
rd 5 layers
A12 S14090GC-
03 AMounting plate 4Plastic
bubbles+cardboa
rd 5 layers
A13 S14090GC-
09 AAccessories 1cardboard 5
layers
OPTION AGAINST LOCK
Package
N° Designation Description Qty Note
A14 Anchor kit 1Stick on the main
tube
PRE-ASSEMBLED ACCESSORIES
Package
N° Designation Description Qty Note
A2 Sticker Stick on the main
tube
ACCESSORIES PUT IN CLEAR PVC BAG
N° Colis Désignation Description Qté Remarque
A13 Screws M10x50 + washers M10 + lock-
nuts M10 16 + 32 + 16 Fix the panel and the
basket to the attach-
ment plate
A13 Screws M12x50 +
washers M12 + nuts
M12 32 + 48 + 16 Fix the side bars and
the attachment plate
A13 Screws M18x40 +
washers M18 + nuts 4 + 4 + 4 Fix the main tube
A13 Screws M10x40 + washers M10 + lock-
nuts M10 8 + 8 + 8 Fix the panel to the
attachment plate
VISA PACKING DEPARTMENT DATE :
PACKING LIST
BASKET 4 GOALS TOWER
PRODUCT REF S14090GC UNIT