Sodex Sport S40332 User manual

DESCRIPTION
Aluminium Structure
Powder coated
CONFORM
ASSEMBLY INSTRUCTIONS
LIFEGUARD CHAIR FOR
SWIMMING POOL
PRODUCT REF :S40332 UNIT
ASSEMBLY TIME
The assembly time for lifeguard chair is estimated at 50 minutes with 1 people.
MAINTENANCE
The equipement has to be regularly maintained by the owner. It is adviced to:
- Check every week that all the screws are correctly tightened.
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the
manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
WARRANTY
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has
to be done within the legal period of the reception of the material. The warranty will not apply to:
- All degradation during the transport.
- All degradation due to use differing from which was intended.
- All degradation due to poor maintenance.
- Any defect claimed after the end of the legal period.
- Any damaged due to a faulty installation and assembly of the module.

2
ASSEMBLY
NECESSARY
ITEMS
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
1- ASSEMBLY OF THE FEET TO THE HORIZONTAL FRAME AND TO THE SEAT SUPPORT
Wrench 17mm
Part-thread SS
screw M10x55
+ SS Washers 10
+ SS locknut M10
PVC swivel feet M10
+ Rubber protection
x4
PVC swivel feet
M10
x4
Rubber protection
x2
PVC swivel feet
M10
x2
Rubber protection
x2
SS Screws
M10x50
x22
SS Washers 10
x8
SS Locknut
M10
x8
SS Washers 10
x2
SS Locknut
M10
x6
Part-thread SS
screws M10x55
x6
Part-thread SS
screws M10x50
Part-thread SS
screws M10x50
+ SS Washers 10
x2
Part-thread SS
screws M10x55
x4
Part-thread SS
screws M10x50

3
ASSEMBLY
NECESSARY
ITEMS
2– ASSEMBLY OF THE LADDER
PVC swivel feet M10
+ Rubber protection
x2
PVC swivel feet
M10
x2
Rubber protection
x10
SS Washers 10
x4
SS Locknut
M10
x4
Part-thread SS
screws M10x55
x2
Part-thread SS
screws M10x50
Part-thread SS
screws M10x55
+ SS Washers 10
+ SS locknuts M10
Part-thread SS
screws M10x50
+ SS Washers 10

4
ASSEMBLY
3– SEAT FIXATION
NECESSARY
ITEMS
SS Screws M10x50 +
SS Washers 10 +
SS Lock nuts M10
x2
SS Srews
M10x50
x4
SS Washers 10
x2
SS Locknut
M10

NOMENCLATURE
Package
N° Ref Index Designation Description Quantity Packing method Weight (kg)
Dim.
(mm)
A1
S40332-01 BLadder 1
Plastic bubbles +
cardboard 5 layers 20 2020x560x210
S40332-02 BRear feet 2
S40332-03 BSeat support 1
S40332-04 BHorizontal frame 1
S40332-05 AArm rest 2
A2 S35402 ASeat 1Plastic bubble 2500x510x350
ACCESSORIES PUT IN CLEAR PVC BAG
Package
N° Ref Designation Description Qty Note
A1 BITI1050 +
LITA102220
Part-thread SS screws
M10x50 +
SS washers 10
6 + 6 To fix the horizontal
frame
A1
BITI1055 +
LITA102220 +
TITD10
Part-thread SS screws
M10x55 +
SS washers 10
+ SS locknuts M10
6 + 12 + 6 To fix the seat
support
A1
BITH1050 +
LITA102220 +
TITD10
SS screws M10x50
+ SS washers 10
+ SS locknuts M10
2 + 4 + 2 To fix the seat
A1 CV1060X PVC swivel feet M10 4To be fixed under the
feet
A1 NCCG Rubber protection 4To be fixed under the
feet
PRE-ASSEMBLED ACCESSORIES
Package
N° Ref Designation Description Qty Note
A1 S76640 Reinforced coat peg 2
Assembly the
reinforced coat peg to
the back frame
A1 NNHOM3060 Alu cap 30x60 4Assembly to the chair
A1 VTKF0325 Selt-tapping screws
M3.5x25 4
Assembly the
reinforced coat peg to
the back frame
A1 TRBR10 Rivet nut BC M10 6Fix to the cross frame
VISA PACKING DEPARTMENT DATE :
PACKING LIST
LIFEGUARD CHAIR FOR
SWIMMING POOL
PRODUCT REF S40332 Index B UNIT