Solar GreenTech 1200 User manual

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
Thank you for choosing our Solar Green Tech (SGT1200)
ATTENTION! It’s extremely important that you read and understand this user
manual before operation.
This solar generator is designed to work outdoors with IP65 all-weather rated
when the lid is correctly closed only. The generator outputs 240v domestic AC
electricity and if misused is capable of causing electric shock and even death.
If you are unsure or have any questions about using this generator then speak
to one of our technical staff who will be happy to explain how to use safely and
efficiently at Info@solargreentech.co.uk
The SGT 1200 (Solar GreenTech) is a safe and reliable source of outdoor
power and conforms to UKCA and CE standards.
It is absolutely necessary to ensure that the Solar Green Tech generator is
always in good condition with no sign of damage to the interior or external
parts of the unit including the solar panel. If there is signs of damage do not
use and contact us for further advice.
HOW IT WORKS:
Firstly the SGT 1200 produces zero emissions, zero noise, zero maintenance,
zero fuel bills, zero hassle.
The Unit works quite simply by harnessing the UV light from the sun via the
solar panel then fed into the units 12v internal battery. That battery power is
then converted using clever inverter technology in to 240v pure sine wave
equivalent to domestic supply
As long as the solar panel is facing in the general direction of the sun it will
always be charging through the day. The more sun the solar panel is exposed
to the quicker the generator will charge. The solar panel will still charge on a
cloudy day but at a slower rate.

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
The Solar GreenTech SGT 1200 Portable Power Station comes with 120W
6.6A folding weatherproof Solar Panel,
Fitted with a 100Ah 1280Wh LiFePO4 Battery with a 1200W/3000W pure sine
wave Inverter and solar controlled by a Victron MPPT solar charge controller.
The SGT 1200 unit control panel features
•2 x 240v AC sockets
•2 x 12v sockets
•2 x USB ports with battery status meter
•1 x LCD digital power consumption display
•1 x RCD for added protection against electric shock from earth fault
equipment.
•1 x Green illuminated power on button
•1 x Red power off button
•1 x Solar panel input charge socket
•1 x Fixed operating instruction panel
Rugged SGT1200 case features
•1 x IP65 water resistant body
•1 x Telescopic extendable pull along handle
•2 x Durable fixed roller travel wheels
•2 x Heavy duty carrying handles
•2 x lockable durable lid latches
•Rear dust and splash proof air vent
•1 x Inner lid foam insert
•4 x IP65 Cable out ports
•1 Continuous lid water resistant seal

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
SGT 120w folding Solar panel features
•1 x Black water resistant canvas folding carrier case
•4 x Linked water resistant monocrystalline solar panels
•2 x Wide durable adjustable rear leg stands
•10 x jack plug adapters accessories
•1 x conversion adapter lead accessories
•1 x 2.5m DC5521 power cable to generator
•2 x power outlets a USB QC 3.0 and USB CP D 45W
•24% High conversion efficiency technology
•120w 6.6A power output
Victron Blue Solar Charge Controller built in
•1 x MPPT 145W 10A control system
•Focusing tracking technology
•Peak efficiency 98%
•Intelligent battery management system
•Internal temperature sensor
•Fully discharged battery recovery system
Internal deep cycle Lithium Ion Battery features
•1 x 12v LiFePO4 100Ah 1280Wh
•1 x BMS (battery management system)
•Using the technology of lithium iron phosphate cell, superior safety
•Operating temperature between -20˚to 60˚
•Internal cell balancing
•Low voltage cut off
•Automatic over, under charge and temperature control

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
Internal 240v power inverter and SGT control system features
•1 x 240v 1200w/3000w dc to ac inverter
•1 x intelligent start/stop control systems
•1 x TN-S RCD set up
•2 x failsafe fault detect system
•Overheat and overload cut out protection
•Additional overheat cut out sensor
•Short circuit and over current protection.
•Battery to invertor automatic physical disconnect/reconnection system
•Operation temperature range 0˚to 50˚
The SGT1200 generator is ideal for uses ranging from the leisure industry to
the workplace with all options of 240v power outlets, 12v power outlets and
USB ports.
It’s ideal for when you are on a boat, in a camper van or caravan where there
is no alternative electrical hook up or when camping in a tent on a camp site.
It’s common for camp sites and parks not to allow you to run an engine to
supply power after 6:00 PM in the evening, making this a great solution for
silent power.
Our SGT1200 Generator will run without making a noise or causing any
pollution as it generates 100% green silent energy via smart solar charging
system.
It can be used during the day whilst charging and a night when it’s not
charging. All the energy from the daylight is cleverly collected, stored and can
be used anytime.
The generator can be used on building sites working when an environment
that does not allow noise pollution or has no alternative 240v power supply.
It can comfortably take a step down 240v to 110v yellow site transformer to run
on site equipment in areas when running a petrol generator is forbidden use.

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
It’s also a great alternative to running long extension cables from the house to
the garden should you want t power a lawn strimmer, hedge trimmer, lawn
mower etc.
If your hoisting garden parties it works great on music sound systems, Garden
lights to bouncy castles and much more.
No more noisy pollution or fuel bills by running petrol/diesel generators. The
SGT 1200 Generator charges completely from the sunlight producing zero
noise, zero pollution, zero fuel bills and zero maintenance.
You can use the SGT1200 day and night and is designed for indoor and
outdoor use but to charge the battery the solar panel requires to be facing
towards the direction of the sun at all times for maximum efficiency, so it is
highly recommended that the solar panel always remains outside to take full
advantage of the UV sunlight.
Like any generator whether solar powered or petrol it is always important to
never handle the 240v equipment plug and socket during the rain, damp
weather or if the control panel has become wet as there would be a high risk of
electric shock and possible permanent damage to the unit.
However the unit is IP65 weatherproof rated when the lid is closed and locked
correctly and with the cables correctly laid in the cable gates- please refer to
fig 1.
Again always ensure before use that the solar panel including cables are in
good condition and free from any damage. If you do find any damage STOP
using immediately and contact our technical department for help and advice.
For further advice on using outdoors in bad weather see fig 12 Fig 11 and Fig
14. Within this user guide
Fig 1
Cable Gates

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
Please ensure that you familiarise yourself with the controls and sockets on
the main control panel as it's important to understand what all the functions are
Fig 2 Fig 3 Fig 4
Fig 5 Fig 6
Fig 7 Fig 8 Fig 9

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
Main control panel control sockets, display’s and buttons
Fig 2: Main 240V power supply button, to turn on pressed for 1 second the
green button will illuminate the LCD consumption meter will illuminate and
display information. This should only be used when 240v is required to save
battery power.
Fig 3: Main 240v power supply off button, press this button for one second and
this will shut down the 240v supply. Ensure the green button no longer
illuminates and the LCD consumption meter switches off.
Fig 4: this is the solar DC input Jack socket from the solar panel. Following the
correct procedure for plugging in the solar panel to the DC socket refer to Fig
12 for solar panel instructions.
Fig 5: 12v Outlet sockets powered continually directly from the battery without
the need to switch on the main unit via the green on switch. Note any
appliance plugged into it will be directly and immediately powered.
Fig 6: 240v Outlet sockets deliver 240 volts of pure sine wave electricity. Note
this is the similar supply to the home supply and therefore is extremely
dangerous if mishandled can cause electric shock and in some cases even
death. Please ensure all appliances to be plugged in are in good working order
with no signs of damage to the device, plug or cables. Do not plug appliances
in before powering up the main unit (via the green on button) this may cause
damage to both the unit or your appliances. Once the unit is powered up then
attach the plug it to this 240v socket that is now giving 240v.
Fig 7: USB port have 2 x 5v Q C 3.0, outlets these will illuminate blue along
with the battery voltage displayed in the middle when the power button is
switched on the 12v Internal battery meter! It is important to understand how
much voltage your battery has, this will determine how much and how long you
have power within your unit. The battery is considered flat and requiring
recharge at around 10.7v and fully charged between 13.7v and 14.4v.
See fig 17: within the manual on battery voltage and percentage.
Fig 8: RCD is a device that can detect a fault between the earth and live
terminals that will cause the unit to trip out should it detect this fault. when the

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
switch is in the up position the switch is on, you can test this switch with the
test button which will trip will the switch down disconnecting the 240v supply to
the sockets. Simply reset by pressing the switch back to the top position.
should a fault occur the switch trip out. If the switch does trip out due to a
faulty appliance its very important that you disconnect the faulty appliance
before reinstating the switch to the up/on position. for further information on
the regulations around earthing for mobile generators please see the extract
Earthing conforms to the IET on-Site Guide BS 7671 :2018 Extract 2.4.1
Portable generator isolated from earth printed at the back of this booklet.
Fig 9: The LCD power consumption meter when illuminated will give
information such as the 240v being supplied to the 3 pin outlet sockets, the
amount of current and wattage your appliance is using. This will help ensure
you do not overload the units capabilities.
Fig 10: The folding solar panel. Ensure that you only handle the DC output
lead while the solar panel is folded, as soon as the panel is exposed to any
form of light the panel begins to generate power, the lead becomes live and
can generate 22v offload, we recommend that you plug the panel lead into the
unit first and then open the panel before placing the panel facing towards the
sun. See soler panel user manual.
Fig 11: The cable gates. It's extremely important that when the lid is closed
before use in a wet environment that the cables sit directly in the centre of the
cable gate foam. Please take extreme care to ensure this is done correctly as
this can ensure the IP65 rating for weatherproof use, failure to do so may allow
water to access the unit therefore not provide an IP65 weatherproof rating.
Fig 12 Fig 13: and Fig 14: These illustrate the positions in which the unit
should be operated in. Fig 12 demonstrates the unit lid must be closed when
operating in this position. Fig 13 illustrates the position the unit can be
operated on dry conditions only. Fig 14 illustrates the position the unit must be
operated in under wet conditions. It is extremely important that you follow
these instructions to ensure the unit remains IP65 water resistant.

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
Fig 15: The Air vent. The air vent is situated at the back underside of the unit's
main body this has been designed and placed specifically to ensure the unit
can breathe and the internal fans that keep the unit cool by circulating cool air
when needed, it is important that water is not allowed to enter this area. To
operate the unit correctly to prevent this from happening you must follow the
instructions as laid out in Fig 11:, Fig 12: and Fig 14: The fans only come on
when the unit becomes hot inside. Should you hear the fans running this is
perfectly normal but for faster cooling times, if convenient ensure the lid is
firmly closed and stand the unit up right to help increase Max air flow if needed
see Fig 12.
Fig 16: The telescopic extendable pull along handle. The unit is approximately
22 kilogrammes a useful feature works with cases fixed wheels and like a
suitcase the extendable handle will enable you to pull the unit along behind
you whilst transporting it between users. It is important not to use this handle
to lift the unit off the ground as the handle is only designed to pull the unit
along it is not designed to be strong enough to take the entire weight of the
unit and doing so could cause damage to the handle.
The sturdy handle on the front and the top are design for carrying the case as
they were heavy duty and can easily handle the 22 kilogrammes the unit
weighs
For further information and understanding of the features and functions or
anything you are unsure of please don't hesitate visit at
www.solargreentech.co.uk or email us at info@solargreentech.co.uk
WHAT CAN BE POWERED BY THE SGT 1200
The unit has a total of 6 power outlets 2 x 240v sockets 2 x USB ports and 2 x
12v sockets. In order to use the 240V you need to switch on the main unit by
pressing the green power button until it illuminates.
If you wish to just use the 12v sockets only you do not need to power on the
main 240v unit supply as the 12 Volt sockets are continually supplied. When
using only the 12 volts the battery is able to run down to about 10.7v before

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
requiring a recharge however if the 240v the unit is powered up this may
shutdown when the battery voltage is around 11.1 V See Fig 17: for battery
chart.
If you wish to use the USB ports quite simply press the USB power button
USB ports illuminate blue.
The 12 Volt internal a lithium ion battery has a capacity of 100Ah and 1280Wh
and will power the unit for a time dependent on what appliance you use and for
how long please see below an example the equipment you should or should
not use.
Run time and charge time.
Run time can vary depending on how you use the power and what you plug in
so here are some examples from a full charge without the solar panel fitted.
Using the sockets
•1 x 12v socket only on a good quality camping fridge will run for
approximately 85 hours between charges
•2 x 12v socket only on 2 good quality camping fridge will run for
approximately 42 hours between charges
•1 x 240v socket only on a good quality camping fridge will run for
approximately 58 hours between charges
•2 x 240v socket only on a good quality camping fridge will run for
approximately 27 hours between charges
•1 x 240v socket only on a 42 inch TV will run for approximately 8 hours
between charges
•2 x 240v socket only on a 42 inch TV’s will run for approximately 4
hours between charges
•1 x USB socket only on a Ipad will run for approximately 460 hours
between charges
•2 x USB sockets only on 2 Ipad’s will run for approximately 243 hours
between charges
On a full charge you will have between 13.8v and 14.4v charge giving 1280Wh
available from the internal 12v battery, whenever the invertor is turned on the
using the main On green button the invertor users approximately 8w from the
battery so its worth remembering when working out run time and capacity to
factor in the inverter’s own consumption.

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
Battery information showing voltage to percentage ratio chart including safe
operation and care please Fig 17: and Fig 18:
Example
When running camping fridge that is normally 45w the fridge will only peak at
45w in normal conditions for approximately 20 minutes of every hour and the
remainder of the time the fridge will be on standby at around about 7w. This
means the total amount of wattage per hour on a 45w fridge is calculated
divide 45w by 3 equals 15w per hour.
If you run the above fridge for 1 hour from the 12v supply only you will use 15w
per hour.
Divide 15w by the 1280wh battery capacity and you will get approximately 85
hours run time from the battery
If you run the same fridge from the 240v invertor supply you will use 15w for
the fridge and 8w from the inverter totalling 23w
Divide 23w by the 1280 battery capacity and you will get approximately 56
hours from the same battery and fridge.
It is therefore advised if you have the two options available to run your fridge
which is normally the case with camping equipment we would recommend that
you used the 12V socket and leave the inverter turned off to give longevity
between charges. However you also enjoy the luxury of being able to run 240v
appliances where 12 Volt input is not possible. For example running
appliances such as power tools, lawn mowers, grass strimmer’s, lap top
charges, hair dryers, hair straighteners and much more items that you would
use for shorter periods of time that needed more power.

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
A list of recommended example items that can be used on the 240V sockets
The SGT1200 Generator has an output capacity of continuous1200w 240v
output with a peak output for surge start-up of 3000w
This is an example of appliances that can be used safely and are considered
none continues
•600w hair dryer running stop start for up to 60 minutes.
•100 W hair straighteners running for 60 minutes.
•250w to 850w power tools Running stop start for up to 6 hours.
•lawn mowers and hedge trimmers running for up to two hours.
•Coffee machines that run for 5 or 6 minutes low what
•650w camping kettles running for 10 minutes.
•
This is an example of appliances that can be used safely and are considered
continuous running
•45w Camping fridge can safely run from 12v up to 85 hours
continuously
•240v 40w work light can run for up to 58 hours continuously
•240v to 110v Step down transformer running a 40w light will run for 30
hours continuously
•240 Volt 42 Inch television will run continuous for 8 hours continuously
•Table and stand lamps of approximately 20 amps would run for
approximately 80 hours continuously
•Tablets and smart phones plugged into USB will run for 400+ hours
continuously
•350w Bouncy castles can run between 3 and 3.5 hours continuously
•Garden entertainment systems can run for up to 40 hours continuously

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
This Is an example of appliances that should not be used or user for prolonged
time and what other companies are not disclosing to you.
•1200w Microwaves for more than 5 to 7 minutes as these run at high
amperage.
•900w to 1200w High amp electric fan heaters as the high amperage
and dramatically drain the battery and shut down the invertor safely.
•Vacuum cleaners for example a 1200w vacuum cleaner will draw
1200w whilst there is no suction pressure but when the vacuum
cleaner hits a surface where you hear it change tone is generally when
the power draw is increased greatly from 1200w to 1600w which could
cause the inverter to safely cut out and may not restart for up to five
minutes afterwards.
•1200 Watt chop saw cutting through wood, while the saw is spinning
freely it will run perfectly fine at 1200w but when put under intense
pressure for example struggling through wet wood would push the
1200w to as much as 2400w which could cause the inverter to safely
cut out and may not restart for up to five minutes afterwards.
•We do not recommend that you use cheap cool boxes that
continuously run without thermostat control as this unnecessary drags
the battery down as they are extremely inefficient.
•when use in small panel heaters ensure they have a thermostat cut
out control as these can unnecessarily drain the battery
•Warning Do not Place, store or leave the battery exposed in direct
sunlight, Close the lid or place in a shaded and cool area. Allowing the
battery to overheat is potentially dangerous and can cause permanent
damage and void the warranty.
Never attempt to jump start a vehicle directly from the 12V output this will
cause the battery management to shut the battery down safely and a
battery restart will be required by plugging in the charge supply I.e. the
solar panel.
Only use the supplied solar panel for this unit and never try to attach more
that 1 solar panel at a time.
.See solar Panel instructions for full user details.

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
When operating the units 240v sockets this falls under the ITE on site guide for
portable generators. Please see below instructions regarding earthing and
type 1 and type 2 equipment types that should be used in conjunction of the
regulations.
Earthing conforms to the IET on-Site Guide BS 7671 :2018
Extract 2.4.1 Portable generator isolated from earth
551.4.4
Portable generators ranging in output from 0.2 kVA to 10 kVA single-phase are often
isolated from Earth, i.e. there is no connection between the chassis and/or earth
connection of socket-outlets) of the unit and the neutral of the generator winding and
Earth. The ends of the generator winding are brought out to one or more three-pin
socket-outlets which should conform to BS EN 60309-2. The earth socket-tube of the
socket-outlet (s) is usually connected internally to the frame of the generator only; see
Figure 2.4.1.
413 This arrangement is a form of electrical separation, where basic protection is provided
418.3
by basic insulation of live parts or by barriers and enclosures, and fault protection is
provided by simple separation of the separated circuit from other circuits and from Earth.
The requirements for electrical separation can be found in Section 413 of BS 7671
where one item of equipment is supplied and Regulation 418.3 where more than one
item of equipment is supplied by the separated circuit. However, the requirements of
Regulation 418.3 could prove difficult or impracticable to meet in a typical application of
a portable generator.
It is extremely important to note that a portable generator isolated from earth should
➢only be used to supply equipment in the following permutations:
➢one or more items of Class Il equipment
➢one item of Class I equipment
one or more items of Class Il and one item of Class I equipment.
The supply of only Class Il equipment, however, is preferable.
No more than one item of Class I equipment should be supplied at any time as faults can
be presented as voltages and operatives can provide a path for current flowing between
exposed-conductive-parts of faulty equipment.

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
General safety and good practise
Like all things in life there is limits to what can be done and this is no different
with the solar green tech 1200. The units 240v pure sine wave output is
capable of delivering 240v up to 1200 watts and approximately 5 amps.
Do not try to overload the unit with appliances that are too powerful. this will
cause the unit to trip out and continually trying to overload the unit or you may
cause irreversible damage that will not be covered under warranty.
If the unit has shut down due to overload or overheat it will be required to self-
cool The unit under normal operating conditions will always switch on in under
3 seconds. Do not try to force the unit to start if it has shut itself down by
pressing and holding the green power on button for more than 3 seconds as
this could also cause irreversible damage that would result in your warranty
being void.
It is also extremely important that you do not operate this unit with the lid open
when it is raining. If any of the internal components or the Control panel
become wet do not switch the unit on. It is important for the safety of the user
and the components inside that the unit remains dry at all times even if you
suspect that it may have become wet inside do not use this unit.
If the unit does become wet leave in dry environment with the lid open in the
operational position but do not switch on, contact us and ask for technical
advice on how to rectify this problem as each situation may be different.
You should only ever use the number of sockets that have been provided if
you wish to run an extension cable ensure that you still only have two outlets
for the 240v, the 12v and the USB. Overloading the sockets can cause
irreversible damage and will result in your warranty becoming a void.
Do not store or carry the unit upside down as the internal battery is heavy and
could become dislodged Also do not drop from any height and if the unit has
been dropped carry out a thorough investigation of the external box and
internal control panel and battery. If any damage has occurred you must not
use the unit and contact us for technical advice.

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
Battery information showing voltage to percentage ratio chart and battery
safety
Fig 17:
14.4v
100%
Fully charged
13.5v
75%
Very healthy
12.6v
50%
Good
11.7v
25%
Running low
10.7v
0%
Recharge
(Battery voltage status display)
It’s worth remembering that when the battery is under load for example when
you are powering an appliance that the battery voltage will drop. This is normal
with all batteries including the Lithium ion battery fitted in this unit..
However this voltage reading is not the true representative voltage level. The
true voltage will show when the unit is not powering any appliances. For true
accurate voltage reading wait a minute after powering down all appliances and
read the voltage again.
This is the Lithium ion battery so it is very important that it is looked after and
nothing placed on to it. If this shows any sign of damage you must stop using
the unit immediately and contact us for further advice in how to proceed or
return for repair.
Fig 18:
Lithium ion battery
Warning Do not Place, store or leave the battery exposed in direct sunlight,
Close the lid or place in a shaded and cool area. Allowing the battery to
overheat is potentially dangerous and can cause permanent damage and void
the warranty.

For more information please visit www.solargreentech.co.uk ©copyright 2022
Continue to next page.
Solar GreenTech 1200 User Guide
Disclaimer
Warning Do not Place, store or leave the battery exposed in direct sunlight,
Close the lid or place in a shaded and cool area. Allowing the battery to
overheat is potentially dangerous and can cause permanent damage and void
the warranty.
Selling on or loaning out this SGT1200 unit
If you loan out or sell this generator you must supply the new user/owner a
copy of this user Manual you are responsible for passing on the information to
ensure the unit continues to be operated safely and in accordance with these
instructions to prevent the likelihood of anyone becoming injured as a result of
a lack of understanding of the operating procedures.
These operating instructions are extremely important so ensure your 2 year
guarantee is upheld and you can achieve longevity and enjoy the benefits that
the SGT can bring.
The units manufacturing here in the UK are very tightly controlled and
regulated and also marked with three unique serial numbers on tamperproof
tags. These serial numbers are registered on a database in order to ensure a
very high standard of quality control, should these seals or serial numbers be
tampered with the warranty will be void.
The unit has a nonreturnable lithium ion battery that starts its life cycles the
moment you purchased, switch on and as so cannot be return for a refund
once used (in the same way if you were to purchase a mobile phone, laptop,
washing machine etc) however any faults or problems with the item will be
rectified by the manufacturer in accordance with our warranty policy again it
must be stressed that the unit cannot be returned for a refund once used if the
unit remains unused you will have a statuary 28 days to request a refund.
Table of contents
Other Solar Inverter manuals
Popular Inverter manuals by other brands

GreenWorks
GreenWorks 9300000 owner's manual

Telair
Telair ENERGY 4010B User's operating instruction and installation manual

Champion Global Power Equipment
Champion Global Power Equipment 201122 quick start guide

Energizer
Energizer SOLAR Force Series user manual

ring
ring POWERSOURCEPURE RINVP600 instructions

tbs electronics
tbs electronics Powersine Combi PSC1600-12-60 owner's manual