SOLIS DLS Instruction manual

Data Logger Wifi Stick
Quick User Guide
DLS Version: 2.1
1 pc WiFi
1 pc WiFi external antenna
1 pc Data Logger Wifi Stick Quick User Guide
Delivery Content
Data Logger Wifi Stick is mainly used in inverters to realize
simple and quick access to Internet. Users can easily check
device information by logging in the monitoring center. The
communication topology is as shown below:
Wireless Router
Data Logger
Wifi Stick
iPhoneAndroid PC
Introduction
Description of Symbols
To ensure normal use of the datalogger, before using the
datalogger, be sure that:
a. The connected wireless router can normally access to
Internet;
b. The communication address of the inverter MUST BE
“ ", which is default value.
c. A WiFi-enabled mobile phone is connected to this device
for parameter setting.
01
Data Logger Wifi Stick Interface
2
1
1Electrical Connection
Connect WiFi to the corresponding interface on the inverter.
Solis-1P5K-4G is used as an example in this manual.
Please perform relevant operations as indicated below:
Corresponding groove
Data Logger WiFi Stick Installation
1. Insert WiFi Stick to COM port.
2. Fasten the WiFi Stick.
NOTES
The datalogger must be kept away from large metal
objects and electrical devices with strong magnetic fields,
such as microwave oven, refrigerator, cordless phone,
concrete wall, PV panel and metal wall, to ensure the
communication quality. Communication quality may
be affected in lightning storms.

Create Solis Monitoring Account
2
Ginlong Home
For End User
Ginlong Pro
For Distributer/Installer
Step 1: Mobile phone scan the QR code to download the
APP, or in the APP Store or Google Play search Ginlong
Home or Ginlong Pro.
Step 2: Click on the “ ”.Register
Step 3: Fill in the form as required and click the“ ”.Register
Register
Register
Create Plant
3
Step 1 In the APP homepage and click “
” in the middle of the screen. Or
click the “ ” in the upper right corner.
: Build Your
Plant Within 1 Minute!
+
Build Your Plant Within 1 Minute!
+
Step 2: Enter the SN of the datalogger.
The datalogger SN can be automatically scanned by
placing the purchased device bar code in the scan box. If
you can't scan, you can also manually enter the
datalogger SN (just enter the digital serial number).
Note: Please scan the SN number on the datalogger, not
the SN number on the inverter.
√×

Step 3 Enter the plant information.Then click the .: “ ”Next
Step 4 Enter the plant name and contact information of
the plant owner. Then click the “ ”.
:
Done
Next
Ningbo Ginlong Technologies Co.,Ltd.
Connect
Step 1 Click the on the Device interface.: “ ”Connect
4Configure WiFi
Next
Step 2 Make sure phone connected to yourself router
WiFi network. Then click the .
:
“ ”Next
Step 3: Enter WiFi Password and click the “ ”.Ensure
Ensure
Tip: if you cannot connect to WiFi, try the
following.
If the signal strength of the selected network is
<15%, the connection is unstable, please adjust
the router's antenna position or increase the relay.
The router's SSID and password do not use!@ # $%
& *,.;'() ""? and other special characters.
Some enterprises may limit the WiFi connection, so
it is recommended closing limit function of the Qos.
Support the normal routing encryption (WEP/WPAPSK
WPA2PSK), does not support mixed multiple encryption
methods.
Open the router's DHCP function, otherwise unable
to connect to router wifi.

Step 5: Wait 1-3 minutes, until the configuration is successful.
Step 4: Switch to the WLAN interface, connect your phone
to “ ”, and switch to the APP interface.AP_XXXXXXXXX
Step 6: Plant registration finished.
Tip: If configuration failure, there may be the
following reasons:
If the signal strength of the selected network is less
than 15%, the connection is unstable. Please adjust
the position of the router's antenna or increase the
relay.
Connect to other network accounts with Wifi, but
not this time.
The serial number cannot be scanned, and it is
wrong to input the serial number manually.
5G WiFi is not supported.
Distrubutor / Installer Create Plant
5
In order to easy registration and easy manage, you can
also let the distributor/installer register the plant, then Link
it to you.
Click the [ ] and tell the “ ” to your Distrubutor/installer
to build the plant for you.
(Note: your Distrubutor/installer must have a Ginlong Pro
account)
ID
Solis
After the successful connection to the WiFi router，
the AP signal from the Solis WiFi stick will be hidden in
case of any misoperation.
NOTES
6Link Distributor / Installer
Step 1: In order to easy manage to your plant.
Select the plant and enter . Click the " " or
" " .
Intro installer
distributor
Disconnected Installer
Disconnected Distributor

Step 2: Enter the company name of the installer or distributor.
Then click the “ ”.Search
Step 3: Click the [ ] and the plant
will appear in your installer/distributor monitoring interface.
(Note: your installer/distributor must have a Ginlong Pro
account to appear in the search list)
Bind Distributor/Installer
Bind Distributor
Search Distributor Name
Search
Contact
If you have any technical questions about our products,
please contact us.Before contacting us, please confirm
the following items:
Equipment model
Serial number of the datalogger
Problem description
Screenshot of the Status page in the configuration
interface
Ningbo Ginlong Technologies Co., Ltd.
No. 57 Jintong Road, Binhai Industrial Park,
Xiangshan, Ningbo, Zhejiang, 315712, P.R.China.
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.ginlong.com