©2016 All right reserved Solis Import Export Co.6
Operating PR-1:
1. Turn the device on by push the On/Off
button once. The device will beep once
and the power indicating green light will
be turned on.
2. Place the emitter tip at the opening of
nostril. Warning: Do not insert the
emitter tip deep into the nostril.
3. Press the Start/Stop button once to start
the therapy. The device will beep once
again indicating the therapy is started. At
this time, the mixed UV and red light will
be on. Do not remove the device to look
into the light emitter.
4. The therapy session will last 3 minutes.
5. When Therapy session ends, the device
will beep once and turn of the power
automatically.
6. During the therapy session, if one wishes to pause,
push the start/stop button once. The device will
beep 3 times and the power indicating light will
remain on.