3
Operang Instrucon
1 - AA Baeries Operang
1.1 - Remove the baery cover on the back of Mini Air Purier, install 4 “AA” 1.5V
high-quality alkaline baeries (not included).
1.2 - Press the buon, the unit runs with an automac cycle of 2 minutes ON / 10 minutes
OFF. During the ON period LED emits a connuous green color and during the OFF period it
blinks with green color.
1.3 - If you press the buon once again, the unit will restart and run with the cycle of
2 minutes ON and 10 minutes OFF.
1.4 - To turn o the Mini Air Purier press for 3 seconds. LED will blink twice with red color
which means that the unit is switched o.
1.5 - If LED emits (during the 2 minutes ON period) or blinks (during the 10 minutes OFF
period) with red color, it means the baeries are low and need to be changed, the unit sll
works under such condion, but not as well as with new baeries.
2 - USB Cable Operang
2.1 - Connect the adapter to the unit with USB cable, then plug the adapter into the mains
socket 100-240V AC, 50/60Hz.
2.2 - Press the buon, the Mini Air Purier will work connuous automacally (mode 1) and
LED emits a connuous blue color.
2.3 - Press the buon once again, the Mini Air Purier runs into an automac cycle 2 minutes
ON / 10 minutes OFF (mode 2). During the ON period LED emits a connuous green color
and during the OFF period it blinks with green color.
2.4 - If you press the buon once again, the Mini Air Purier goes into mode 1 again and
then press the buon again, it goes into mode 2. Use the buon to change from mode 1 to
mode 2 or back again.
2.5 - To turn o the Mini Air Purier press for 3 seconds. LED will blink twice with red color
which means that the unit is switched o.
3 - Aenon:
3.1 - When you change from external power to internal baery operaon, you need to
restart the Mini Air Purier by pressing the buon. Or the reverse.
3.2 - As soon as plugging-in adapter, external power supply way is priority over baery way.
3.3 - If you press the buon for 10 seconds, the unit will go into tesng mode with an
automac cycle of 5 seconds ON, 6 seconds OFF. In this case, please, switch o the unit and
switch it on again. The unit will go into normal mode.
3.4 - The baery operang mode only works when the power cable is removed from the
unit.
..EN
MAP-APSO01 - User Manual (EN)