Airgle AG600 User manual

®
Airgle®Room Air Purifier (Model: AG600)
Owner’s
Manual
Airgle® Clean Room Air Purifier (Model: AG900)

TABLE OF CONTENTS
Table of Contents.............................................................................................................. 2
Important Safety Precau�ons............................................................................................ 3
AG600/900 Air Purifier Systems ........................................................................................ 4
Unpacking and Assembly ................................................................................................ 4
Using the Air Purifier......................................................................................................... 6
Control Knob Sengs..........................................................................................................................6
Operaon Display................................................................................................................................7
Advanced Funcons ............................................................................................................................8
Using the Handheld Remote ............................................................................................................ 10
Airgle® Mobile Applica�on...............................................................................................11
Installing the App ............................................................................................................................. 11
Get Started with the App ................................................................................................................. 12
Adding an Airgle Device (AP Mode) ................................................................................................. 14
Control a Single Airgle® Device ........................................................................................................ 16
Controling Muple Airgle Devices................................................................................................... 18
Use the Automaon Features .......................................................................................................... 20
Limited Warranty.............................................................................................................24
Commercial Use ............................................................................................................................... 24
What is Not Covered by this Warranty ............................................................................................ 24
Service.............................................................................................................................25
Specifica�ons...................................................................................................................26
Page | 2 of 28

Page | 3 of 28
IMPORTANT SAFETY PRECAUTIONS
READ AND SAVE THESE INSTRUCTIONS
When using this or any electrical appliance basic safety precauons should always be followed
especially when children are present. These precauons include but are not limited to the
following:
The rated voltage specied on the data plate at the boom of the device must match the
local AC outlet voltage. If the rated voltaged on the data plate on the Airgle® Air
Puris 100-120V, it may only be plugged into a 100-120V AC outlet and if the rated
voltage specied on the data plate is 220-240V, into a 220-240V AC outlet.
Always turn oand unplug the Airgle® Air Puri when not in use.
Do not use the Airgle® Air Puri outdoors.
Do not expose to water or rain to reduce the risk of electric shock.
Do not immerse the Airgle® Air Purin water or splash water on it.
Do not operate the Airgle® Air Purinear an open ame.
Do not obstruct the air inlet or air outlet of the Airgle® Air Purier.
Do not let liquids or objects enter the air inlet or air outlet.
Do not plug in or unplug the machine when your hands are wet.
Do not unplug by pulling on the power cord, please be sure to grasp and pull the plug rather
than pulling on the power cord itself.
Do not run the cord under carpeng. Do not cover the cord with throw rugs, runners, or
similar coverings.
Do not route the cord under furniture or appliances. Arrange the cord away from trac areas
and where it will not be tripped over.
Do not use if the supplied power cord is damaged. Damaged cords must be replaced by the
manufacturer, its service agent or similarly qualid persons in order to avoid a hazard.
Disconnect the power supply from your Airgle® Air Purier by unplugging the power cable
before replacingters, cleaning, moving or doing maintenance.
Do not aempt to remove any part of the device except parts designated in this manual as
being replaceable, such as lters.
Do not use aachments or lters not recommended by Airgle.
Do not aempt to repair the Airgle® Air Purif your device is no longer working, contact
Airgle for informaon on where it may be sent for repair by an authorized service facility.
This product employs an overload protecon (fuse). A blown fuse indicates an overload or
short-circuit has occurred. If the fuse blows, unplug the product from the outlet. Replace the
fuse as per the user servicing instruons (follow product marking for proper fuse ng) and
check the product. If the replacement fuse blows, a short circuit may be present, and the
product should be discarded or returned to an authorized service facility for examinaon
and/or repair.
This appliance should not be used by children or persons with reduced physical, sensory or
mental capabil, or lack of experience and knowledge without supervision or inon
concerning use of the appliance and an understanding of the hazards involved.
When using in a child’s room, place where the child cannot reach the device. Children should
be supervised to ensure that they do not play with the device. Children should not clean or
perform user maintenance without supervision.
To reduce the risk of or electric shock, do not use this device with any solid-state speed
control device.
Sa
Skin or eye damage may result from directly viewing the light produced by the lamp in this
apparatus. Always disconnect power before relamping or servicing. Replace lamp with part
number AF600T or AF900T, manufactured by Airgle.
ve these instrucons for future reference.

by volume (ppmv) in a 24-h period. The Health Canada Guideline 2010 recommends that the

tested in a sealed, controlled room approximately 30 m.

AG600/900 AIR PURIFIER SYSTEMS
Medical Grade Air Filtra�on Technology for Microbes | Chemicals | Par�cles in Cri�cal Areas
The Airgle AG600/900 air puris are specically engineered for airborne infecon control.
Those who sur from severe allergies, asthma and cl respiratory problems will experience
deep carbon blend, and our next gon Titanium Pro® module. -
UNPACKING AND ASSEMBLY
1. Remove the Airgle®tem from the packaging.
2. Do not throw the original box and packaging away. Keep it in case you need to transport the
unit again someme in the future.
3. Check the components received against your packing slip to make sure you have all the parts.
4. Check the unit and all the components for damage. If the unit or any of the components
show damage from shipping, contact your local dealer.
.For your future convenience, record the model informon here. Model informaon can be
found on the name plate located on the boom of your unit.
Model Number:
Purchase Date：
QR Code:
AG600 INCLUDED AND PREINSTALLED COMPONENTS:
Page | 4 of 28
Main Housing
cHEPA Filter (Preinstalled)
Gas & Odor Filter (Preinstalled)
Rear Door (Preinstalled)
Titanium Pro®Module (Preinstalled)
Casters (Not Installed)
acute relief aer use. They feature a cHEPA lter with an ency of over 99.999%, premium

Page |
AG900 INCLUDED AND PREINSTALLED COMPONENTS:
INSTALLING THE INCLUDED CASTERS
1) 
Carefully insert the caster stem by pushing it straight down into receptor tube.
2) Press on the caster unis completely seated and aligns with the boom of the unit.
3) Insert the remaining casters in the same way. Ensure each caster is securely ed before
placing the machine in its upright posion onto the casters.
Main Housing
cHEPA Filter (Preinstalled)
Gas & Odor Filter (Preinstalled)
Rear Door (Preinstalled)
Titanium Pro®Module (Preinstalled)
Casters (Not Installed)
2
Align with the bottom
3
Insert Vertically
1


USING THE AIR PURIFIER
The Airgle® system is equipped with a state-of-the-art control panel. This advanced control panel
allows you to assess the unit’s status with one quick glance.
CONTROL KNOB SETTINGS
1. Timer: Press this buon to set the mer for up to 12 hours of connuous operaon. The me
shows on the boom right of the LCD display on the le-hand side of the panel.
Each press of the mer buon is 1 hour of med operon. For example.
Press Timer buon once and the LCD displays 01:00 indng that the puri will run
for 1 hour.
Press Timer buon twice and the LCD displays 02:00 indng that the puri will run
for 2 hours.
And so on up to 12 hours
2. Mode:
Auto Mode: Press the buon once to acvate the Auto speed funcon to allow for
automly seng the opmum speed needed for air purion of the room. During
auto operaon the Air Quality meter will change to the appropriate level of quality. This
mode uses the sensor on the side of the unit to determine the opmum speed based on
the amount of pars in the room.
Sleep Mode: Press the buon twice in succession and the unit will enter Sleep mode. LCD
backlight will turn oand change the fan speed to “1”.
In Sleep mode, the LCD Panel and UV Lamp can be turned on/oby doing the following:
oTo set the UV lamp On or Oress the Mode buon and hold down for seconds or
more.
oTo turn the LCD backlight On or Opress the Mode buon again to turn the LCD
backlight on.
3. Reset: Press this buon aer replacing any of theers or the Titanium Pro®. This will reset
any blinking lights and set the lter life to full. Note: This funon is only acvated when any
of thers require changing.
Page | 6 of 28
IR
1
2
3
4
5
Mode
AG600/AG900 Control Panel

Page | 7 of 28
4. Power/Speed: When the air  is turned o, the “Power O” indicator will display as
red, and the fan speed indicator will be o. To turn the system on, rotate the Power/Speed
knob counterclockwise or clockwise to select a speed from 1 to . The default speed for
starts from “1”. The light indicator for the selected speed will display as white and the speed
you selected will display on the le-hand side of the panel, while the “Power ” LED
indicator light is o To turn the system o, rotate the knob to the “Power ” posion. The
“Power O” LED indicator will display as red, and the light indicator for the fan speed will
turn o
.IR: This infrared receiver is used by your remote control to change unit sengs.
OPERATION DISPLAY
1. Air Quality: The Airgle® system is equipped with an advanced air quality monitoring sensor.
The Air Quality Gauge displays the quality of the air in the room – the air you breathe. The six
status bars indicate the quality from Unhealthy (one bar) to Good (six bars).
2. Filter Life: This monitor calculates the remaining life of the system’ters. The calcuon
takes into account both the already elapsed operaon me and fan speed. This allows for a
more accurate report onlter life. The six status bars indicate if the lter should be changed
(one bar) to when it is at its full life (six bars). When the lter needs aenon, the rst bar
will be blinking.
3. Control Seng: This advanced seng is for users who encounter challenging air polluon
environments and/or needs. The default seng is Moderate, which should be ideal for most
users. For more informaon, please see the Control Seng secon in this manual.
4. Light Bulb: This indicator displays if you have installed Titanium Pro®. If blinking, it indicates
that the Titanium Pro®Module needs to be replaced. For more informaon, please see the
Titanium Pro® secon in this manual.
Unhealthy Moderate Good
Replace Filter
66% Remaining
33% Remaining
Full Filter Life
4
7
5
6
1
2
3

.Speed: This indicates the speed selected by using the knob on the right-hand side of the
panel.
6. Auto: This indicates you have elected to use the Auto-Mode (it is on the right side of the
panel).
7. Timer: This indicates how much me is leunhe system shuts down (acvated by the
Timer buon on the right-hand side of the panel).
ADVANCED FUNCTIONS
TITANIUM PRO®MODULE
Your unit has been pre-installed with the Titanium Pro®module and the light bulb icon will
display on your control panel. The light bulb indicates whether your unit has the module
installed, and also indicates when it is me to replace the module by blinking. When that me is
up, the light bulb icon will start blinking. Aer you replace the lter and press the Reset buon
(on the right-hand side of the panel), it will stop blinking. If desired, the Titanium Pro® module
can be turned o
1. With the power turned on, press the Mode buon, hold down for more thanve seconds
and the light bulb indicator on the LCD display will start blinking.
2. When the light bulb is on, release the Mode buon to turn on the Titanium Pro® module.
3. When the light bulb is orelease the Mode buon to turn othe Titanium Pro® module.
CONTROL SETTING
The default seng for the unit is “Moderate” and will be displayed as four bars on the control
panel. This seng should meet air puriaon needs in most environments.
1. When you use Models AG600/AG900, make sure the units are powered on (plug in the units
and conrm the knob is at the “Speed 1 to ” posion).
2. Press and hold the Timer buon for more thanve seconds and you will hear a “ding” sound.
The Control Seng bars will cycle through High, Moderate, Low, Moderate......and then start
blinking.
3. If you release the Timer buon when “High” is blinking, the system is set to High Mode.
Answer the following questions to assess whether you need to change your control setting:
Yes
No
Are you nong severe indoor air polluon problems?
Are you or a member of your family having severe asthma and/or allergy issues?
Do you want to be able to always set your system to Auto mode?
Auto Mode: Your system will start on high to purify the air unt senses an extremely low
concentraon ofles, and then will automacally change itself to the low seng.
Yes
No
If you answered “Yes” to any of the queons above, you may want to consider
changing your seng to “High”.
If you answered “No” consider the following queson:
Do you have a relatively clean environment and purchased the unit for general air
purification reasons?
If you answered “Yes” to this queson, you may want to consider changing your seng to “Low”.
Page | 8 of 28

Page | 9 of 28
WHAT HAPPENS IN HIGH MODE?
When the unit is set on High, the sensor (on the side of the unit) is more sve to the
environment. The system will auto-acvate when it detects small amounts of pa the air.
Since it is more responsive to these small amounts of pit will acvate frequently, and this
will shorten the life of the lter. However, the air will be more pure in your room.
WHAT HAPPENS IN LOW MODE?
When the unit is set on Low, the sensor (on the side of the unit) is less sensive to the
environment. The system does not auto-acvate un it senses a medium to high amount of
p the air. This seng extends the lter life.

USING THE HANDHELD REMOTE
1. Power: Switch the system on/o.
2. Mode: Change the mode to Auto or
Sleep. Press the Mode buon and hold
e seconds. You can turn on/ohe UV
lamp.
3. Speed: Regulate fan speed from 1 to .
4. Timer: Set Timer from 1 to 12 hours.
The infrared receiver of the Airgle® system is located in the right- hand boom corner of the
control panel. In order to get the best signal transmission, the remote control should be pointed
at the control panel when pressing any buon on the remote.
Note: If there are barriers between the remote and the machine, the receiver may not be able to
receive the signal. The remote control is pre-loaded with a baery. Please remove the insulaon
lm on theery before use.
HANDHELD REMOTE BATTERY REPLACEMENT
1. Open the baery compartment by
pressing the small lever to the side and
slide the baery compartment out.
2. Remove the usedery.
3. Insert the new baery (3V baery
CR2032). Be sure that the (+) and (-) are
in the correct posion.
HANDHELD REMOTE MAINTENANCE
Replace the baery if it cannot get a signal.
4. Be sure the same model baery is
replaced.
. Always put the used baery in a bag
before disposal.
6. Keep the baery away from children.
Page | 10 of 28
1
2
3
4
!
This Product contains a lithium button/coin cell battery. If a new or used lithium
button/coin cell battery is swallowed or enters the body, it can cause severe intemal
bums and can lead to death in as little as 2 hours. Always completely secure the battery
compartment. If the battery compartment does not close securely, stop using the
product, remove the batteries, and keep it away from children. If you think batteries
might have been swallowed or placed inside any part of the body, seek immediate
medical attention.
The cells shall be disposed of properly, including keeping them away from children.
Even used cells may cause injury.

Page | 11 of 28
AIRGLE® MOBILE APPLICATION
The Airgle® AG600 Room Air Puriand AG900 Clean Room Air Puriave a mobile
applion with the ability to manage your Airgle® air puriom your own mobile device. It
can be downloaded on both iOS and Android plaorms.
INSTALLING THE APP
APPLE®iOSDEVICES
a. Launch the Apple app store on your device and in the search bar, enter "Airgle" and click
Search (a). Use the "Get" buon to download the app.
b. Once the app is installed, launch the app and click the "Register" buon to set up your Airgle
account (b).
c. Read the Privacy Policy and click "Agree"(c).
d. Enter your email address or phone number to obtain a vericaon code(d).
e. You will be sent a 6-digit verion code(e). Enter this code into the app to conrm your
registraon.

Android devices
a. Launch the Google Play store on your device and in the search bar, enter "Airgle" and click
Search. Use the "Install" buon to download the app(a).
b. Once the app is installed, launch the app and click the "Register" buon to set up your Airgle
account(b).
c. Read the Privacy Policy and click "Agree"(c).
d. Enter your email address or phone number to obtain a vericaon code.
e. You will be sent a 6-digit verion code. Enter this code into the app to conrm your
registraon.
GET STARTED WITH THE APP
a. Once fully signed into the app (a), click on the "Device Locaon Management" buon (1) to
create a locaon to control your Airgle devices.
b. Give your device locaon a name and set your physical locaon(b) to get real me weather and
air quality data (c). You can also choose which rooms in your locaon you want to place an Airgle
device.
c. Now you are ready to add devices to your locaon.
Page | 12 of 28

Page | 13 of 28
ADD THE AIRGLE®DEVICE TO YOUR APP
a. The "My Device" home screen (1) should now have your Airgle network name in the upper
 corner and should show the outdoor weather condons under the network name.
Underneath the weather informon, is a list of all the devices in the network. To add a
device to the network, click the "Add Device" buon (a) or the "+" buon in the upper right
corner.
b. On the Add Device screen, click on the "Air Puriimage (b).
c. Power on your Airgle® and follow the instrucons on the app to connect the device to WiFi.
This can be done by pressing and holding the "Reset" buon on the control panel for more
than seconds. Your device is ready to pair indicated by blinking WiFi icon on the device's
control panel (c).
d. Enter the WiFi password of your network to connect your Airgle® to your network(d).

ADDING AN AIRGILE DEVICE (AP MODE)
e. Add your device to advanced seng (AP Mode) (a).
1. The default networking mode is "EZ Mode".
2. If you have dit router and seng, you will need to connect via AP Mode by click the
"Net Pairing Mode"(1) at the upper right corner of "EZ mode" homepage to switch the
networking mode (2).
3. Set the product's networking mode to correspond to the app.
f. The factory default seng is “EZ Mode”. You may switch to “AP Mode” within 60
secondser unit is powered on.
g. To switch between the modes, press "Reset" buon and hold for seconds, release the
buon aer hearing the "ding ding" sound, WIFI indicator will brink on LCD.
1\EZ Mode: The WIFI indicator on the LCD display blinks at a fast pace (2 blinks per 1
second);
2\AP Mode: The WIFI indicator on the LCD display blinks at a slow pace (2 blink every 3
seconds);
h. Connect the product in the AP mode.
Page | 14 of 28

Page |
Use your mobile APP to connect the mobile phone WIFI to the product hotspot. The product
hotspot WIFI name should be "SmartLIFE-XXXX". The selected network then prompts to
connue adding products.

CONTROL A SINGLE AIRGLE® DEVICE
Now that your Airgle® AG600/900 device is connected to your mobile app, you can control the air
puriemotely from your phone.
a. Start by clicking on your device name(a). You can then control your device using the
buons on the Control tab (b).
1. Power on/othe device (1)
2. Switch between the operang modes (Manual, Automeep) (2)
3. Change the fan speed (1, 2, 3, 4, - Turbo) (3)
4. Turn on/othe Titanium Pro® UV module (4)
.Put your device on a schedule by using the Cloud Timing feature ()
6. Enable/disable the Child Lock safety feature (6). This disables all buons on the control panel
of your Airgle® Air Puri
b. You can also view air quality data andlter life status on the Data tab (c).
7. This chart indicates the current air quality level surrounding your Airgle® air purier (7).
8. This chart indicates the life of the cHEPA/carbonter (8).
9. This chart indicates the life of the Titanium Pro® UV module (9).
10. On the Control page (d), use the "Cloud Timing" feature to put your device or group of
devices on a schedule.
a. Select "Cloud Timing" to open the ming control interface (1).
b. View any exig schedules or create a new one by clicking "Add Schedule" (2).
c. Select a me to turn on your air puri
d. Select "Repeat" to set the day to be repeated in a week (3).
e. Select "Power" and select the acon to be performed "ON" if you want the ming to turn
your device on or "OFF" if you want this ming to turn your devic
f. Repeat the above seng aons to set the shutdown me.
Page | 16 of 28

Page | 17 of 28
g. Aer compg the sengs, the product can be turned on and oregularly at the set
mes and days ().

CONTROLING MULTIPLE AIRGLE DEVICES
If you have other Airgle® devices in the same locaon, you can control groups or all of them using
the mobile applicaon with a single click or automaon. Each group contains up to 100 devices
and muple groups can be created.
1. On the "My Device" page, click on a connected air purito enter the control page (1).
2. Click the pencil icon in the upper right corner to view the More opons of the product (2).
3. Select the "Create Group" buon to create a group of devices (3).
4. The "Select Device" page will show a list of other connected Airgle® devices (4), select all
devices you want to add to the group and click "Conrm" ().
Page | 18 of 28

Page | 19 of 28
.Enter a descripve group name which will be easy to recognize on the "My Device" page.
6. You can now view the devices in the group in "All Devices". (There is a group symbol aer the
group name for idcaon) (6). By clicking on this, you can control the group of devices
with a single click like powering on/o, adjug the fan speed and other funcons.

USE THE AUTOMATION FEATURES
Through the mobile applican, not only can you perform general product control like powering
on the air puri or changing the fan speed – but you can also control the air puri
intelligently using smart automaon. These automaon features can also be used for groups of
devices:
1. On the boom of the app, switch to the "Smart" screen. This is your home page for
intelligent product control and smart automaon. Click the "+" buon (1).
2. Click the "Launch Tap to Run" buon to create a one-click shortcut for your device or group
of devices (2).
3. Click the "Run the Device" buon to select which device or group of devices to apply this
shortcut to (3).
4. Choose a device or group of devices in the "All Devices" list (4). If you do not see your device
listed, ensure you've added it to your account by following the direcons in the ADD THE
AIRGLE® DEVICE TO YOUR APP secon.
Page | 20 of 28