SOMFY Digital Network 1860326 User manual

SDN Power over Ethernet (PoE) Gateway
Part Number: 1860326
The SDN Power over Ethernet (PoE) Gateway is a low-voltage power distribution and network-connected module that utilizes
PoE (Power over Ethernet) technology to power and control the Somfy® 24V RS485 motorization offer for shades and draperies.
SETUP READ AND FOLLOW ALL SAFETY INSTRUCTIONS
GATEWAY MUST BE INSTALLED BY A QUALIFIED TECHNICIAN.
(CHECK WITH LOCAL AND NATIONAL CODES FOR PROPER INSTALLATION)
CAUTION — Observe precautions for handling
electrostatic sensitive gateways.
WARNING — Risk of Electric Shock. Do not handle
energized gateway with wet hands or when standing
on wet or damp surfaces.
WARRANTY — voided if gateway has been modified
from its original configuration.
Do not use outdoors.
Use only with Class 2 Power Unit – 60VDC maximum.
Conforms to UL1310 standard – Certified to CSA
standard C22.2 NO. 223.
Mounting pattern is shown below.
1
2
3
4
5
6
7
Mounting Hole Location
Holes For Stand-alone
Metal Gateway
Snap in the wire harness male connector into the female connector as shown below:
Use two #8 self-tapping screws to mount the PoE Gateway as shown
(screws not provided)
All motors and wiring need to be connected to Gateway prior to powering
the SDN PoE Gateway
On the front top side of the PoE Gateway connect PoE CAT cable until you hear a
“CLICK”. Use a UTP (unshielded twisted pair) CAT5E or CAT6 cable*. The maximum
length of cable should not exceed 100 meters.
8
9
10


Installation Guide for PoE Gateway
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Mounting pattern is shown below.
Mounting Hole Location Holes For 180852
Standalone Metal Gateway
Snap in the wire harness male connector into the female connector as shown below:
Use two #8 self-tapping screws to mount the PoE Gateway as shown
(screws not provided).
On the front top side of the PoE Gateway connect PoE CAT cable until you hear a
“CLICK”. Use a UTP
(unshielded twisted pair) CAT5E or CAT6 cable*. The maximum length
of cable
should not exceed 100 meters.
*Please note the Power LED indicator will turn on once you have power. The LINK and ACTIVE indicators will blink on and off
rapidly once you have network connection.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE


Installation Guide for PoE Gateway
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Mounting pattern is shown below.
Mounting Hole Location Holes For 180852
Standalone Metal Gateway
Snap in the wire harness male connector into the female connector as shown below:
Use two #8 self-tapping screws to mount the PoE Gateway as shown
(screws not provided).
On the front top side of the PoE Gateway connect PoE CAT cable until you hear a
“CLICK”. Use a UTP
(unshielded twisted pair) CAT5E or CAT6 cable*. The maximum length
of cable
should not exceed 100 meters.
*Please note the Power LED indicator will turn on once you have power. The LINK and ACTIVE indicators will blink on and off
rapidly once you have network connection.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
!*Please note the Power LED indicator will turn on once you have power. The LINK
and ACTIVE indicators will blink on and off rapidly once you have network connection.
11
FIGURE 1. CONNECTION INFORMATION
This device could be used in other configurations than
listed below. For specification information on individual
products, see related product information. Follow all
SDN wiring standards for distance limitations.
CONNECTIONS AND INDICATORS
Notes:
• Control up to 4 low-voltage RS485 motors from
a SDN PoE Gateway.
• When operating motors as a group, motors will
cascade individually.
• Aligned operation available with
Sonesse® 30 RS485 DC (maximum 2 motors)
• Total wiring between SDN PoE Gateway and all
motors should not exceed 240 . when using
Liberty AV 9020126 cable.
• Total wiring between Network switch and SDN PoE Gateway
should not exceed 300 . using Category 5e cable.
ELEMENT FUNCTION
1Ethernet Input Power and Data Input
from PoE system
2SDN Output to motors Power and Data output to Somfy
24V DC SDN RS485 motors
LED Indicators
LABEL ELEMENT COLOR FUNCTION ON FUNCTION OFF
PWR Power Green Powered No Power
ACT Active
Ethernet Green Ethernet
Active
No Ethernet
Activity
LINK Communication
Link Orange Linked
(blinks)
Not Linked
(not blinking)
1
2
1
PWR
ACT
LINK
Side view
2
Side view
12 Download and install Programming Soware from this link.
https://www.somfysystems.com/support/tools/configuration-tools-soware
NOTE: Ref. # 1870445 includes the SDN Power over Ethernet (PoE) Gateway and PoE Gateway to Motor Adapter Cable (9025010) sold as a kit.

SDN Power over Ethernet (PoE) Gateway
P-0032
MOTOR COMPATIBILITY
© Copyright 11/2018 SOMFY SYSTEMS, LLC.
ORDERING INFORMATION
FIGURE 2. MOTOR DATA CABLE CONNECTIONS
MOTOR DATA CABLE INFORMATION
• Sonesse® ULTRA 50 RS485 (DC)
Part Number: 1134022
Sonesse® ULTRA 50 RS485 Data
and Power Pigtail (9020004)
Sonesse® 30 RS485 Data
and Power Pigtail (9020261)
Low-voltage (DC) Motor Connectors and Cables
Weidmuller Connects
to Network
JST to Motor
Required Cables:
Weidmuller Connector (5 pin)
(Sold separately)
SDN Low-voltage Motor
Power and Data Cable
(Sold separately)
9020127 - Plenum Rated
9020126 - Non-plenum Rated
OFFICE LOCATIONS
New Jersey
121 Herrod Blvd.
Dayton, NJ 08810
P: (800) 22-SOMFY (76639) .F: [phone]
Florida
1200 SW 35th Ave.
Boynton Beach, FL 33426
P: (800) 22-SOMFY (76639) .F: [phone]
California
15301 Barranca Pkwy
Irvine, CA 92618
P: (800) 22-SOMFY (76639) .F: [phone]
Canada
5178 Everest Drive
Mississauga, Ontario L4W2R4
P: 1-800-66-SOMFY .CN: [phone]
F: [phone]
• Sonesse® 30 RS485 (DC)
Part Number: 1000658
• Irismo™ 35 Mini (DC)*
Part Number: 1002951
Must order either cable per Gateway:
(Sold separately from 1860326)
PoE Gateway to Motor Adapter (9025010).
Cable length: 13 in.
PoE Gateway to Motor/animeo® Keypad Adapter
(Plenum Rated) (9025011).
Cable length:
13 in. overall, 8 in. to keypad
*Must order SDN Module with Enclosure kit for Irismo (1870282)
V+
V-
+
-
G
V+
V-
+
-
G
■SDN Motor Female
Connector (9025113)
■SDN Motor Male
Connector (9020743)
Optional Cables:
Motor Daisy Chain Adapter for
PoE Gateway (9020451)
Cable length: 36 in.
DC Drapery Adapter for
SDN/PoE Gateway (9025012)
Cable length: 36 in.
DESCRIPTION PART NUMBER
SDN Power over Ethernet (PoE) Gateway 1860326
(NOTE: 1870445 includes 1860326 & 9025010)
PoE Gateway to Motor Adapter 9025010
SDN PoE Gateway Kit 1870445
(NOTE: includes 1860326 & 9025010)
PoE Gateway to Motor/animeo® Keypad Adapter
(Plenum Rated) 9025011
Low voltage RS485 Motor Accessories
SDN Low-voltage Motor Power and Data Cable 9020126/9020127
(Plenum Rated) (from Liberty AV)
SDN Motor Male Connector 9020743
SDN Motor Female Connector 9025113
Sonesse® 30 DC RS485 Cable Data and Power Pigtail 9020261
Sonesse® Ultra 50 DC RS485 Cable Data and Power Pigtail 9020004
SDN PoE to DC SDN Drapery Motor Cable 9025012
SDN Module with Enclosure Kit for Irismo™ 1870282
For more information visit: https://www.somfysystems.com/products/1860326/sdn-poe-gateway
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Low-voltage (DC):
NOTE: Ref. # 1870445 includes the SDN Power over Ethernet (PoE) Gateway and
PoE Gateway to Motor Adapter Cable (9025010) sold as a kit.
NOTE: Not included with motorNOTE: Included with motor