Sonder FG0701398 User manual

PART LIST
A [ 1] TABLETOP
B [ 2] BASE
C [ 2] STRETCHER
Thank you for choosing this quality product. Be sure to check all packaging materials carefully for small parts that may have
become loose during shipment and place all parts on a non-abrasive surface.
IMPORTANT :These parts can be cumbersome and heavy to some people, therefore the assistance of two or more people is
recommended in order to prevent personal injury and ensure the furniture is not damaged during the assembly Process.
CUBE CONSOLE TABLE - SMALL
NO D ESC RI PT I O N QTY
1
2
3
4
HARDWARELIST
LOCK WASHER 8
PLAIN WASHER
ALLEN WRENCH
8
1
INSTRUCTIONS
1. Lay the back of the base (B) down into on a soft flat surface.
2. Align and insert the Stretcher (C) to between 2 base. KEEP
HOLDING THESTRETCHERWHILEASSEMBLY THEBASE
INTO THESTRETCHER.
3. Attach the base to the stretcher by using Allen bolt (1), lock
washer (2) and flat washer (3). DO NOT OVERTIGHTEN.
See FIGURE1.
ALLEN HEAD BOLT 8
SO N D ER
L I V I N G
Y E S
3214
FIGURE 1
B
BC
12
/

CAREINSTRUCTIONS
1. Dust often using a clean, soft, dry and lint-free cloth.
2. Blot spills immediately and wipe with a clean, damp, cloth.
3. We do not recommend the use of chemical cleansers, abrasives or furniture polish on our lacquered finish.
4. Lay the a long edge of the Top (A) into on a soft flat surface. Align the holes on the table base to the fixed nuts on the
table top. Insert the Allen bolts (1) together with Lock washers (2) and Flat washers (3). DO NOT OVERTIGHTEN.
See FIGURE2.
5. Turn the item in upright position. Assembly is complete.
FIGURE 2
3
2
1
4
A
22
/