Sonder RAFFLES User manual

PART LIST
A [ 1] TABLETOP
B [ 2] TABLELEAVES
C [ 2] BASES
Thank you for choosing this quality product. Be sure to check all packaging materials carefully for small parts that may have become
loose during shipment and place all parts on a non-abrasive surface.
IMPORTANT :These parts can be cumbersome and heavy to some people, therefore the assistance of two or more people is
recommended in order to prevent personal injury and ensure the furniture is not damaged during the assembly Process.
RAFFLES DINING TABLE
NO D ESC RI PT I O N QTY
1
2
3
4
HARDWARELIST
LOCK WASHER 12
ALLEN HEAD BOLT
M8x70MM 6
PLAIN WASHER
ALLEN WRENCH
12
1
INSTRUCTIONS
1. Gently, lay the table top (A) upside down on a soft
flat surface. Attach the table base into the table top,
align and insert Allen bolt (1) together with lock
washer (3) and flat washer (4) to each hole under
top through the hole on the stretcher of the base.
Tighten all the bolts by using wrench (5). DO NOT
OVERTIGHTEN. See FIGURE 01.
2. At the support rail installed on the bases, insert the
Allen bolts (2) together with lock washer (3) and flat
washer (4). Tighten all the bolts by using wrench (5).
DO NOT OVERTIGHTEN. See FIGURE 02.
ALLEN HEAD BOLT
M8x40MM 6
5
SO N D E R
L I V I N G
12
/

Metal lock
3. Unlock the locker under Table top ,
open the top panel, put the Table
leaves (B) at the middle of table top.
Make sure the exposed tennon on the
side edge of panels align with
pre-drilled holes on the side edge of
panels. Close top panels and clock
the lockers under Table top.See
FIGURE03 & 04.
4. Check the table leveling, and adjust
the levelers at the bottom of the base
if necessary. See FIGURE 05.
CAREINSTRUCTIONS
1. Dust often using a clean, soft, dry and lint-free cloth.
2. Blot spills immediately and wipe with a clean, damp, cloth.
3. We do not recommend the use of chemical cleansers,
abrasives or furniture polish on our lacquered finish.
IMPORTANT SAFETY INSTRUCTIONS
1. Please read all instructions carefully before assembling.
2. For your safety, assembly by two or more adults is strongly recommended.
3. Keep instructions for future use.
4. Use only vendor supplied hardware to assemble. Using unauthorized hardware could jeopardize the structural integrity of the item.
B
B
Leveler
22
/