
Meet Your New Songbird
retention cord
(optional)
tip
body battery
box
Body Hides in your ear and contains both the
battery and hearing aid microprocessor.
Battery Door Opens for insertion and removal
of the battery. The Battery Door is also the
on/off switch. Door open = off. Door closed =
on. Your Songbird AIR uses a single size “10A”
hearing aid battery.
Tip Sound is emitted from this opening. It is
important to keep this sound port clean. You
can use our easy to replace screens regularly to
keep your Songbird AIR working at its best.
Retention Cord Connects to the body and
comfortably rests inside the bowl of your ear to
help hold your Songbird AIR in place. If you have
larger or smaller ears you may find that using
one of the included different-sized retention
cords more comfortable.
It is easy to get started
1. Remove your Songbird AIR from the package
and attach the appropriate left or right ear
retention cord.
2. Insert the battery plus sign (+) up. When the
battery is loaded and the battery door is
fully closed, your Songbird is turned on.
To turn it off and conserve the battery, simply
open the battery door completely.
3. Inserting your Songbird Air in your ear
a). Hold the device with your thumb and index
finger while inserting into your ear canal.
b). Gently push the retention cord into the back
part of the ear.
c). Tuck the tip of the retention cord into the top
area of your ear and run your finger around
the bowl of your ear to “lock” in place.
4. Your Songbird AIR is so advanced that it
doesn’t require switch or buttons to change
volume settings. You can simply adjust the
volume by tapping on your ear two
times (2x) in quick succession. You are
trying to generate a “popping” sound, which
when heard by your Songbird, will cause it to
toggle sequentially to the next setting. You
will hear 1 to 4 beeps as your Songbird
AIR changes settings. One beep = quietest
setting. Four beeps = loudest setting. Four
loudness settings are preprogrammed for
your convenience.
www.songbirdhearing.com
hear here