Songmics ULMR34 User manual

ULMR34
www.songmics.com
Assembly Manual
Thank you for your purchase.
Please contact us if you have difculty with assembly or need replacement parts.
Wuppessen Customer Service is here to assist you.
Email: [email protected]
Please attach your User Name or Order ID so that we can assist you better.
Visit www.songmics.com or scan the QR code for
more product details.
You may also find "Songmics" on Facebook and
YouTube.

Introduction
2
џPlease read the following instruction carefully and use the product accordingly.
џPlease keep this manual and hand it over when you transfer the product.
џThis summary may not include every detail of all variations and considered steps. Please contact us when
further information and help are needed.
џCopying, reselling, translating or other modification of this instruction manual is forbidden without
authorization by ©Wuppessen, Inc.
General Guidelines
Notes
Warnings
џPlease assemble the product strictly according to each step outlined in the instructions.
џDo not tighten all the screws until assembly is completed.
џWipe the rack dry with a clean cloth for daily maintenance.
џOnly use the product on an even floor.
џUnder even distribution, the load capacity of a drawer is 4 kg, load capacity of the long board is 90 kg,
persons whose weight exceed this cannot sit on it.
џIf there are defective or missing parts, please do not use the product to avoid potential hazards.
џChildren are not allowed to climb or drag the product to avoid the personal injury caused by the falling of
drawer or toppling of product.
џDon’t jump or play on the product.

3
Parts List
3
A× 1
D× 2
× 1 C
E× 1 F× 1
B
× 1

3
Parts List
4
B
G× 2
× 2 H× 2 I
J× 6
× 4 K× 4 L
M× 1
× 16
N× 14
O
× 1
P
× 1
Q

Assembly Steps
5
1
2
A
B
6PCS
L
L
4PCS
M
I
C
M

Assembly Steps
6
3
4
8PCS
M
M
C
D
N
E
G
N
6PCS
N

7
Assembly Steps
5
4PCS
M
M
E
6
N
N
4PCS
N
F
H

8
Assembly Steps
7
4PCS
N
E
F
N

9
Assembly Steps
8
Q
9
A
D
Q
J
K

Assembly Steps
10
©
2018 Wuppessen Inc. 1730 Cedar St. Ontario, CA, 91761, U.S All rights reserved.
Version QM: 1.0
Stand: 05.02.2018
Get Free Products!
If your advice on either our product or instruction is taken, a free trial of our products will be provided!
10
J