Earthworks Audio ICON PRO User manual

ICON PRO
BROADCA T-QUALIT
XLR STREAMING MICROPHONE
Follow us on social media @EarthworksAudi
For more information, please visit
earthworksaudio.com or call 1-603-654-2433.

Thank you for purchasing theEarthworks
ICON Pro Streaming Microphone
YOUR PURC ASE INCLUDES
1 ICON Pro Microphone
1 Triad Orbit M2-R Moun
1 3/8" Thread Adapter
GETTING STARTED
The ICON Pro is a condenser microphone with active
electronics. This meansl
n Its output level will be naturally higher than many of
the dynamic microphones that it may be replacing.
It is not uncommon to need to reduce gain if you
were previously using a dynamic microphone.d
n You will need to engage phantom power on your
interface or preamp. Pro Tip: It's always a good idea
to plug in a condenser microphone while phantom
power is off and the channel is muted. After
engaging phantom power, give the microphone a
short time to settle before unmuting.
PROPER MAINTENANCE
To guarantee your microphone provides years of
performance, follow these guidelinesl
n Avoid extreme heat and condensing humidityd
n Rough handling may damage the microphone
even if no markings are visibl
n When not in use, keep the microphone in its case
ICON PRO
XLR MICROPHONE

ICON PRO
XLR MICROPHONE
TROUBLESHOOTING
If you encounter issues while using your Earthworks
Audio microphone, please make sure that: ,
# Your microphone is connected to an active power
supply with phantom power on.,
# Your microphone and XLR cable are well
connected.,
# The microphone is positioned at an appropriate
distance from the sound source.,
# External noise in your recording environment is
kept to a minimum.,
# Your recording space is at room temperature and
free of dust
If your issue persists after checking, please contact us
via our website.
SPECIFICATIONS
Frequency Response
20Hz - 30kHz
Polar Pattern
Cardioid
Sensitivity
20mV/Pa (-34dBV/Pa
Power Requirements
24-48v Phantom Powe
Peak Acoustic Input
139dB SP
Output
XLR (pin 2+
Output Impedanc
65Ω balanced (between pins 2
& 3)
Min Output Load
600Ω between pins 2 & 
Signal-to-Noise Rati
79dB (A weighted
Nois
16dB SPL (A weighted
Dimensions L x D
5.137" x 1.6
Weight
1.5lb (0.68kg)

ICON PRO
XLR MICROPHONE
WARRANTY
The ICON and ICON Pr carry a tw -year limited warranty
(parts and lab r). Please register y ur warranty at:
earthworksaudio.com/register. If y u have any pr blems with
y ur Earthw rks pr ducts, please c ntact ur warranty/repair
department by email at: [e-mail]
NOTE
This warranty nly applies t Earthw rks micr ph nes
purchased brand new. F r micr ph nes purchased/received
sec nd-hand, please c ntact us via ur website.
37 Wilt n Rd. Milf rd, NH 03055
inf @earthw rksaudi .c 
© 2021 Earthw rks Audi , Inc