SonicWALL 01-SSC-7166 User manual

SRA EX9000 System Fan Installation
Guide
This document provides instructions for removing and installing
a replacement system fan module on your SonicWall SRA
EX9000 appliance.
Removing the System Fan from the SRA
Appliance
To remove an existing or defective system fan from the SRA
appliance:
1 There is no need to power down the appliance. With a
Phillips screwdriver, loosen the thumbscrews securing the
metal vent fan cover.
2 Locate the fan unit that needs to be replaced. Loosen the
screws with a Phillips screwdriver.
3 Pull the fan module straight out of the appliance, noting its
orientation, and set it aside.
Inserting the System Fan into the SRA
Appliance
To insert the new system fan module into the SRA Appliance,
perform the following steps:
1 Remove the new system fan module and the SonicWall
tamper-evident sticker from the replacement fan shipping
package.
2 Insert the fan module into the empty slot, using the same
orientation as you noted when you removed the defective
module.
3 Push the fan module firmly into place to properly seat the
electronic connectors.
4 Using a Phillips screwdriver, tighten the screws for the fan
module until it is snug.
5 Confirm that the new fan is operating correctly by verifying
that the Alarm LED on the front of the appliance is no longer
lit.
6 Replace the metal vent fan cover, and tighten screws until
snug.
7 Peel the backing off the silver SonicWall tamper-evident
sticker, and apply the sticker so that it adheres to both the
vented cover plate and the main chassis of the unit.
A Note Regarding the Tamper-Evident Sticker
The SonicWall silver sticker is a tamper-evident label and is
required for FIPS compliant mode.
After replacing the system fan, you must replace the tamper-
evident sticker in order for the unit to maintain its FIPS
classification.

This Fan, SKU 01-SSC-7166 SONICWALL E-CLASS SRA EX9000 DUAL FAN
REPLACEMENT MODULE, is intended to be used only in the appliance listed
below:
SKU 01-SSC-9574 - SONICWALL E-CLASS SRA EX9000
Using this module with a SonicWall appliance that is not approved will void the
warranty for that appliance.
For information and related documents, see the following web site:
https://www.sonicwall.com/support
Copyright © 2019 SonicWall Inc. All rights reserved.
SonicWall is a trademark or registered trademark of SonicWall Inc. and/or its affiliates in the
U.S.A. and/or other countries. All other trademarks are property of their respective owners.
The information in this document is provided in connection with SonicWall Inc. and/or its
affiliates' products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document. SonicWall Inc. and/or its affiliates do
not make any commitment to update the information contained in this document. For more
information, visit http://www.sonicwall.com/legal.
SRA EX9000 System Fan Installation Guide
Updated - August 2019
232-003469-51 RevA
Legend
WARNING: A WARNING icon indicates a potential for property damage,
personal injury, or death.
CAUTION: A CAUTION icon indicates potential damage to hardware or loss of
data if instructions are not followed.
IMPORTANT, NOTE, TIP, MOBILE, or VIDEO: An information icon indicates
supporting information.
SonicWall®SRA
EX9000 System Fan
Installation Guide