Sonos LPS-05WB-I User manual

Wireless Charger
Important Product Information

THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO
CHANGE WITHOUT NOTICE.
Nopart of thispublicationmay be reproducedor transmittedinany form
or byany means,electronicor mechanical,including but not limited to
photocopying, recording, information retrieval systems, or computer
network withoutthe written permission ofSonos,Inc.
SONOS and all other Sonos product names and slogans are trademarks
or registeredtrademarksofSonos,Inc. SONOS Reg. U.S.Pat. & Tm.Off.
Sonos products may be protected by one or more patents. Our patent-
to-productinformationcanbefoundhere:
sonos.com/legal/patents
.
All other products and services mentioned may be trademarks or
service marks of their respective owners.
040121
© 2004-2021 by Sonos, Inc. All rights reserved.
Terms of Use, License, Warranty, and Privacy
To usethis Sonos product you have toaccept the Sonos Termsof
Use, License and Warranty Agreement, available at
www.sonos.com/
legal/terms-of-use
. Sonos privacy statement is available at
www.sonos.com/legal/privacy
.
Guides
For the latest Sonos product documentation, please go to
www.sonos.com/guides
.
Customer Support
VisitourWebsiteat
www.sonos.com/support
.Thereyoucan
browse our Knowledge Base or request assistance.
Note
:If a redLED appears on the wireless charger,itindicates the
presence of a foreign metal object or an internal fault. Go to
https://faq.sonos.com/chargerlight
to learn more.

1
To charge WPC,just place Sonos Roam onthe smooth, magnetized
side of the wireless charger..The wireless charger may charge
other Qi-compliant power receiver. When When the Qi-compliant
power receiver is placed on the WPC , the charge will start to
work. Do not place metallic or magnetic foreign objects between
the wireless charger and the power receiver, as this could cause
heating of the foreign object or cause the device not to charge
properly. Examples of these objects include coins, jewelry, and
credit cards.
The BLE radio shall not transmit any packets when no device is
receiving power from the wireless charger. The BLE radio shall
begin transmitting advertising packets within 1 second of a device
placed on the wireless charger. The BLE radio shall stop
transmitting 60 seconds +/- 1 seconds after a device is placed
on the wireless charger. The BLE radio shall transmit
advertising packets at a frequency of 2 Hz.
How to verifyBLE:
Record advertising packets using BLE diagnostic tools starting
with no device on the wireless charger, then continue recording
for 90 seconds after placing a Qi receiver on the Wireless Charger
Frequency range (MHz)
H-Field Strength
WPC 112-148kHz
-10.70dBuA/m
Frequency range (MHz)
Max. Transmit Power
(dBm/mW)
BLE 2402-2480MHz
-0.08 dBm/0.00098 mW

2
Regulatory Information
Available at:
https://www.sonos.com/support/policies
Declaration of Conformity
Hereby,Sonos, Inc. declares that the model name:LPS-05WB-Iisin
compliancewith
Directive2014/53/EU.ThefulltextoftheEU DeclarationofConformityisavailableat
https://www.sonos.com/ support/policies.
RF Exposure Information (MPE)
This equipment should be installed and operated with minimum distance 20cm between
the radiator & your body.
Canada
Theinstaller ofthis radio equipment must ensure that the product is
located
suchthatitdoesnotemitRFfieldinexcessofHealthCanada
limits forthe
general population; consult Safety Code 6,obtainable
from Health
Canada’sWebsite
www.hc-sc.gc.ca/rpb
.Asmentioned
before,theinstaller
cannotcontroltheantennaorientation. However,
theycouldplacethe
completeproduct ina waythat causes the problem mentioned above.
This class B digital apparatus complies withISEDCANICES-003(B), NMB-003(B),
RSS-GEN, RSS-216, and RSS-247. This device contains licence-exempt transmitter(s)
/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions: (1).This
device may not cause interference. (2).This device must accept any interference,
including interference that may cause undesired operation of the device
L'installateurdu présent matériel radio doit veiller à cequeleproduit soit
placé ou orienté de manière à n'émettre aucun champ radioélectrique
supérieur auxlimitesfixéespourlegrand public parle ministère fédéral Santé
Canada consultez le Codedesécurité 6 sur le site Web de Santé Canada à
l'adresse :
www.hc-sc.gc.ca/rpb
. Comme indiqué auparavant, l'installateur ne
peut pas contrôler l'orientation de l'antenne. Ilpeutnéanmoinsplacerle
produittoutentier demanièreà provoquer le problème décrit ci-dessus.
CetappareilnumériquedeclasseB est conformeà ISED CAN ICES-003(B),
à NMB-003(B), à RSS-GEN, à RSS-216 et à RSS-247. L’émetteur/récepteur
exempt de licence contenu dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement économique Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement

3
RF Exposure Requirements
To comply with FCC and Industry Canada exposure essential
requirements, a minimum separation distance of20cm (8inches) is
required between the equipment and the body of the user ornearby
persons.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference and (2) this device must accept any interference
received,includinginterference that may cause undesiredoperation.
Warning
: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However,there is no guarantee that interference
will not occur ina particular installation. Ifthis equipment does cause
harmful interference to radio ortelevision reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures: (1) Reorient or relocate the receivingantenna. (2)
Increase the separation between the equipment and receiver. (3)
Connect the equipment into an outlet ona circuit different from that
to which the receiver is connected. (4) Consult the dealer or an
experienced radio/TV technician to help.
Exigences en matière d'exposition aux radiofréquences
Pour satisfaire aux exigences essentielles dela FCC et d'Industrie
Canada concernant l'exposition, une distance minimum de 20cm (8
pouces) doit être respectée entre l'équipement etl'utilisateurou des
personnes se trouvant à proximité.
Recycling Information
This symbol on the product or on its packaging indicates
that this product shall not be treated as household waste.
Instead please deliver it to the applicable collection point
forthe recycling ofelectrical and electronic equipment. By
recycling this product correctly, you will help conserve
natural resources and prevent potential negative

4
environmental consequences. Formore detailedinformationabout
recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased
the product.
Nom 024 information (Mexico only)
Información para Nom 024 (unicamente para Mexico)
EU
Importer name/address
Company: Sonos Inc.
Address: 614 Chapala Street, S anta
Barbara, CA 93101
Contact name: Zibo Nelson
Contact TEL no: (+1) 805 965 3001
Mexico
Nombre / direcció n del importador
Company: Viastara SA de CV
Address: Blvd. Adolfo López Mateos 261,
Ampliacion Los Alpes,
Álvaro Obregón,01010
Ciudad de México, CDMX, Mexico
Contact name: Jesus Ledesma
Grupo deDesarrolloInteligente. (a.ka.
Inteligos)
Address: Blvd. Rogelio Cantú Gómez 370,
Santa María, 64650 Monterrey, N.L.,
Mexico:
Contact: Flavia Canamar
email:falvia.canamar@inteligos.com

Equipment
BrandName
ModelName
Equipo
Nombre de la marca
Nombre del modelo
5
Wireless Charger
Sonos
LPS-05WB-I
Customer Service Center Centro de atención al
cliente
Sonos, Inc.
614 Chapala St.
Santa Barbara, CA 93101
1 (800) 680-2345
www.sonos.com
Sonos Terms of Use,
License andWarranty
Agreement
Acuerdo de licencia y
garantíaycondicionesde
uso
www.sonos.com/legal/
terms-of-use
Input
Entrada 5V+/-5%,2.1Amax,10.2
W max
Output Salida 5 V max, 1 A max, 5 W max
Weight Peso 75 gm
Operating Temperature Temperaturade
funcionamiento
De 0 ºC a 40 ºC (de32 ºF a
104 ºF)

Other manuals for LPS-05WB-I
1
Table of contents
Other Sonos Batteries Charger manuals