Sonos BR100 User manual

Sonos Digital Music System
ZoneBridge
Setup Guide Installatiehandleiding Installationshandbok Guide d'Installation
Guida all'installazione Installationshandbuch Guía de configuración
TM
®

Sonos ZoneBridge Setup Guide
2
About the Sonos ZoneBridge
Use a ZoneBridge to connect the Sonos Digital Music System to your home network—
or if you want to set up a music zone in an area that lies beyond your current range, you
can use a ZoneBridge to extend the wireless range of your Sonos Digital Music System.
Where to Begin
Already have Sonos?
If you are adding this ZoneBridge to an existing Sonos music system, you can turn
directly to page 5 for installation instructions.
New to Sonos?
Unpack your Sonos components, and then follow the setup instructions in this guide in
sequential order to ensure that you set up your Sonos® ZoneBridge correctly. Once you
have the ZoneBridge (or a ZonePlayer if you want to play music in this room) connected
to your router, add ZonePlayers and the Controller(s) to complete the setup of your
Sonos Digital Music System. See "Network requirements" on page 4 to make sure your
home network is ready for Sonos, and then turn to page 7 for installation instructions.
Important: The Sonos ZoneBridge requires the latest Sonos software
release, so be sure to upgrade your music system prior to adding the
ZoneBridge to your system. If you are setting up a new system, please
select Yes when the CD-ROM displays a prompt to check for updates. If
you already have a Sonos system, please select Online Updates from
the System Settings menu on your Controller.

Sonos ZoneBridge Setup Guide 3
Your Computer Network
To play the digital music files stored on your computer, your computer network must
meet the following requirements:
Note: Your network must have a high-speed Internet connection, as the
Sonos Digital Music System is designed to provide you with online
software updates. Your Sonos system must be registered in order to
receive updates, so be sure to register during the setup process. We do
not share your e-mail address with other companies.
ZoneBridge
ZonePlayer 80
Controller
ZonePlayer 100
(amplified)
Router
Receiver
Computer

Sonos ZoneBridge Setup Guide
4
Network requirements
• DSL/cable modem, or LAN-based, high-speed Internet connection.
• If you currently have a cable or DSL modem connected directly to your
computer, you should install a router between your modem and your computer
to enhance your computer’s security, and to share the Internet connection with
the Sonos Digital Music System and other devices. If you do not have a router,
you should purchase and install one before proceeding.
Compatible operating systems
•WindowsVista™
• Windows® XP, including Windows® XP Media Center
•Macintosh®OSX
Please visit our Web site at http://faq.sonos.com/specs for the latest system
requirements.

Sonos ZoneBridge Setup Guide 5
Adding To EXISTING Sonos System
If you are adding this ZoneBridge to an existing Sonos system, please follow the steps
below. If you are setting up a new Sonos Digital Music System, please turn to page 7
instead.
You can use a Sonos ZoneBridge to replace the ZonePlayer™ that is currently wired to
your home network, or place a ZoneBridge in any location to extend the wireless range
of your Sonos Digital Music System.
Attach the power adapter and plug in the ZoneBridge. Be sure it is the
proper power adapter for your country. Check for software updates by
choosing one of the following options:
•UsetheSonos Controller to check for software updates by selecting System
Settings→Online Updates from the Music menu.
•UsetheDesktop Controller software to check for software updates by
selecting Help→Check for Updates.
If you are making a wired connection, connect an Ethernet cable (supplied). If
you are making a wireless connection, skip this step and continue.
Important: If you are replacing the wired ZonePlayer in your music
system with a Sonos ZoneBridge, first add the new ZoneBridge to your
music system (steps below). You can then unplug the wired ZonePlayer,
replace it with the Sonos ZoneBridge, and move the original ZonePlayer
to a new location.
1
2

Sonos ZoneBridge Setup Guide
6
Choose one of the following options:
•UsetheDesktop Controller software to add the ZoneBridge to your music system
by selecting Add a ZonePlayer or ZoneBridge from the Zones menu.
•UsetheSonos Controller to add the ZoneBridge to your music system by
selecting System Settings→Add a ZonePlayer or ZoneBridge from the
Music menu.
Now that you’ve added the ZoneBridge to your music system—
• If you are replacing the ZonePlayer that is currently attached to your router, you
can unplug the wired ZonePlayer, replace it with the Sonos ZoneBridge, and
move the original ZonePlayer to a new location.
• If you are using the ZoneBridge elsewhere in your house to extend your wireless
network, you can now move any of your existing ZonePlayers to other locations
if desired.
3
During the setup process, you will be asked to press and
release the Connect button on top of the ZoneBridge. The
indicator lights will flash green and white while the
ZoneBridge is connecting.

Sonos ZoneBridge Setup Guide 7
Setting Up NEW Sonos System
Connect the ZoneBridge to your home network by following the steps below. (If you are
going to use speakers in this music zone, you can connect a ZonePlayer 100 in step 2
instead. If you would like to utilize an external amplifier or powered speakers in this
music zone, you can connect a ZonePlayer 80 in step 2 instead.)
Attach the power adapter and plug in the Sonos ZoneBridge.
Connect an Ethernet cable (supplied) from one of the Ethernet switch
connectors on the back of your ZoneBridge to an open port on your router.
1
2

Sonos ZoneBridge Setup Guide
8
• Do not connect the ZoneBridge directly to your cable or DSL modem unless
your modem has a built-in router.
•If you don’t have a router, go to http://faq.sonos.com/norouter for instructions.
Router
ZoneBridge
Computer
Cable/DSL
modem
If you don’t have an open port on your router, you can
disconnect your computer from the router and connect it to the
ZoneBridge instead (see below). Then connect the ZoneBridge
into the router port the computer was previously plugged into.

Sonos ZoneBridge Setup Guide 9
Insert the Sonos System Setup CD-ROM, and follow the prompts to connect the
ZoneBridge. The CD-ROM will quickly and easily guide you through the setup
process. (If you purchased multiple Sonos components, you may have more
than one System Setup CD-ROM—use the one that accompanied your
ZoneBridge and you can put the others away.)
Now that you’ve set up the ZoneBridge you are ready to add the rest of your Sonos
components. Turn to "Adding More Sonos Components" on page 10.
Important: When you insert the CD-ROM, you will be prompted to
check for software updates. Be sure to select Yes, as the Sonos
ZoneBridge requires the latest software release.
3
For use with:
•WindowsVista
• Windows XP, including Windows XP Media Center
•MacintoshOSX
Please visit our Web site at
http://faq.sonos.com/specs for the latest
compatible operating system versions.

Sonos ZoneBridge Setup Guide
10
Adding More Sonos Components
Once you’ve set up your ZoneBridge, you can easily add more components any time. If
your house has structured (built-in) wiring, you can make a wired connection to
additional ZonePlayers or ZoneBridges. If you don’t have structured wiring, our built-in
wireless technology is ideal for you.
Add a ZonePlayer or ZoneBridge
1. Choose one of the following options:
• If you are adding an amplified ZonePlayer, attach desired speakers.
• If you are adding a ZonePlayer 80, connect an external amplifier.
• If you are adding a ZoneBridge, attach the power adapter.
Note: Thick walls, 2.4 GHz cordless telephones, and the presence of
other wireless devices can interfere with the wireless network signals
from your Sonos Digital Music System. If you are experiencing difficulty, it
is advisable to relocate the Sonos component, change the wireless
channel your music system is operating on, or make a wired connection
(Ethernet cable) either from your router to the ZoneBridge, or from one
ZonePlayer to another (see page 15.) If you are having trouble placing
your units within wireless range of each other, visit our Web site at
http://faq.sonos.com/range.
Note: For detailed ZonePlayer setup instructions, refer to the Setup
Guide packaged with your ZonePlayer, or start your Desktop Controller
software and select Sonos System Help from the Help menu.

Sonos ZoneBridge Setup Guide 11
2. If you are making a wired connection, connect a standard Ethernet cable from your
router, another ZonePlayer or ZoneBridge, or a live network wall plate to one of the
Ethernet switch connections on the back of the new Sonos component. If you are
making a wireless connection, skip this step.
3. Attach the power cable (if you haven’t already done so), and apply power.
4. Choose one of the following options:
•UsingtheSonos Controller, select System Settings→Add a ZonePlayer or
ZoneBridge from the Music menu.
•UsingtheDesktop Controller software, select Add a ZonePlayer or
ZoneBridge from the Zones menu.
Add a Controller
You should charge your new Sonos Controller when you remove it from the packaging.
Plug it into the power adapter, and then follow the Controller’s on-screen prompts to
add it to your music system (you can use the Controller while it is charging.) If you are
prompted to check for updates, please select Yes.
When you see the message Setup Complete, press the OK button located in the
middle of the scroll wheel and you are ready to play some music! Press the Music button
and then choose one of the following options—

Sonos ZoneBridge Setup Guide
12
Music menu
Once you have set up at least one ZonePlayer, you can press the Music button on your
Sonos Controller to display the Music menu.
• To activate a free music service trial, select Music Service Trials. (Your music
systemmust be registered to activate a trial, so if you havenot yet registered, you
can do it now by selecting System Settings→Advanced Settings→System
Registration.)
• To select an Internet radio station, select Internet Radio.
• To add music folders located on a computer in your home network , open your
Desktop Controller software and select Set Up Music Library→Add a Share
from the Music menu.
• You can use the Sonos Controller to add music folders by selecting System
Settings→Music Library Management→Music Library Setup from the
Music menu, but it’s easier to use the Desktop Controller for this one-time
task.
To read more about the features and
functions of your new Sonos system,
please download the user guide from
our Web site at:
www.sonos.com/support/documents
or start your Desktop Controller
software and select Sonos System
Help from the Help menu.

Sonos ZoneBridge Setup Guide 13
ZoneBridge Front
Connect button Press the Connect button to join the ZoneBridge to
your Sonos Digital Music System.
ZoneBridge status indicator • LED Flashes white when powering up; flashes green
and white when connecting to your Sonos Digital
Music System.
• LED Solid white when powered up and connected to
your Sonos Digital Music System (normal operation).
• LED Flashes amber when a fault condition is
detected.
ZoneBridge
status
indicator Connect
button

Sonos ZoneBridge Setup Guide
14
ZoneBridge Rear Panel
Ethernet switch connectors
(2)
Use Category 5 Ethernet cable to connect to a router,
computer, or additional network device such as a
network-attached storage (NAS) device.
AC power (mains) input Use the supplied power adapter to connect to power
outlet. Be sure to use the proper power adapter for
your country.
Ethernet
switch
connectors AC power
(Mains) input