Sony DCM -M 1 User manual

3-866-152-12 (2)
©2000 Sony Corporation
Operating Instructions
Before operating the unit, please read this manual thoroughly,
and retain it for future reference.
Owner’s Record
This recorder’s model number is located on the bottom of the unit
and serial number is located on the inside the disc lid. The AC
power adaptor/charger’s model and serial numbers are located on
the bottom. Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer
regarding this product.
DCM -M 1
M iniDisc
AV Recorder
Model No. DCM -M 1 Model No. AC-VQ800
Serial No. Serial No.
Downloaded from: https://www.usersmanualguide.com/

2
Welcom e!
Congratulations on your purchase of this Sony MiniDisc AV Recorder. With your MiniDisc AV Recorder,
you can capture life’s precious moments with superior picture and sound quality. Your MiniDisc AV
Recorder is loaded with advanced features, but at the same time it is very easy to use. You will soon be
producing home video that you can enjoy for years to come.
WARNING
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
For custom ers in the U.S.A.
This symbol is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert
the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
For cust om ers in t he U.S.A. and
CANADA
DISPOSAL OF LITHIUM ION BATTERY.
LITHIUM ION BATTERY.
DISPOSE OF PROPERLY.
You can return your unwanted lithium ion
batteries to your nearest Sony Service Center
or Factory Service Center.
Note: In some areas the disposal of lithium
ion batteries in household or business
trash may be prohibited.
For the Sony Service Center nearest you call
1-800-222-SONY (United States only).
For the Sony Factory Service Center nearest
you call 416-499-SONY (Canada only).
Caution: Do not handle damaged or leaking
lithium ion battery.
Never expose the battery pack to temperatures
above 140°F (60°C) such as in a car parked in
the sun or under direct sunlight.
JBlend1995 – 1999 Aplix Corporation. All
rights reserved.
Usable M iniDiscs
Use an MD DATA2 disc having
this logo. You cannot use a MD
DATA disc.
MD VIEW is a registered
trademark of Sony Corporation
for MD DATA2 discs.
You can use an audio MD
having this logo for playing
only.
Downloaded from: https://www.usersmanualguide.com/

3
CAUTION
The use of optical instruments with this
product will increase eye hazard.
This label is located under the video/audio
control buttons.
CAUTION
Use of controls or adjustments or performance
of procedures other than those specified herein
may result in hazardous radiation exposure.
For custom ers in CANADA
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
Declaration of Conf ormity
Trade Name: SONY
Model No.: DCM-M1
Responsible Party:Sony Electronics Inc.
Address: 1 Sony Drive, Park
Ridge, NJ, 07656 USA
Telephone No.: 201-930-6972
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions.: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
CAUTION
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
Note:
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the
equipment and receiver.
— Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
— Consult the dealer or an experienced radio/
TV technician for help.
If you have any questions about this product,
you may call:
Sony Direct Response Center 1-(800)-222-7669
or write to:
Sony Direct Response Center 12451 Gateway
Blvd. Fort Myers, FL 33913
For Service and Technical Assistance on
MD DiscamCall To Free 1-888-449-SONY
(United States only).
Downloaded from: https://www.usersmanualguide.com/

4
Table of contents
What you can do with your
camcorder ....................................... 5
Checking supplied accessories .......... 7
Get ting St arted
Using this manual ............................... 8
Step 1 Preparing the power
supply ........................................... 10
Step 2 Inserting an MD DATA2
disc ................................................ 16
Step 3 Using the touch panel .......... 18
Recording – Basics
Recording a picture ........................... 22
Checking the recorded picture ........ 29
Playback – Basics
Playing the disc .................................. 30
Viewing the recording on TV .......... 35
Advanced Recording
Operat ions
Recording audio including photo -
Interview recording .................... 36
Self-timer recording .......................... 38
Shooting backlit subjects (BACK
LIGHT) ......................................... 40
Using the PROGRAM AE function 41
Focusing manually ............................ 43
Adjusting the exposure manually ... 44
Releasing the STEADYSHOT
function ......................................... 45
Adjusting the white balance
manually ....................................... 46
Advanced Playback
Operat ions
Displaying two pictures –
Picture-in-picture ........................ 47
Displaying nine consecutive scenes
– 9 FRAME SEQUENCE ............ 49
Playing back repeatedly ................... 51
Playing back in random order –
SHUFFLE ...................................... 53
Scanning the top of tracks –
INTRO SCAN .............................. 54
Sorting the tracks ............................... 55
Jumping to the desired track ........... 56
Setting the playing time of still
picture tracks ............................... 57
Edit ing
Checking the disc information ........ 58
Checking the track information ...... 59
Changing the index image ............... 62
Moving tracks .................................... 64
Erasing tracks ..................................... 65
Copying tracks ................................... 68
Dividing tracks .................................. 70
Trimming unnecessary scenes ......... 72
Grouping the tracks .......................... 74
Making a photo track from
a movie ......................................... 76
Draw ing/Ef fect
Drawing on the picture .................... 78
Inserting a title track ......................... 82
Switching the tracks with special
effects ............................................ 83
Applying the picture effect to the
tracks ............................................. 86
Cust om izing Your Camcorder
Adjusting the brightness and
color of the LCD screen .............. 87
Adjusting the brightness of the
viewfinder .................................... 88
Resetting the date and time ............. 89
Changing the menu settings ............ 91
Using w ith Ot her Equipm ent
Dubbing on a tape ............................. 96
Printing the still picture .................... 97
Listening to an audio MD ................ 98
Viewing on the computer
display ........................................ 100
Additional Information
Precautions and maintenance
information ................................ 105
Usable MiniDiscs ............................. 109
Troubleshooting .............................. 111
Warning indicators and
messages ..................................... 116
Specifications ................................... 118
Using your camcorder abroad ....... 120
Quick Ref erence
Identifying the parts and controls 121
Quick Function Guide .................... 130
Index .................................................. 131
Downloaded from: https://www.usersmanualguide.com/

Getting started
5
What you can do w it h your cam corder
Your camcorder can record in the MD DATA2 disc:
•Moving pictures (movies) as long as 10 minutes in SP mode or 20 minutes in LP mode
•Still pictures (photos) of up to 4,500 shots
•Audio of up to 260 minutes.
REMAIN
01:23
00:07
0001 7.4.1999 2:58
PM
Hold the camcorder w ith both
hands w hen recording.
You can select the picture to play
back directly by touching the LCD
screen.
Play or edit the picture by touching
the menu displayed on the LCD
screen.
Insert the disc from the bottom of
the camcorder.
Downloaded from: https://www.usersmanualguide.com/

6
Various f unct ions available w it h M iniDisc
What you can do w ith your camcorder
Digital video edit functions (p. 58) Check the picture just after
recording (p. 47)
Draw on the picture (p. 78). Easy to move or erase the picture
(p. 64, 65)
Long audio recording including
three photos - Interview recording
(p. 36)
PHOTO
AUDIO
STBY
00:01
0:00:010001
Listen to audio M D (p. 98).
Downloaded from: https://www.usersmanualguide.com/

Getting started
7
Checking supplied accessories
7
1AC-VQ800 AC adaptor/ charger (1)
(p. 10, 15)
2AC pow er cord (1) (p. 10, 15)
3M M D-650A M D DATA2 disc (1) (p. 16)
4ZK-ET1 connecting cord (1) (p. 15)
5NP-F550 battery pack (1) (p. 10, 14)
6RM T-DCM 1 Wireless Remote
Commander (1) (p. 32)
12 3
46
Make sure that the following accessories are supplied with your camcorder.
89
7Size AA (R6) battery for Remote
Commander (2) (p. 125)
8Input pen (1) (p. 18)
9Tripod attachment (1) (p. 122)
0A/ V connecting cable (1) (p. 35)
qa Lens cap (1) (p. 22)
qs Ferrite cores (large ×1, small ×2)
(p. 124)
qd Shoulder belt (p. 121)
0qa
5
qs
Downloaded from: https://www.usersmanualguide.com/

8
— Getting St arted —
Using this m anual
As you read through this manual, the buttons and settings on your camcorder are
shown in capital letters.
For example, “set the POWER switch to CAMERA.”
When you carry out an operation, you will hear a beep to indicate that the operation is
being carried out.
What is a “ t rack”?
A picture or audio recorded in the MiniDisc is called “track.” A track can be of any
length and varies depending on how long you recorded the picture or audio.
•Movie track
The track starts when you press START/STOP to begin recording and ends when you
press START/STOP again to stop recording. (If you have selected the “ANTI
GROUND” recording mode in the menu (p. 93), a track is made while you are
pressing START/STOP.)
•Photo track
A photo makes one track.
•Interview recording (Audio track)
The track starts when you press AUDIO REC to begin audio recording and ends when
you press xto stop recording. If you record photos during audio recording, the track
includes those photos.
•Title track and Drawing track
The title track or drawing track makes an individual track, except when you draw on
a picture.
Each track is automatically assigned a track number. You can label the track yourself.
The tracks are produced on a disc as shown below. On the index display, each track is
indicated by one image regardless of the length or type of the track.
When you edit t he pict ure or audio
Editing the picture and audio is done by tracks. When you move, erase or copy the
picture or audio, the track of the selected picture or audio is moved, erased or copied.
1 track
(Movie)
1 track
(Movie)
1 track
1 track
(Interview recording)
Recording
started Recording
stopped
Recording
started
Recording
stopped
Photo
recorded
Started
Stopped
Downloaded from: https://www.usersmanualguide.com/

Getting started
9
Using this m anual
Note on TV color syst em s
TV color systems differ from country to country. To view your recordings on a TV, you
need an NTSC system-based TV.
Copyright precautions
Television programs, films, video tapes, and other materials may be copyrighted.
Unauthorized recording of such materials may be contrary to the provision of the
copyright laws.
Precautions on cam corder care
•The LCD screen and/or the color view finder are manufactured using high-
precision technology. How ever, there may be some tiny black spots and/ or
bright spots (red, blue or green in color) that constantly appear on the LCD
screen and/ or in the color view finder. These spots occur normally in the
manufacturing process and do not affect the recorded picture in any w ay.
Effective number of pixels is 99.99% or more.
•Do not let your camcorder get wet. Keep your camcorder away from rain and sea
water. Letting your camcorder get wet may cause your camcorder to malfunction.
Sometimes this malfunction cannot be repaired [a].
•Never leave your camcorder exposed to temperatures above 140°F (60°C), such as in a
car parked in the sun or under direct sunlight [b].
•Do not place your camcorder so as to point the viewfinder or the LCD screen toward
the sun. The inside of the viewfinder or LCD screen may be damaged [c].
[a] [b] [c]
Contents of the recording cannot be compensated if recording or playback is not made due to a
malfunction of the camcorder, MiniDisc, etc.
Note on heating
•Your camcorder may heat up during operation due to the internal circuit operation.
This is not a malfunction. The temperature differs depending on the operating mode.
•If your camcorder and AC adaptor/charger heat up more than usual, turn off your
camcorder and remove the battery pack. When using on the AC adaptor/charger,
disconnect the AC adaptor/charger from a wall outlet. Then contact your nearest
Sony dealer.
Downloaded from: https://www.usersmanualguide.com/

10
Charging the bat t ery pack
Use the battery pack after charging it for your camcorder.
Your camcorder operates only with the “InfoLITHIUM” battery pack (L series). If you
want to use the camcorder right away indoors, use on the AC adaptor/charger (p. 15).
(1) Set the mode change switch to “CHARGE.”
(2) Connect the power cord to the AC adaptor/charger.
(3) Connect the power cord to a wall outlet.
A beep sounds and the display window lights up.
(4) Place the battery pack on the AC adaptor/charger with the bmark facing the
terminal shutter.
(5) Slide the battery pack in the direction of the arrow.
Press the battery pack until the terminal shutter enters completely into the AC
adaptor/charger.
Charging begins. When the remaining battery indicator becomes and the
CHARGE lamp lights up, normal charge is completed. For full charge, which allows
you to use the battery slightly longer than “normal charge,” leave the battery pack
attached until the CHARGE lamp goes out.
Remove the battery pack when required. It can be used even if the charging is not
completed.
To rem ove t he batt ery pack
Slide the battery pack in the opposite direction of installing, then lift it straight out.
Step 1 Preparing the pow er supply
VTR/CAMERA CHARGE
CHARGE lamp1
2
3
4, 5
Downloaded from: https://www.usersmanualguide.com/

11
Getting started
St ep 1 Preparing the pow er supply
Normal charge Full charge
Notes
•When the mode change switch is set to VTR/CAMERA during charging, charging
stops.
•If the CHARGE lamp does not light or flash, check that the battery pack is correctly
attached to the AC adaptor/charger. If it is not attached it will not be charged.
•When you install the battery pack, be sure to not hit it to the terminal of the AC
adaptor/charger.
•Be sure that nothing metallic comes into contact with the metal parts of the unit or
connecting plate. If it does, a short may occur and the unit may be damaged.
Charging t im e
The following table shows the charging time for the battery pack which is discharged
completely.
Battery pack Full charge (Normal charge)
NP-F550 (supplied) 115 (55)
•Approximate minute to charge an empty battery pack fully (Full charge).
•Approximate minute in parentheses indicates the time when you charge normally
(Normal charge).
•The charging time may differ depending on the condition of the battery pack or the
temperature of the environment.
Remaining battery indicator
Recording tim e
Recording w ith Recording w ith
Battery pack the view finder the LCD screen
Continuous* Typical* * Continuous* Typical* *
NP-F550 (supplied) 75 (70) 37 (35) 65 (60) 32 (30)
•Approximate minutes when you use a fully charged battery
•Numbers in parentheses indicate the time using a normally charged battery.
•If you use both of the LCD screen and the viewfinder, the recording time will be
slightly shorter than recording with the LCD screen only.
*Approximate continuous recording time at 77°F (25°C). The battery life will be
shorter if you use your camcorder in a cold environment.
* * Approximate minutes when recording while you repeat recording start/stop,
zooming and turning the power on/off. The actual battery life may be shorter.
Downloaded from: https://www.usersmanualguide.com/

12
St ep 1 Preparing the pow er supply
DISPLAY
CHANGE
DISPLAY
CHANGE
DISPLAY
CHANGE
BATTERY LIFE
m
TIME TO CHG
NORMAL m
TIME TO CHG
FULL hm
Playing tim e
M D DATA2 disc
Battery pack Playing time Playing time
on LCD screen w ith LCD closed
NP-F550 (supplied) 80 (75) 100 (95)
Audio M D
Battery pack Playing time Playing time
on LCD screen w ith LCD closed
NP-F550 (supplied) 100 (95) 135 (130)
•Approximate minutes when you use a fully charged battery
•Numbers in parentheses indicate the time using a normally charged battery.
•The battery life will be shorter if you use your camcorder in a cold environment.
To check charging
During charging, you can check the charging time on the display. BATTERY LIFE
lights up on the display shortly after charging has started.
Press DISPLAY CHANGE during charging.
Each time you press DISPLAY CHANGE, the display changes as follows.
The remaining battery time when the battery pack being charged is attached to an
“InfoLITHIUM” equipment.
The time is not displayed when the remaining
battery time is less than 5 minutes.
The remaining time until normal charge is
completed.
The remaining time until full charge is completed.
Downloaded from: https://www.usersmanualguide.com/

13
Getting started
St ep 1 Preparing the pow er supply
What is ”InfoLITHIUM ?”
The “InfoLITHIUM” is a lithium ion battery pack which can exchange data with
compatible electronic equipment about its battery consumption. Sony recommends that
you use the “InfoLITHIUM” battery pack with electronic equipment having the
mark.
Notes
•The time display shows the approximate time when charging at 50°F to 86°F (10°C to
30°C). The time display may differ from the actual charging time depending on using
conditions and circumstances.
•The time display may show “– – – –” in the following cases. However, the AC
adaptor/charger is not malfunctioning.
– The remaining battery time is less than 5 minutes.
– There is a difference between the displayed time and actual charging time. Even if
this happens, continue charging.
•Full charge requires about 1 hour after normal charge is completed. If you remove the
battery pack between normal charge and full charge, the charging time may not be
displayed properly in the next charging.
•If the charging time is not displayed properly, fully charge the battery pack. The
charging time will be displayed properly.
•When you attach a fully charged battery pack to this AC adaptor/charger, “TIME TO
CHG FULL 1h” may appear on the display. However, this is not a malfunction.
•You may wait for a while after pressing DISPLAY CHANGE until the display shows
the time indication.
• To display the remaining battery time of a new battery, attach it to your camcorder
and use it for about 30 seconds. Then, charge the battery with the AC adaptor/
charger.
Downloaded from: https://www.usersmanualguide.com/

14
St ep 1 Preparing the pow er supply
Inst alling the bat t ery pack
Install the battery pack to use your camcorder outdoors.
(1) Slide OPEN (BATT) down to open the battery compartment lid.
(2) With the Vmark pointing down, insert the battery pack until it clicks.
(3) Shut the lid.
To rem ove t he batt ery pack
Open the lid and push the catch.
Note
Put your hand by the battery compartment lid to prevent the battery pack from
dropping.
Remaining battery time indicator of the camcorder
•Approximate time remaining for continuous recording will be displayed on the LCD
screen or in the viewfinder. The time may not be correct depending on the condition
or environment the camcorder is used.
•It will take about 1 minute for the camcorder to display a correct remaining time when
you open or close the LCD screen.
•The remaining time displayed on the camcorder may differ from that on the AC
adaptor/charger.
21 3
Catch
Downloaded from: https://www.usersmanualguide.com/

15
Getting started
VTR/CAMERA CHARGE
1
Connect ing to a w all out let
When you use your camcorder for a long time, we recommend that you power it from a
wall outlet using the AC adaptor/charger.
(1) Set the mode change switch to VTR/CAMERA.
(2) Connect the power cord to a wall outlet.
(3) Connect the power cord to the AC adaptor/charger.
(4) Connect the connecting cord to the DC OUT connector of the AC adaptor/
charger.
(5) Install the connecting cord to the camcorder.
Insert the connecting adaptor until it clicks. Pass the cord through the cord
shutter so that the cord is not caught by the battery lid.
To disconnect t he connecting cord
Open the lid and push the catch.
Notes
•If you set the mode change switch to CHARGE while operating the camcorder, the
power supply to the camcorder stops.
•Be sure that nothing metallic comes into contact with the metal parts of the AC
adaptor/charger. If it does, a short may occur and the AC adaptor/charger may be
damaged.
•You cannot charge the battery pack attached to the AC adaptor/charger while
supplying the power to the camcorder.
•Keep the AC adaptor/charger away from the camcorder if the picture is disturbed.
•The power cord must only be changed at an authorized service shop.
•The AC adaptor/charger is not disconnected from the AC power source (house
current) as long as it is connected to the wall outlet, even if the AC adaptor/charger
itself has been turned off.
Using a car battery
Use Sony DC adaptor/charger DC-VQ800 (not supplied) or car battery adaptor
DCC-L50 (not supplied).
St ep 1 Preparing the pow er supply
2
4
3
5
Downloaded from: https://www.usersmanualguide.com/

16
Step 2 Inserting an M D DATA2 disc
Use an MD DATA2 disc. You cannot record on other types of MDs.
(1) Lift the bOPEN protrusion and open the LCD panel until it stops.
(2) Slide DISC EJECT on the bottom in the direction of the arrow and open the lid
manually.
(3) Insert the disc.
Push the disc in the direction of the arrow deeply into the disc compartment
with the label facing up.
(4) Close the disc lid.
To eject the disc
Follow the procedure above, and take out the disc in step 3.
Notes
•If the POWER switch is set to “CAMERA” or “INTERVIEW,” you may not be able to
eject the disc. If this happens, turn off the power first and then reconnect the power
sources. Then try again.
•Do not face the disc opening down when you insert or eject a disc to avoid dropping
the disc.
To prevent misoperation
Turn the POWER switch to “OFF” when you insert or eject a disc.
DISC EJECT
1
2
2
1
34
Downloaded from: https://www.usersmanualguide.com/

17
Getting started
St ep 2 Insert ing an M D DATA2 disc
To prevent accidental erasure
Slide open the tab at the side of the disc (so the tab is concealed).
Rear of the disc
Downloaded from: https://www.usersmanualguide.com/

18
You operate your camcorder by selecting the items on the index display or menu on the
LCD screen.
Select the tracks or menu items by touching with the input pen or a finger, or using the
control dial.
The operation will be described mainly by touching the LCD screen with the input pen
in this manual.
How to operate the menu is described here as an example.
Using t he input pen
Example: turning off the beep
(1) Pull out the input pen.
Adjust the length of the input pen. The length of the input pen can be
extended by about 12/32 inch (about 1 cm).
(2) Lift the bOPEN protrusion and open the LCD panel. Turn the LCD panel over
and move it back into the camcorder body with the LCD screen facing out.
You will get more accurate results by touching the LCD screen in this position.
Step 3 Using t he touch panel
1
2
180°
Downloaded from: https://www.usersmanualguide.com/

19
Getting started
St ep 3 Using the touch panel
(3) Set the POWER switch to PLAY/EDIT while pressing the small green button.
The index display appears. If nothing is recorded in the disc, no index image
will be displayed.
(4) Touch SET UP on the left of the screen.
(5) Touch BEEP.
(6) Touch OFF.
(7) Touch to close the menu.
The index display appears.
Notes on the LCD screen
•Operative pressure may be influenced by the atmospheric temperature or pressure.
•You can touch the LCD panel directly with a finger. Do not touch the LCD panel with
a wet hand.
•Do not push on the LCD screen with a pointed object such as a pen.
Notes on the input pen
•Use only the supplied input pen. You may not be able to operate your camcorder with
other commercially available input pens.
•Do not push on or hit the LCD panel hard with the input pen. Doing so may cause
your camcorder to malfunction.
•Take care not to damage or dirty the tip of the input pen.
•If you made the input pen longer, shorten it to the original length before you put it
back into your camcorder.
I
N
T
ERVIEW
C
A
M
E
R
A
P
L
A
Y
/
E
D
I
T
OFF
3
REMAIN 01:23
00:070001
SET UP
RETURN
LCD BRIGHT
LCD COLOR
VF BRIGHT
CLOCK SET
AVLS
BEEP
COMMANDER
ON
OFF
SET UP
RETURN
LCD BRIGHT
LCD COLOR
VF BRIGHT
CLOCK SET
AVLS
BEEP
COMMANDER
ON
OFF
SET UP
RETURN
LCD BRIGHT
LCD COLOR
VF BRIGHT
CLOCK SET
AVLS
BEEP
COMMANDER
OFF
45
67
Downloaded from: https://www.usersmanualguide.com/

20
If the LCD screen is dirty
•Do not use the input pen when the LCD screen is dirty or dusty. Doing so may
damage the LCD screen.
•If the LCD screen is dirty, turn the POWER switch to “OFF” first and then wipe the
LCD screen lightly with a soft dry cloth.
If the LCD screen does not react correctly to touching
Calibrate it (p. 108).
When PLEASE WAIT is displayed on the LCD screen
Do not apply a mechanical shock to the camcorder, or disconnect the power source.
Using t he short cut menu
You can display some of the menu items quickly.
(1) Press MENU during playback or pause.
The shortcut menu appears.
(2) Touch the desired item. The setting or adjusting display of the item appears.
To t urn off the short cut m enu
Press MENU again.
St ep 3 Using the touch panel
DRAWING
PICTURE IN PICTURE
9 FRAME SEQUENCE
INDEX CHANGE
LCD BRIGHT
LCD COLOR
MENU
Downloaded from: https://www.usersmanualguide.com/