Sony XR-2753 User manual

Actual total number: Sony XR-2753 (E,Pl,Bg,Hu,R) 3-859-732-22 (1)
1997 by Sony Corporation
FM/MW/LW
Cassette Car
Stereo
H
BG
PL
EN
RF
Operating Instructions
Instrukcja ob sugi
àÌÒÚ Û͈ËflÁ‡ÂÍÒÔÎÓ‡Ú‡ˆËfl
Haszn·lati ⁄tmutatÛ
àÌÒÚ Û͈ËflÔÓ˝ÍÒÔÎÛ‡Ú‡ˆËË
XR-2753
For installation and connections, see the supplied installation/connections
manual.
Informacji o instalacji i pod ±czeniu naleøy szukaÊ w za ±czonej instrukcji
instalacji/pod ±czania.
á‡ËÌÒÚ‡ÎË ‡ÌÂËÒ‚˙ Á‚‡ÌÂ̇‡Ô‡ ‡Ú‡,ËÁÔÓÎÁÛ‚‡ÈÚÂÔ ËÎÓÊÂÌËfl
̇ ˙˜ÌËÍ.
A kÈsz¸lÈk ¸zembehelyezÈsÈrıl s csatlakoztat·s·rÛl rÈszletes t·jÈkoztat·st tal·l
az ‹zembehelyezÈsi/csatlakoztat·si ˙tmutatÛban.
è ‰ÛÒÚ‡ÌÓ‚ÍÓÈËÔÓ‰Íβ˜ÂÌËflÏËÓ· ‡ÚËÚÂÒ¸ÍÔ Ë·„‡ÂÏÓÈËÌÒÚ Û͈ËË
ÔÓ ÛÒÚ‡ÌÓ‚ÍÂ Ë ÔÓ‰Íβ˜ÂÌ˲.
3-859-732-22 (1)

2
Actual total number: Sony XR-2753 (E,Pl,Bg,Hu,R) 3-859-732-22(1)
EN
Table of contents
Getting Started
Resetting the unit ................................................ 3
Cassette Player
Listening to a tape ............................................... 3
Playing a tape in various modes ....................... 4
Radio
Memorising stations automatically
— Best Tuning Memory (BTM) ................... 5
Memorising only the desired stations .............. 5
Receiving the memorised stations .................... 6
Other Functions
Adjusting the sound characteristics ................. 6
Muting the sound ................................................ 6
Changing the sound and beep tone ................. 7
Additional Information
Precautions ........................................................... 7
Maintenance ......................................................... 8
Removing the unit .............................................. 8
The rotary remote labels .................................... 9
Location of controls .......................................... 10
Specifications ..................................................... 11
Troubleshooting guide ..................................... 12
Index ................................................................... 13
Welcome!
Thank you for purchasing the Sony Cassette
Car Stereo. This unit lets you enjoy a variety of
features by using a rotary remote.

3
Actual total number: Sony XR-2753 (E,Pl,Bg,Hu,R) 3-859-732-22(1)
EN
Getting Started
Resetting the unit
Before operating the unit for the first time or
after replacing the car battery, you must reset
the unit.
Press the reset button with a pointed object,
such as a ballpoint pen.
Note
Pressing the reset button will erase all the memorised
programme and memory functions.
Reset button
Cassette Player
Listening to a tape
Insert a cassette.
Playback will start automatically.
If a cassette is already inserted, press
(SOURCE) repeatedly until “TAPE” is
displayed.
The side facing up is being played.
The side facing down is being played.
Tip
To change the tape transport direction, press (MODE)
(*) during tape playback.
Fast-winding the tape
During playback, press either side of
(SEEK/AMS) for one second.
To start playback during fast-forwarding or
rewinding, press (MODE) (*).
Press
(OFF)
6
To
Stop playback
Eject the cassette
Fast-forward
Rewind
SEEK
AMS
TAPE 
TAPE 
Getting Started/Cassette Player

4
Actual total number: Sony XR-2753 (E,Pl,Bg,Hu,R) 3-859-732-22(1)
EN
SEEK
AMS
To locate the succeeding tracks
To locate the preceding tracks
Playing a tape in various
modes
Searching for the desired track
— Intro scan
Press (1) during playback.
“INTRO” appears on the display.
The first 10 seconds of all the tracks are played.
When you find the desired track, press again.
The unit returns to the normal playback mode.
Playing tracks repeatedly
— Repeat play
Press (2) during playback.
“REP” appears on the display.
When the current played track is over, it will
be played again from the beginning.
To cancel this mode, press again.
Playing a CrO2or Metal tape
Press (4) when you want to listen to a
CrO2(TYPE II) or metal (TYPE IV) tape.
“METAL” appears on the display.
To cancel this mode, press (4).
Switching to the radio while fast-
winding a tape
— Automatic Tuner Activation (ATA)
Press (5) during playback.
“ATA” appears on the display.
When fast-forwarding or rewinding with
(SEEK/AMS), the tuner will turn on
automatically.
To cancel this mode, press (5).
Skipping blanks during tape
playback — Blank skip
Press (6) during playback.
“BL.SKIP” appears on the display.
Blanks longer than eight seconds will
automatically be skipped during tape
playback.
To cancel this mode, press (6).
Locating the beginning of a track
— Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS) momentarily.
Note
The AMS function may not work when :
• the blanks between tracks are shorter than 4 seconds
• there is noise between tracks
• there are long sections of low volume or quiet sections.
Changing the displayed items
Each time you press (DSPL) momentarilly
during tape playback, the displayed item
changes as follows:
Tape playback ˜Frequency*
*While the ATA function is activated.

5
Actual total number: Sony XR-2753 (E,Pl,Bg,Hu,R) 3-859-732-22(1)
EN
Cassette Player/Radio
Memorising only the
desired stations
Up to 6 stations on each band (FM1, FM2, FM3,
MW and LW) can be stored on the preset
number buttons in the order of your choice.
Therefore, 18 FM stations can be memorised.
If you try to store another station on the same
preset number button, the previously stored
station will be erased.
1Press (SOURCE) repeatedly to select the
tuner.
2Press (MODE) repeatedly to select the
band.
3Press (SEEK/AMS) to search for the
station you wish to store on a preset
number button.
4Press the desired preset number button
((1) to (6)) for two seconds.
The number of the selected preset number
button appears on the display.
Radio
Memorising stations
automatically
— Best Tuning Memory (BTM)
This function selects from the currently
received band the stations with the strongest
signals and memorises them in order of their
frequency.
PREVENTING ACCIDENTS!
When tuning in while driving, use the
automatic tuning or memory preset search
function instead of manual tuning.
1Press (SOURCE) repeatedly to select the
tuner.
Each time you press (SOURCE), the source
changes as follows:
TAPE ˜TUNER
2Press (MODE) repeatedly to select the
band.
Each time you press (MODE), the band
changes as follows:
FM1 nFM2 nFM3 nMW nLW
3Press (BTM) for two seconds.
Notes
• The unit will not store stations with weak signals on the
preset number buttons. If there are only a few stations
received, some preset number buttons will remain empty.
• When there is a preset number indicated on the display,
the unit will store stations on all preset number buttons
from the one currently displayed.

6
Actual total number: Sony XR-2753 (E,Pl,Bg,Hu,R) 3-859-732-22(1)
EN
Receiving the memorised
stations
1Press (SOURCE) repeatedly to select the
tuner.
2Press (MODE) repeatedly to select the
band.
3Press the preset number button ((1) to
(6)) momentarily on which the desired
station is stored.
If you cannot tune in a preset
station
Press either side of (SEEK/AMS)
momentarily to search for the station
(automatic tuning).
Scanning stops when a station is received.
Press either side of the button repeatedly
until the desired station is received.
Note
If the automatic tuning stops too frequently, press
(LCL) momentarily to lights up “LCL” on the display
(local seek mode). Only the stations with relatively strong
signals can be tuned in.
Tip
If you know the frequency, press and hold either side of
(SEEK/AMS) until the desired station is received (manual
tuning).
Other Functions
Adjusting the sound
characteristics
1Select the item you want to adjust by
pressing (SEL) repeatedly.
VOL (volume) nBAS (bass) nTRE
(treble) nBAL (balance) nFAD (fader)
2Adjust the selected item by pressing
either (+) or (–).
Adjust within three seconds after selecting.
(After three seconds the button will again
serve as the volume control button.)
Muting the sound
Press (MUTE).
The “MUTE” indication flashes.
To restore the previous volume level, press
again.

7
Actual total number: Sony XR-2753 (E,Pl,Bg,Hu,R) 3-859-732-22(1)
EN
Changing the sound and
beep tone
Boosting the bass sound — D-Bass
You can enjoy clear and powerful bass sound.
The D-bass function boosts the low frequency
singal with a sharper curve than conventional
bass boost.
You can hear the bass line more clearly even if
the vocal sound is the same volume. You can
emphasize and adjust the bass sound easily
with the D-bass control. This effect is similar to
the one you get when you use an optional
subwoofer system.
Adjusting the bass curve
Turn the D-BASS control to adjust the
bass level (1, 2 or 3).
“D-BASS” appears in the display.
To cancel, turn the control to the OFF position.
Muting the beep tone
Press (6) while pressing (SEL).
To obtain the beep tone again, press these
buttons once more.
Frequency (Hz)
Analog D-BASS
Level
0dB
D-BASS 3
D-BASS 2
D-BASS 1
Additional
Information
Precautions
•If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before operating it.
•If no power is being supplied to the unit,
check the connections first. If everything is in
order, check the fuse.
•If no sound comes from the speakers of a
2-speaker system, set the fader control to the
centre position.
•When the tape is played back for a long
period, the cassette may become warm
because of the built-in power amplifier.
However, this is not a sign of malfunction.
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.
To maintain high quality sound
If you have drink holders near your audio
equipment, be careful not to splash juice or
other soft drinks onto the car audio. Sugary
residues on this unit or cassette tapes may
contaminate the playback heads, reduce the
sound quality, or prevent sound reproduction
altogether.
Cassette cleaning kits cannot remove sugar
from the tape heads.
Radio/Other Functions/Additional Information

8
Actual total number: Sony XR-2753 (E,Pl,Bg,Hu,R) 3-859-732-22(1)
EN
Notes on Cassettes
Cassette care
•Do not touch the tape surface of a cassette, as
any dirt or dust will contaminate the heads.
•Keep cassettes away from equipment with
built-in magnets such as speakers and
amplifiers, as erasure or distortion on the
recorded tape could occur.
•Do not expose cassettes to direct sunlight,
extremely cold temperatures or moisture.
•Slack in the tape may cause the tape to be
caught in the machine. Before you insert the
tape, use a pencil or similar object to turn the
reel and take up any slack.
•Distorted cassettes and loose labels can cause
problems when inserting or ejecting tapes.
Remove or replace loose labels.
Cassettes longer than 90 minutes
The use of cassettes longer than 90 minutes is
not recommended except for long continuous
play. The tapes used for these cassettes are
very thin and tend to be stretched easily.
Frequent playing and stopping of these tapes
may cause them to be pulled into the cassette
deck mechanism.
Slack
Maintenance
Fuse Replacement
When replacing the fuse, be sure to use one
with the correct amperage which is stated on
the fuse case. Never use a fuse whose
amperage rating exceeds the one supplied to
the unit as this could cause a malfunction of
the unit.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
this could damage the unit.
Removing the unit
To prevent the unit from being stolen
When you leave your car, remove the unit
from the bracket and take it away with you.
Caution
Be careful when you remove the unit. The rear
of the unit becomes very hot just after
operating it because of a built-in power
amplifier.

9
Actual total number: Sony XR-2753 (E,Pl,Bg,Hu,R) 3-859-732-22(1)
EN
Additional Information
The rotary remote labels
You can control this unit with the optional
rotary remote (RM-X2S).
Some labels are supplied with the rotary
remote. Attach that label which matches the
functions of the master unit and the mounting
position of the rotary remote.
When you mount the rotary remote, attach the
label in the illustration below.
SEL
DSPL
MODE
SEL
DSPL
MODE

10
Actual total number: Sony XR-2753 (E,Pl,Bg,Hu,R) 3-859-732-22(1)
EN
Location of controls
Refer to the pages for further details.
1SEEK/AMS button 3, 4, 5, 6
2SOURCE button (TAPE/TUNER) 3, 5, 6
3(+)(–) (volume/bass/treble/balance/
fader control) button 6
4MODE (*) button
During tuner reception:
BAND select 5, 6
During tape playback:
Transport direction change 3
5OFF button 3
66(eject) button 3
7During radio reception:
Preset number buttons 5, 6
During tape playback:
(1) INTRO button 4
(2) REPEAT button 4
(4) METAL button 4
(5) ATA (Automatic Tuner
Activation) button 4
(6) BL.SKIP (Blank Skip) button 4
8Reset button 3
Press this button when you use this unit
for the first time, when you have changed
the car battery, or when the buttons of this
unit do not function properly.
9MUTE button 6
0SEL (control mode select) button 6, 7
!¡ Display window
!™ BTM (Best tuning memory) button 5
!£ DSPL (display mode change) button 4
!¢ LCL button 6
!∞ D-BASS control 6
D-BASS
MODE
SEEK
AMS SEL
SOURCE
MUTE
OFF
213
546
INTRO REPEAT
ATA BL.SKIP
BTM LCL
OFF
123
DSPL
METAL