Sony XS-F6920SL User manual

XS-F6920SL
Sony Corporation 2000 Printed in China
Instructions
Dimensions
Precautions
•Do not continuously drive the speaker system over the power handling capacity.
•Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the
speaker system to protect them from damage caused by the magnets in the speakers.
If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony
dealer before mounting.
Specifications
Speaker Coaxial 2-way:
Woofer 16 ×24 cm, polypropylene cone type
Tweeter 3.5 cm,
PEI, balance dome type
Maximum input power 160 W
Rated input power 40 W
Impedance 4 ohms
Sensitivity 90 dB/W/m
Frequency response 30 – 30,000 Hz
Mass Approx. 1,065 g per speaker
Design and specifications are subject to change without notice. 16 ×24cm Coaxial
2-way Speaker
Unit: mm *Mounting depth
244
26
118
216.5
ø90
166
164
235.8
148.5
74.5*
3-046-194-11 (1)
4 - 5.5 ×9.5
12.6

Mounting
Parts List
Mounting example
4
×8
2
×2
3
×8
M4 ×30
2
1Mark the four bolt holes. Make them 3.3 mm*in diameter for Aor 4.3 mm in
diameter for B.
*When using 5= 5 mm
Remove the grille net.
5
×8
6
×8
M4 ×60
M4
3
4AA
AA
A
Speaker
Rear deck
*White cord — Left speaker
Grey cord — Right speaker
3
2*
Black-striped cord
5Press and insert the edges of the grille net.
How to remove the grille net
c
1
BB
BB
B
5
Mounting from the car interior
(Top mounting)
Power amplifier, etc.
78
Before Mounting
•A depth of at least 74.5 mm is required for
mounting the woofer. Keep the following in mind
when choosing a mounting location.
•A hole may already be provided in the metal
frame of the front door.
•Make sure that the speaker does not hinder the
movement of torsion bar springs, etc. of the trunk
lid.
•The speaker should not touch the window or the
seat.
If you cannot find an appropriate mounting
location, check with your car dealer or consult
the nearest Sony dealer.
ø150.5 mm
218.5 mm
8
7
7
1
5 m
×2 ×2
4
Speaker
6
Mounting from the trunk
(Buttom mounting)
8
7
7
Rear deck
Metal partition
A: ø3.3*
B: ø4.3
8
7