Sony Dsc-rx0m2 User manual

SERVICE MANUAL (LEVEL 2)

1st Edition (Revised 1)

DIGITAL STILL CAMERA

DSC-RX0M2

DSC-RX0M2G

Conditions of Use:

(1) Please use this information only for the purpose of performing repair, maintenance and/or configuration services of the Sony products

(hereinafter the “Repair services”) under the service agreement entered into with the Sony group company (hereinafter the “Service

agreement”). Using this information for any purpose other than the purpose described foregoing is forbidden.

(2) Only the Authorized Servicer’s officers, employees or subcontractors (including their officers and employees) whose duties justify

a need-to-know and who have agreed to hold confidential this information (collectively hereinafter the ”Permitted users”) are permitted

to access and use this information. To disclose or disseminate to any person other than the Permitted users is forbidden.

(3) Destroy or erase any and all portion of this information promptly in an irrecoverable and secure fashion after achieving the purpose

described in Section (1) above.

(4) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part without the prior

written permission of the author.

(Notwithstanding foregoing, it is permitted to copy and distribute this information to the Permitted users.)

(5)

Please notify immediately any leakage, loss, theft, misappropriation, or other misuse of this information by e-mail to the following address:

somk-gcs-tissnexim-adm@jp.sony.com

(6) In addition to the above, the terms and conditions of the Service agreement shall be applied to using this information.

Revision of Information:

This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-to-date before using it.

利用条件:　

①

本情報はソニー製品の修理その他貴社と締結した業務委託契約に基づくサービス業務（以下「本サービス業務」）の遂行の

目的でのみご利用ください。かかる目的以外での利用を禁止します。

②

本情報は、本サービス業務の遂行に必要でかつソニーグループに対して直接もしくは間接的に機密保持義務を負う者のみ

閲覧・利用が可能です。これらの者以外への開示／漏えいを禁止します。

③

サービス業務の終了その他本情報の利用終了後は、本情報を速やかに再生不可能な形で消去/廃棄してください。

④

著作者の事前の書面による許可なく、本情報の全部または一部の複写、複製、転載、改変、翻訳、送信その他の処分することを

禁止します。（但し、本サービス業務の遂行に必要な範囲で担当者に複写・配布することはこの限りではありません）

⑤

本情報の漏えい、紛失、盗難、盗用等の不正使用を発見された方は直ちに、下記までご連絡ください。

[email protected]

⑥

上記の他、貴社と締結した業務委託契約の条項が適用されます。

情報改訂:

本情報は、当社の裁量により、予告なく変更されることがあります。業務にて使用する場合、本情報が最新の情報であることを

確認のうえ、ご使用ください。

Sony CONFIDENTIAL

For Authorized Servicer

SYSSET

2019/05/1501:58:50(GMT+09:00)

1(P)

警告

このマニュアルは，サービス専用です。

お客様が，このマニュアルに記載された設置や保守，点検，修理などを行うと感電や火災，

人身事故につながることがあります。

危険をさけるため，サービストレーニングを受けた技術者のみご使用ください。

WARNING

This manual is intended for qualiﬁed service personnel only.

To reduce the risk of electric shock, ﬁre or injury, do not perform any servicing other than that

contained in the operating instructions unless you are qualiﬁed to do so. Refer all servicing to

qualiﬁed service personnel.

WARNUNG

Die Anleitung ist nur für qualiﬁziertes Fachpersonal bestimmt.

Alle Wartungsarbeiten dürfen nur von qualiﬁziertem Fachpersonal ausgeführt werden. Um die

Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei

Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben

Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung

dazu besitzen.

AVERTISSEMENT

Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Aﬁn

de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les

réparations indiquées dans le mode d’emploi à moins d’être qualiﬁépour en effectuer d’autres.

Pour toute réparation faire appel à une personne compétente uniquement.

Sony CONFIDENTIAL

For Authorized Servicer

SYSSET

2019/05/1501:58:50(GMT+09:00)

2(P)

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type rec-

ommended by the manufacturer.

When you dispose of the battery, you must obey the

law in the relative area or country.

ATTENTION

Il y a danger d’explosion s’il y a remplacement incor-

rect de la batterie. Remplacer uniquement avec

une batterie du même type ou d’un type équivalent

recommandé par le constructeur.

Lorsque vous mettez la batterie au rebut, vous devez

respecter la législation en vigueur dans le pays ou la

région où vous vous trouvez.

VORSICHT

Explosionsgefahr bei Verwendung falscher Batterien.

Batterien nur durch den vom Hersteller empfohlenen

oder einen gleichwertigen Typ ersetzen.

Wenn Sie die Batterie entsorgen, müssen Sie die

Gesetze der jeweiligen Region und des jeweiligen

Landes befolgen.

注意

指定以外の電池に交換すると，破裂する危険があります。

必ず指定の電池に交換してください。

使用済みの電池は，国または地域の法令に従って

処理してください。

FÖRSIKTIGHET!

Fara för explosion vid felaktigt placerat batteri.

Byt endast mot samma eller likvärdig typ av batteri,

enligt tillverkarens rekommendationer.

När du kasserar batteriet ska du följa rådande lagar

för regionen eller landet.

PAS PÅ

Fare for eksplosion, hvis batteriet ikke udskiftes

korrekt.

Udskift kun med et batteri af samme eller tilsvarende

type, som er anbefalet af fabrikanten.

Når du bortskaffer batteriet, skal du følge

lovgivningen i det pågældende område eller land.

HUOMIO

Räjähdysvaara, jos akku vaihdetaan virheellisesti.

Vaihda vain samanlaiseen tai vastaavantyyppiseen,

valmistajan suosittelemaan akkuun.

Noudata akun hävittämisessä oman maasi tai

alueesi lakeja.

FORSIKTIG

Eksplosjonsfare hvis feil type batteri settes i.

Bytt ut kun med samme type eller tilsvarende

anbefalt av produsenten.

Kasser batteriet i henhold til gjeldende avfallsregler.

注意

如果更换的电池不正确，就会有爆炸的危险。

只更换同一类型或制造商推荐的电池型号。

处理电池时，必须遵守相关地区或国家的法律。

Note:

Be sure to keep your PC used for service and checking of this

unit always updated with the latest version of your anti-virus

software. In case a virus affected unit was found during service,

contact your Service Headquarters.

注意：

修理時に使用するパソコンは，ウィルス検出ソフトが常にアッ

プデートを行っているパソコンを使用してください。もし，修

理を行うセット，もしくはパソコンがウィルスに感染している

事が判明した場合は，ソニーグループ内は社内技術相談窓口に，

特約店様は特約店様専用電話窓口（修理窓口）にご相談くださ

い。

Sony CONFIDENTIAL

For Authorized Servicer

SYSSET

2019/05/1501:58:50(GMT+09:00)

3(P)

SAFETY-RELATED COMPONENT WARNING!! ATTENTIONAU COMPOSANT AYANT RAPPORT

À LASÉCURITÉ!

: LEAD FREE MARK

Be careful to the following points to solder or unsolder.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

1. Check the area of your repair for unsoldered or poorly-soldered

connections. Check the entire board surface for solder splashes

and bridges.

2. Check the interboard wiring to ensure that no wires are “pinched”

or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularly transistors,

that were installed during a previous repair. Point them out to the

customer and recommend their replacement.

4. Look for parts which, through functioning, show obvious signs

of deterioration. Point them out to the customer and recommend

their replacement.

5. Check the B+ voltage to see it is at the values specified.

6. Flexible Circuit Board Repairing

•Set the soldering iron tip temperature to 350 °C approximately.

•Do not touch the soldering iron on the same conductor of the

circuit board (within 3 times).

•Be careful not to apply force on the conductor when soldering

or unsoldering.

COMPONENTS IDENTIFIED BYMARK 0OR DOTTED LINE WITH

MARK 0ON THE SCHEMATIC DIAGRAMSAND IN THEPARTS

LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE

COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS

APPEAR AS SHOWN IN THIS MANUALOR IN SUPPLEMENTS

PUBLISHED BYSONY.

UNLEADED SOLDER

This unit uses unleaded solder.

Boards requiring use of unleaded solder are printed with the lead free

mark (LF) indicating the solder contains no lead.

(Caution: Some printed circuit boards may not come printed with

the lead free mark due to their particular size.)

•Set the soldering iron tip temperature to 350 °C approximately.

If cannot control temperature, solder/unsolder at high temperature

for a short time.

Caution:The printed pattern (copper foil) may peel away if the

heated tip is applied for too long, so be careful!

Unleaded solder is more viscous (sticky, less prone to

flow) than ordinary solder so use caution not to let solder

bridges occur such as on IC pins, etc.

•Be sure to control soldering iron tips used for unleaded solder and

those for leaded solder so they are managed separately. Mixing un-

leaded solder and leaded solder will cause detachment phenomenon.

LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0SUR LES

DIAGRAMMES SCHÉMATIQUES ET LA LISTEDES PIÈCES SONT

CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE

REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY

DONT LES NUMÉROS SONT DONNÉS DANS CE MANUELOU

DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.

Sony CONFIDENTIAL

For Authorized Servicer

SYSSET

2019/05/1501:58:50(GMT+09:00)

4(P)

サービス，点検時には次のことにご注意ください。

：レッドフリーマーク

無鉛半田は，下記の点に注意して使用してください。

1. 注意事項をお守りください。

サービスのとき特に注意を要する個所については，キャ

ビネット，シャーシ，部品などにラベルや捺印で注意事

項を表示しています。これらの注意書き及び取扱説明書

等の注意事項を必ずお守り下さい。

2. 指定部品のご使用を

セットの部品は難燃性や耐電圧など安全上の特性を持っ

たものとなっています。従って交換部品は，使用されて

いたものと同じ特性の部品を使用して下さい。特に回路

図，部品表に0印で指定されている安全上重要な部品は

必ず指定のものをご使用下さい。

3. 部品の取付けや配線の引きまわしはもとどおりに

安全上，チューブやテープなどの絶縁材料を使用したり

，プリント基板から浮かして取付けた部品があります。

また内部配線は引きまわしやクランパによって発熱部品

や高圧部品に接近しないよう配慮されていますので，こ

れらは必ずもとどおりにして下さい。

4. サービス後は安全点検を

サービスのために取外したネジ，部品，配線がもとどお

りになっているか，またサービスした個所の周辺を劣化

させてしまったところがないかなどを点検し，安全性が

確保されていることを確認して下さい。

5. チップ部品交換時の注意

・取外した部品は再使用しないで下さい。

・タンタルコンデンサのマイナス側は熱に弱いため交

換時は注意して下さい。

6. フレキシブルプリント基板の取扱いについて

・半田こてのこて先温度は約350℃に設定してくださ

い。

・同一パターンに何度もコテ先を当てないで下さい。

（3回以内）

・パターンに力が加わらないよう注意して下さい。

無鉛半田について

本機には無鉛半田が使用されています。

無鉛半田を使用している基板には，無鉛（Lead Free）を意味

するレッドフリーマークがプリントされています。

（注意：基板サイズによっては，無鉛半田を使用していても

レッドフリーマークがプリントされていないものが

あります）

・半田こてのこて先温度は約350℃に設定してください。

温度調節が無理な場合は，高温短時間で作業を行ってくだ

さい。

注意：半田こてを長く当てすぎると，基板のパターン（銅

箔）がはがれてしまうことがありますので，注意して

ください。また，従来の半田よりも粘性が強いため，

IC端子などが半田ブリッジしないように注意してく

ださい。

・半田こてのこて先は，必ず無鉛半田用と有鉛半田用に分け

て管理してください。

無鉛半田と有鉛半田が混在すると剥離現象が発生してしま

います。

Sony CONFIDENTIAL

For Authorized Servicer

SYSSET

2019/05/1501:58:50(GMT+09:00)

5(P)

Specifications

Camera

[System]

Camera Type

Digital Still Camera

[Image sensor]

Image format

1.0 type (13.2 mm × 8.8 mm),

Exmor RS CMOS image

sensor

Effective pixel number

of camera

Approx. 15 300 000 pixels

Total pixel number

of camera:

Approx. 21 000 000 pixels

[Lens]

ZEISS Tessar T＊

f=7.7 mm

Angle of View: 84° (35 mm

format equivalent: 24 mm)

F4.0

[SteadyShot]

System

Electronic

[Auto focus system]

Detection system

Contrast detection system

[Monitor]

LCD monitor

3.8 cm (1.5 type)

Total number of dots

230 400 dots

[Recording format]

File format

JPEG (DCF Ver.2.0, Exif Ver.2.31,

MPF Baseline) compliant,

RAW (SonyARW 2.3 format）

Movie (XAVC S format)

MPEG-4 AVC/H.264 XAVC S ver.1.0 format

compliant

Video: MPEG-4AVC/H.264

Audio: LPCM 2ch (48kHz 16bit)

Movie (AVCHD format)

AVCHD format Ver. 2.0 compatible

Video: MPEG-4AVC/H.264

Audio: Dolby Digital 2ch, equipped with

Dolby Digital Stereo Creator

・Manufactured under license from Dolby

Laboratories.

[Recording media]

Memory Stick Micro media, microSD memory

cards

[Input/output terminals]

Multi/Micro USB Terminal*

Hi-Speed USB (USB 2.0)

*Supports Micro USB compatible devices.

HDMI

HDMI type D micro jack

[Power, general]

Model No.

WW151602

Rated input

3.7 V

Operating temperature

0 to 40°C (32 to 104°F)

, 1.3 W

Storage temperature

–20 to 55°C (–4 to 131°F)

Dimensions (W/H/D) (Approx.)

59.0 × 40.5 × 35.0 mm

(2 3/8 × 1 5/8 × 1 7/16 in.)

Mass (Approx.)

132 g (4.7 oz)

(including battery pack,

microSD memory card)

[Wireless LAN]

Supported format

IEEE 802.11 b/g/n

Frequency band

2.4 GHz

Security

WEP/WPA-PSK/WPA2-PSK

Connection method

Wi-Fi Protected Setup™（WPS）/Manual

Access method

Infrastructure mode

[Bluetooth communications]

Bluetooth standardVer. 4.1

Frequency band

2.4 GHz

AC AdaptorAC-UUD12/AC-UUE12

Rated input

100‐240 V

Rated output

5 V

Rechargeable battery pack NP-BJ1

Rated voltage

3.7 V

Design and specifications are subject to

change without notice.

, 50/60 Hz, 0.2A

, 1.5A

Sony CONFIDENTIAL

For Authorized Servicer

SYSSET

2019/05/1501:58:50(GMT+09:00)

6(P)

概略仕様

本体

［形式］

カメラタイプ

デジタルスチルカメラ

［撮像部］

撮像素子

1.0型(13.2mm × 8.8mm)

Exmor RS CMOSセンサー

カメラ有効画素数

約1530万画素

総画素数

約2100万画素

［レンズ］

ZEISSテッサーT＊

f=7.7 mm（画角84°

（35 mm判相当24 mm））、F4.0

［手ブレ補正］

形式

電子式

［オートフォーカス］

検出方式

コントラスト検出方式

［モニター］

液晶モニター

3.8 cm（1.5型）

ドット数

230 400ドット

［記録方式］

静止画記録方式

JPEG（DCF Ver.2.0、Exif Ver.2.31、

MPF Baseline）準拠、

RAW（ソニーARW 2.3フォーマット）

動画記録方式（XAVC S方式）

MPEG-4 AVC/H.264 XAVC S ver.1.0規格準拠

映像：MPEG-4 AVC/H.264

音声：LPCM 2ch（48kHz 16bit）

動画記録方式（AVCHD方式）

AVCHD規格 Ver2.0準拠

映像：MPEG-4 AVC/H.264

音声：Dolby Digital 2chドルビーデジタル

ステレオクリエーター搭載

・ドルビーラボラトリーズからの実施権に基づき

製造されています。

［記録メディア］

メモリースティックマイクロ、microSD カード

［入/出力端子］

マルチ/マイクロUSB端子*

USB通信 Hi-Speed USB（USB 2.0）

*この端子にはマイクロUSB規格に対応した

機器をつなぐことができます。

HDMI端子

HDMIタイプD マイクロ端子

［電源・その他］

Model No. WW151602

定格

3.7 V

動作温度

0～40℃

、1.3 W

保存温度

－20～55℃

外形寸法（幅×高さ×奥行き）（約）

59.0×40.5×35.0 mm

質量

約132 g（バッテリー、microSDカードを含む）

［ワイヤレスLAN］

対応規格

IEEE 802.11 b/g/n

使用周波数帯

2.4 GHz帯

セキュリティ

WEP/WPA-PSK/WPA2-PSK

接続方式

Wi-Fi Protected Setup™（WPS）/マニュアル

アクセス方式

インフラストラクチャーモード

［Bluetooth通信］

Bluetooth標準規格Ver. 4.1

使用周波数帯

2.4 GHz帯

ACアダプターAC-UUD12

定格入力

100‐240 V

定格出力

5 V

リチャージャブルバッテリーパック NP-BJ1

定格

3.7 V

本機や付属品の仕様および外観は、

改良のため予告なく変更することが

ありますが、ご了承ください。

、50/60 Hz、0.2 A

、1.5 A

Sony CONFIDENTIAL

For Authorized Servicer

SYSSET

2019/05/1501:58:50(GMT+09:00)

7(P)

Model Information

Model

DSC-RX0M2

DSC-RX0M2G

Destination

UC2, KR2, J1

CEE, E35, CN1, HK1,

IN5

CEE, E35, CN1, HK1

Color

system

NTSC

PAL

GPS

Wi-Fi

✓

✓✓

NFC

[About the service of this model]

DSC-RX0M2G is commodity that packed the Digital Still Camera and Accessory.

Refer to each following service manual of the Accessory, when you repair.

Model

Accessory

Service Manual of Accessory

DSC-RX0M2

No supplied

DSC-RX0M2G

VCT-SGR1

9-896-849-[][]

Sony CONFIDENTIAL

For Authorized Servicer

SYSSET

2019/05/1501:58:50(GMT+09:00)

Table of Contents

Manual Structure.....................................................................................................................................................................................3

Purpose of this manual.........................................................................................................................................................................3

Related manuals...................................................................................................................................................................................3

Section 1 Trouble Shooting ..................................................................................................................................................................7

1-1. Self-diagnosis Function ................................................................................................................................................................7

1-1-1. Self-diagnosis Function..........................................................................................................................................................7

1-1-2. Note on the Function of Boards .............................................................................................................................................7

1-1-3. Self-diagnosis Code Table......................................................................................................................................................7

Section 2 Service Note .........................................................................................................................................................................9

2-1. Operation Notes............................................................................................................................................................................9

2-1-1. Flexible Board........................................................................................................................................................................9

2-1-2. Fine-Wire Coaxial Cable........................................................................................................................................................9

2-2. Precaution on Replacing the SY-1095 Board..............................................................................................................................10

2-2-1. Destination Data...................................................................................................................................................................10

2-2-2. Restore Data.........................................................................................................................................................................10

2-2-3. USB Serial No. and Product ID ...........................................................................................................................................10

2-2-4. Update of MAC Address......................................................................................................................................................10

2-3. Notes on Replacing the Lens ......................................................................................................................................................11

2-3-1. Selection of Spacer Plate when Mounting the Imager Board...............................................................................................11

2-3-2. Adjustment after Replacing the Lens ...................................................................................................................................11

2-4. Notes on Removing/Installing the Imager Board (CD-1008 Flexible Board).............................................................................12

2-5. Checking the Wi-Fi Function......................................................................................................................................................13

2-6. Water-Proof, Dust-Proof, and Shock-Proof.................................................................................................................................14

2-6-1. Water-proof, Dust-proof, and Shock-proof Performance .....................................................................................................14

2-6-2. Regarding the Positions of Water-proof Treatment ..............................................................................................................16

2-7. Servicing Flow............................................................................................................................................................................17

2-8. Water-Proof Inspection Tool.......................................................................................................................................................19

2-8-1. Water-Proof Inspection Tool ................................................................................................................................................19

2-8-2. Assembly of Air-leak Tester (Compressor type)...................................................................................................................20

2-8-3. Assembly of Air-leak Tester (Hand Pump Type)..................................................................................................................20

2-8-4. Operation of Pressure Indicator............................................................................................................................................21

2-8-5. The Switch ofAir-leak Tester (Compressor Type)...............................................................................................................21

2-9. Air-Leak Test ..............................................................................................................................................................................22

2-9-1. Inspection Procedure (Compressor Type) ............................................................................................................................22

2-9-2. Inspection Procedure (Hand Pump Type).............................................................................................................................26

2-9-3. Actions to Be Taken when Inspection Resulted in Failure...................................................................................................31

2-10. Periodic Maintenance ...............................................................................................................................................................32

2-10-1. Periodic Maintenance.........................................................................................................................................................32

Section 3 Adjustment..........................................................................................................................................................................33

Section 4 Replacement of Main Parts.................................................................................................................................................61

4-1. Disassembly Flow.......................................................................................................................................................................61

4-2. Disassembly................................................................................................................................................................................63

4-2-1. Cover (F)..............................................................................................................................................................................63

4-2-2. Water sheet inspection..........................................................................................................................................................64

4-2-3. Lid JK ..................................................................................................................................................................................65

4-2-4. BT packing...........................................................................................................................................................................66

4-2-5. Inner F..................................................................................................................................................................................67

4-2-6. Microphone Holder Assy .....................................................................................................................................................68

4-2-7. BT-2023 Board.....................................................................................................................................................................70

4-2-8. SW-1032 Flexible Board......................................................................................................................................................73

4-2-9. Tripod Washer Packing ........................................................................................................................................................76

4-2-10. Device (LSV-1910B)..........................................................................................................................................................77

4-2-11. FP Retainer BD (64010).....................................................................................................................................................79

4-2-12. LCD Block Assy (64010)...................................................................................................................................................80

4-2-13. SY-1095 Board...................................................................................................................................................................84

4-2-14. Radiation Sheet FP R (64010)............................................................................................................................................85

4-2-15. Magnet (ND 7.9X2.9X1.2) ................................................................................................................................................86

Section 5 Repair Parts List .................................................................................................................................................................88

5-1. Note on Repair Parts...................................................................................................................................................................88

5-2. Exploded Views..........................................................................................................................................................................89

Cover (F) Assy................................................................................................................................................................................89

Overall Section-1............................................................................................................................................................................90

Overall Section-2............................................................................................................................................................................91

Sony CONFIDENTIAL

For Authorized Servicer

SYSSET

2019/05/1501:58:50(GMT+09:00)

Overall Section-3............................................................................................................................................................................92

LCD Block .....................................................................................................................................................................................93

SY-1095 Block................................................................................................................................................................................94

Lens Device (LSV-1910B) .............................................................................................................................................................95

5-3. Accessories .................................................................................................................................................................................97

Revision History....................................................................................................................................................................................98

Sony CONFIDENTIAL

For Authorized Servicer

SYSSET

2019/05/1501:58:50(GMT+09:00)

Manual Structure

Purpose of this manual

This manual describes the information items that premise the service based on the components parts assuming use of system and

service engineers.

Related manuals

Besides this manual, the following manuals are available.

• Startup Guide (Supplied with this unit)

• Help Guide (Web manual)

Refer to “Help Guide” for in-depth instructions on the many functions of the camera.

• Adjust Manual (Available on request)

The adjustment software is necessary for adjustment and various checking of this unit for the service.

Sony CONFIDENTIAL

For Authorized Servicer

SYSSET

2019/05/1501:58:50(GMT+09:00)

このマニュアルについて .........................................................................................................................................................................6

本書の目的..........................................................................................................................................................................................6

関連マニュアル....................................................................................................................................................................................6

第1章トラブルシューティング ..........................................................................................................................................................34

1-1. 自己診断機能 ...........................................................................................................................................................................34

1-1-1. 自己診断機能について......................................................................................................................................................34

1-1-2. 基板について .....................................................................................................................................................................34

1-1-3. 自己診断コード表...............................................................................................................................................................34

第2章サービスノート........................................................................................................................................................................36

2-1. 作業時の注意............................................................................................................................................................................36

2-1-1. フレキシブル基板 ...............................................................................................................................................................36

2-1-2. 細線ケーブル .....................................................................................................................................................................36

2-2. SY-1095 基板交換時の注意.....................................................................................................................................................37

2-2-1. 仕向データ .........................................................................................................................................................................37

2-2-2. リストアデータ......................................................................................................................................................................37

2-2-3. USB シリアルナンバーとプロダクト ID について...............................................................................................................37

2-2-4. MAC アドレスの更新..........................................................................................................................................................37

2-3. レンズ交換時の注意 .................................................................................................................................................................38

2-3-1. イメージャ基板取り付け時のあおり板の選択.....................................................................................................................38

2-3-2. 交換終了後の調整時.........................................................................................................................................................38

2-4. イメージャ基板（CD-1008 フレキシブル基板）の取り外し／取り付け時の注意 ......................................................................39

2-5. Wi-Fi 接続確認.........................................................................................................................................................................40

2-6. 防水／防塵・耐衝撃 .................................................................................................................................................................41

2-6-1. 防水／防塵・耐衝撃性能...................................................................................................................................................41

2-6-2. 防水箇所について .............................................................................................................................................................43

2-7. 修理フロー.................................................................................................................................................................................44

2-8. 防水検査治具 ...........................................................................................................................................................................46

2-8-1. 防水検査治具.....................................................................................................................................................................46

2-8-2. エアリークテスター（コンプレッサー式）の組み立て...........................................................................................................47

2-8-3. エアリークテスター（ハンドポンプ式）の組み立て..............................................................................................................47

2-8-4. 圧力計の操作方法.............................................................................................................................................................48

2-8-5. エアリークテスター（コンプレッサー式）のスイッチ .............................................................................................................48

2-9. エアリークテスト .........................................................................................................................................................................49

2-9-1. 検査手順（コンプレッサー式） ............................................................................................................................................49

2-9-2. 検査手順（ハンドポンプ式）................................................................................................................................................53

2-9-3. 検査結果 NG となった場合...............................................................................................................................................58

2-10. 定期メンテナンス.....................................................................................................................................................................59

2-10-1. 定期メンテナンス ..............................................................................................................................................................59

第3章調整について........................................................................................................................................................................60