Sony ZV-1 User manual

SERVICE MANUAL (LEVEL 2)
1st Edition
DIGITAL CAMERA
ZV-1
Conditions of Use:
(1) Please use this information only for the purpose of performing repair, maintenance and/or configuration services of the Sony products
(hereinafter the “Repair services”) under the service agreement entered into with the Sony group company (hereinafter the “Service
agreement”). Using this information for any purpose other than the purpose described foregoing is forbidden.
(2) Only the Authorized Servicer’s officers, employees or subcontractors (including their officers and employees) whose duties justify
a need-to-know and who have agreed to hold confidential this information (collectively hereinafter the ”Permitted users”) are permitted
to access and use this information. To disclose or disseminate to any person other than the Permitted users is forbidden.
(3) Destroy or erase any and all portion of this information promptly in an irrecoverable and secure fashion after achieving the purpose
described in Section (1) above.
(4) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this information in whole or in part without the prior
written permission of the author.
(Notwithstanding foregoing, it is permitted to copy and distribute this information to the Permitted users.)
(5)
Please notify immediately any leakage, loss, theft, misappropriation, or other misuse of this information by e-mail to the following address:
[e-mail]
(6) In addition to the above, the terms and conditions of the Service agreement shall be applied to using this information.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please confirm that this information is up-to-date before using it.
利用条件:
①
本情報はソニー製品の修理その他貴社と締結した業務委託契約に基づくサービス業務（以下「本サービス業務」）の遂行の
目的でのみご利用ください。かかる目的以外での利用を禁止します。
② 本情報は、本サービス業務の遂行に必要でかつソニーグループに対して直接もしくは間接的に機密保持義務を負う者のみ
閲覧・利用が可能です。これらの者以外への開示／漏えいを禁止します。
③
サービス業務の終了その他本情報の利用終了後は、本情報を速やかに再生不可能な形で消去/廃棄してください。
④ 著作者の事前の書面による許可なく、本情報の全部または一部の複写、複製、転載、改変、翻訳、送信その他の処分することを
禁止します。（但し、本サービス業務の遂行に必要な範囲で担当者に複写・配布することはこの限りではありません）
⑤
本情報の漏えい、紛失、盗難、盗用等の不正使用を発見された方は直ちに、下記までご連絡ください。
[email protected]
⑥ 上記の他、貴社と締結した業務委託契約の条項が適用されます。
情報改訂:
本情報は、当社の裁量により、予告なく変更されることがあります。業務にて使用する場合、本情報が最新の情報であることを
確認のうえ、ご使用ください。
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

1(P)
警告
このマニュアルは，サービス専用です。
お客様が，このマニュアルに記載された設置や保守，点検，修理などを行うと感電や火災，
人身事故につながることがあります。
危険をさけるため，サービストレーニングを受けた技術者のみご使用ください。
WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifiépour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

2(P)
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type rec-
ommended by the manufacturer.
When you dispose of the battery, you must obey the
law in the relative area or country.
ATTENTION
Il y a danger d’explosion s’il y a remplacement incor-
rect de la batterie. Remplacer uniquement avec
une batterie du même type ou d’un type équivalent
recommandé par le constructeur.
Lorsque vous mettez la batterie au rebut, vous devez
respecter la législation en vigueur dans le pays ou la
région où vous vous trouvez.
VORSICHT
Explosionsgefahr bei Verwendung falscher Batterien.
Batterien nur durch den vom Hersteller empfohlenen
oder einen gleichwertigen Typ ersetzen.
Wenn Sie die Batterie entsorgen, müssen Sie die
Gesetze der jeweiligen Region und des jeweiligen
Landes befolgen.
注意
指定以外の電池に交換すると，破裂する危険があります。
必ず指定の電池に交換してください。
使用済みの電池は，国または地域の法令に従って
処理してください。
FÖRSIKTIGHET!
Fara för explosion vid felaktigt placerat batteri.
Byt endast mot samma eller likvärdig typ av batteri,
enligt tillverkarens rekommendationer.
När du kasserar batteriet ska du följa rådande lagar
för regionen eller landet.
PAS PÅ
Fare for eksplosion, hvis batteriet ikke udskiftes
korrekt.
Udskift kun med et batteri af samme eller tilsvarende
type, som er anbefalet af fabrikanten.
Når du bortskaffer batteriet, skal du følge
lovgivningen i det pågældende område eller land.
HUOMIO
Räjähdysvaara, jos akku vaihdetaan virheellisesti.
Vaihda vain samanlaiseen tai vastaavantyyppiseen,
valmistajan suosittelemaan akkuun.
Noudata akun hävittämisessä oman maasi tai
alueesi lakeja.
FORSIKTIG
Eksplosjonsfare hvis feil type batteri settes i.
Bytt ut kun med samme type eller tilsvarende
anbefalt av produsenten.
Kasser batteriet i henhold til gjeldende avfallsregler.
注意
如果更换的电池不正确，就会有爆炸的危险。
只更换同一类型或制造商推荐的电池型号。
处理电池时，必须遵守相关地区或国家的法律。
Note:
Be sure to keep your PC used for service and checking of this
unit always updated with the latest version of your anti-virus
software. In case a virus affected unit was found during service,
contact your Service Headquarters.
注意：
修理時に使用するパソコンは，ウィルス検出ソフトが常にアッ
プデートを行っているパソコンを使用してください。もし，修
理を行うセット，もしくはパソコンがウィルスに感染している
事が判明した場合は，ソニーグループ内は社内技術相談窓口に，
特約店様は特約店様専用電話窓口（修理窓口）にご相談くださ
い。
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

3(P)
SAFETY-RELATED COMPONENT WARNING!! ATTENTIONAU COMPOSANT AYANT RAPPORT
À LASÉCURITÉ!
: LEAD FREE MARK
Be careful to the following points to solder or unsolder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
2. Check the interboard wiring to ensure that no wires are “pinched”
or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to the
customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and recommend
their replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
•Set the soldering iron tip temperature to 350 °C approximately.
•Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
•Be careful not to apply force on the conductor when soldering
or unsoldering.
COMPONENTS IDENTIFIED BYMARK 0OR DOTTED LINE WITH
MARK 0ON THE SCHEMATIC DIAGRAMSAND IN THEPARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUALOR IN SUPPLEMENTS
PUBLISHED BYSONY.
UNLEADED SOLDER
This unit uses unleaded solder.
Boards requiring use of unleaded solder are printed with the lead free
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
•Set the soldering iron tip temperature to 350 °C approximately.
If cannot control temperature, solder/unsolder at high temperature
for a short time.
Caution:The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
Unleaded solder is more viscous (sticky, less prone to
flow) than ordinary solder so use caution not to let solder
bridges occur such as on IC pins, etc.
•Be sure to control soldering iron tips used for unleaded solder and
those for leaded solder so they are managed separately. Mixing un-
leaded solder and leaded solder will cause detachment phenomenon.
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0SUR LES
DIAGRAMMES SCHÉMATIQUES ET LALISTEDES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUELOU
DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY.
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

4(P)
サービ ス， 点検時には次のこ と にご注意く ださ い。
： レッ ド フ リ ーマーク
無鉛半田は， 下記の点に注意し て使用し てく ださ い。
1. 注意事項を お守り く ださ い。
サービ スのと き 特に注意を 要する 個所について は， キャ
ビ ネッ ト ， シ ャ ーシ， 部品な どにラ ベルや捺印で注意事
項を 表示し ています。 こ れら の注意書き 及び取扱説明書
等の注意事項を 必ずお守り 下さ い。
2. 指定部品のご使用を
セッ ト の部品は難燃性や耐電圧など 安全上の特性を 持っ
たも のと な っ ています。 従っ て交換部品は， 使用さ れて
いたも のと 同じ 特性の部品を 使用し て下さ い。 特に回路
図， 部品表に0印で指定さ れて いる 安全上重要な部品は
必ず指定のも のを ご 使用下さ い。
3. 部品の取付けや配線の引き ま わし はも と どおり に
安全上， チュ ーブ やテープ などの絶縁材料を 使用し たり
， プリ ン ト 基板から 浮かし て取付けた部品があり ます。
ま た内部配線は引き ま わし やク ラ ン パによ っ て 発熱部品
や高圧部品に接近し ないよ う 配慮さ れていますので， こ
れら は必ずも と どおり にし て 下さ い。
4. サービ ス後は安全点検を
サービ スのために取外し たネジ， 部品， 配線がも と ど お
り にな っ て いる か， またサービ ス し た個所の周辺を 劣化
さ せてし まっ たと こ ろ がないかな どを 点検し ， 安全性が
確保さ れている こ と を 確認し て下さ い。
5. チッ プ部品交換時の注意
・取外し た部品は再使用し ないで下さ い。
・タ ン タ ルコ ン デン サのマイ ナス側は熱に弱いため交
換時は注意し て下さ い。
6. フ レ キシブ ルプ リ ン ト 基板の取扱いについて
・半田こ てのこ て先温度は約3 50℃に設定し て く ださ
い。
・同一パタ ーン に何度も コ テ先を 当てないで下さ い。
（3回以内）
・パタ ーン に力が加わら ないよ う 注意し て 下さ い。
無鉛半田について
本機には無鉛半田が使用さ れています。
無鉛半田を 使用し ている 基板には， 無鉛（ Lead Free） を意味
するレッ ド フ リ ーマーク がプリ ント さ れています。
（注意： 基板サイ ズによ っ ては， 無鉛半田を 使用し て いても
レ ッ ド フ リ ーマーク がプ リ ント さ れていないも のが
あり ます）
・ 半田こ てのこ て先温度は約350℃に設定し てく ださ い。
温度調節が無理な場合は， 高温短時間で作業を 行っ てく だ
さ い。
注意： 半田こ てを長く 当てすぎると ， 基板のパタ ーン（ 銅
箔） がはがれてし まう こと があり ますので，注意し て
く ださ い。また，従来の半田より も粘性が強いため，
IC端子などが半田ブリ ッ ジし ないよう に注意し てく
ださ い。
・ 半田こ てのこ て先は， 必ず無鉛半田用と 有鉛半田用に分け
て管理し てく ださ い。
無鉛半田と 有鉛半田が混在すると 剥離現象が発生し てし ま
います。
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

5(P)
Specifications
Camera
[System]
Camera Type
Digital Camera
[Image sensor]
Image format
13.2 mm × 8.8 mm (1.0 type),
CMOS image sensor
Effective pixel number
of camera
Approx. 20 100 000 pixels
Total pixel number
of camera:
Approx. 21 000 000 pixels
[Lens]
ZEISS Vario-Sonnar T
f=9.4 mm – 25.7 mm
Angle of View: 84° - 34°
(35 mm format equivalent:
24 mm - 70 mm)
F1.8 (W) – F2.8 (T)
[SteadyShot]
System
Optical
[Auto focus system]
Detection system
Phase detection system/
Contrast detection system
[Monitor]
LCD monitor
7.5 cm (3.0 type)TFTdrive,
touch panel
Total number of dots
921 600 dots
Microphone
Stereo
Speaker
Monaural
Exif Print
Compatible
DPOF
Compatible
PRINT Image Matching III
Compatible
[Wireless LAN]
Supported format
IEEE 802.11 b/g/n
Frequency band
2.4 GHz
Security
WEP/WPA-PSK/WPA2-PSK
Connection method
Wi-Fi Protected Setup™ (WPS)/Manual
Access method
Infrastructure mode
[Bluetooth communications]
Bluetooth standard Ver. 4.1
Frequency band
2.4 GHz
Rechargeable battery pack NP-BX1
Rated voltage
3.6 V
Design and specifications are subject to
change without notice.
[Recording format]
File format
JPEG (DCF Ver.2.0, Exif Ver.2.31,
MPF Baseline) compliant,
RAW (SonyARW 2.3 format)
Movie (XAVC S format)
MPEG-4 AVC/H.264 XAVC S ver.1.0 format
compliant
Video: MPEG-4AVC/H.264
Audio: LPCM 2ch (48kHz 16bit)
Movie (AVCHD format)
AVCHD format Ver. 2.0 compatible
Video: MPEG-4AVC/H.264
Audio: Dolby Digital 2ch, equipped with
Dolby Digital Stereo Creator
Manufactured under license from Dolby
Laboratories.
[Recording media]
Memory Stick, SD cards
[Input/output terminals]
Multi/Micro USB Terminal*
Hi-Speed USB (USB 2.0)
*Supports Micro USB compatible devices.
HDMI
HDMI type D micro jack
(Microphone) terminal
Ø3.5 mm Stereo mini jack
[Power, general]
Rated input
3.6 V
Operating temperature
0 to 40°C (32 to 104°F)
Storage temperature
–20 to 55°C (–4 to 131°F)
Dimensions (W/H/D) (Approx.)
105.5 × 60.0 × 43.5 mm
4 1/4 × 2 3/8 × 1 3/4 in.)
Mass (Approx.)
294 g (10.4 oz)
(including battery pack, SD card)
, 2.1 W
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

6(P)
概略仕様
本体
［ 形式］
カメ ラタイプ
デジタルカメラ
［ 撮像部］
撮像素子
13.2 mm×8.8 mm (1.0型)、
CMOSイメージセンサー
カメ ラ 有効画素数
約20 100 000画素
総画素数
約21 000 000画素
［ レンズ］
ZEISSバリ オ・ ゾナーT＊
f=9.4 mm ～ 25.7 mm
(画角84°～34° (35 mm判
相当24 mm ～ 70 mm))、
F1.8 (W) ～F2.8 (T)
［ 手ブレ 補正］
形式
光学式
［オート フォーカス］
検出方式
位相差検出方式/
コントラスト検出方式
［モニタ ー］
液晶モニタ ー
7.5 cm (3.0型)、TFT駆動、
タッチパネル
ド ット 数
921 600ドット
マイクロホン
ステレオ
スピ ーカ ー
モノラル
Exif Print
対応
DPOF
対応
PRINTImageMatching III
対応
［ ワイヤレスLAN］
対応規格
IEEE 802.11 b/g/n
使用周波数帯
2.4 GHz帯
セキュリティ
WEP/WPA-PSK/WPA2-PSK
接続方式
Wi-Fi Protected Setup™ (WPS)/マニュアル
アクセス方式
インフラストラクチャーモード
［Bluetooth通信］
Bluetooth標準規格Ver. 4.1
使用周波数帯
2.4 GHz帯
リチャージャブルバッテリ ーパック NP-BX1
定格
3.6 V
本機や付属品の仕様および外観は、
改良のため予告なく変更することが
ありますが、ご了承ください。
［ 記録方式］
静止画記録方式
JPEG (DCF Ver.2.0、Exif Ver.2.31、
MPF Baseline) 準拠、
RAW (ソニーARW 2.3フォーマット)
動画記録方式 (XAVC S方式)
MPEG-4 AVC/H.264 XAVC S ver.1.0規格準拠
映像：MPEG-4 AVC/H.264
音声：LPCM 2ch (48kHz 16bit)
動画記録方式 (AVCHD方式)
AVCHD規格 Ver2.0準拠
映像：MPEG-4 AVC/H.264
音声：Dolby Digital 2chドルビーデジタル
ステレオクリエーター搭載
・ドルビーラボラトリーズからの実施権に基づき
製造されています。
［ 記録メ ディ ア］
メモリースティック、SD カード
［ 入/出力端子］
マルチ/マイクロ USB端子*
USB通信 Hi-Speed USB (USB 2.0)
*この端子にはマイクロUSB規格に対応した
機器をつなぐことができます。
HDM I端子
HDMIタイプD マイクロ端子
(マイク) 端子
Ø3.5 mmステレオミニジャック
［ 電源・ その他］
定格
3.6 V 、2.1 W
動作温度
0～40℃
保存温度
－20～55℃
外形寸法 (幅×高さ ×奥行き) (約)
105.5×60.0×43.5 mm
質量
約294 g (バッテリー、SDカードを含む)
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

7(P)
Model Information
Model
ZV-1
Destination
UC2, TW6, KR2, J1
CE3, E32, IN5, CN1
Color system
NTSC
PAL
GPS
-
-
Wi-Fi
✓ ✓
NFC
-
-
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

1
Table of Contents
Manual Structure.....................................................................................................................................................................................2
Purpose of this manual.........................................................................................................................................................................2
Related manuals...................................................................................................................................................................................2
Section 1 Trouble Shooting ..................................................................................................................................................................5
1-1. Self-diagnosis Function ................................................................................................................................................................5
1-1-1. Self-diagnosis Function .........................................................................................................................................................5
1-1-2. Note on the Function of Boards.............................................................................................................................................5
1-1-3. Self-diagnosis Code Table .....................................................................................................................................................5
Section 2 Service Note .........................................................................................................................................................................7
2-1. Operation Notes............................................................................................................................................................................7
2-1-1. Flexible Board .......................................................................................................................................................................7
2-1-2. Fine-Wire Coaxial Cable .......................................................................................................................................................7
2-2. Precaution on Replacing the SY-1112 Board ................................................................................................................................8
2-2-1. Destination Data ....................................................................................................................................................................8
2-2-2. Restore Data ..........................................................................................................................................................................8
2-2-3. USB Serial No. and Product ID.............................................................................................................................................8
2-2-4. Update of MACAddress........................................................................................................................................................8
2-3. Notes on Replacing the Lens ........................................................................................................................................................9
2-3-1. Selection of Spacer Plate when Mounting the Imager Board.................................................................................................9
2-3-2. Adjustment after Replacing the Lens.....................................................................................................................................9
2-4. Notes on Removing/Installing the Imager Board (CD-1009 Flexible Board).............................................................................10
2-5. Checking the Wi-Fi Function......................................................................................................................................................11
2-6. Precaution on Replacing the SY-1112 Board ..............................................................................................................................12
2-6-1. Angular Velocity Sensor ......................................................................................................................................................12
Section 3 Adjustment .........................................................................................................................................................................13
Section 4 Replacement of Main Parts.................................................................................................................................................23
4-1. Disassembly Flow.......................................................................................................................................................................23
4-2. Disassembly................................................................................................................................................................................24
4-2-1. Overall Section ....................................................................................................................................................................24
4-2-2. SY Board Section-1 .............................................................................................................................................................27
4-2-3. SY-Board Section-2 .............................................................................................................................................................31
4-2-4. MS Board Section................................................................................................................................................................37
4-2-5. BT Holder Section...............................................................................................................................................................41
4-2-6. Front Section-1 ....................................................................................................................................................................46
4-2-7. Front Section-2 ....................................................................................................................................................................50
4-2-8. Rear Section.........................................................................................................................................................................55
4-2-9. LCD Section........................................................................................................................................................................62
4-3. Lens Block..................................................................................................................................................................................67
4-3-1. Ornamental Ring (A) or Barrier Block Assy Replacing Method .........................................................................................67
4-3-2. Group Frame Block Assy Replacing Method ......................................................................................................................69
4-3-3. Tube Lubricating Block Assy...............................................................................................................................................80
4-3-4. Shutter (SH1710), Iris (IR1710)..........................................................................................................................................82
Section 5 Repair Parts List .................................................................................................................................................................85
5-1. Note on Repair Parts...................................................................................................................................................................85
5-2. Exploded Views..........................................................................................................................................................................86
Overall Section...............................................................................................................................................................................86
SY Board Section...........................................................................................................................................................................87
BTH Holder Section.......................................................................................................................................................................88
Front Section..................................................................................................................................................................................89
Rear Section...................................................................................................................................................................................90
Lens Block Section-1 .....................................................................................................................................................................91
Lens Block Section-2 .....................................................................................................................................................................93
5-3. Accessories .................................................................................................................................................................................94
Revision History....................................................................................................................................................................................95
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

2
Manual Structure
Purpose of this manual
This manual describes the information items that premise the service based on the components parts assuming use of system and
service engineers.
Related manuals
Besides this manual, the following manuals are available.
• Startup Guide (Supplied with this unit)
• Help Guide (Web manual)
Refer to “Help Guide” for in-depth instructions on the many functions of the camera.
• Adjust Manual (Available on request)
The adjustment software is necessary for adjustment and various checking of this unit for the service.
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

3
目次
このマニュアルについて .........................................................................................................................................................................4
本書の目的..........................................................................................................................................................................................4
関連マニュアル ...................................................................................................................................................................................4
第1章トラブルシューティング ..........................................................................................................................................................14
1-1. 自己診断機能 ...........................................................................................................................................................................14
1-1-1. 自己診断機能について .....................................................................................................................................................14
1-1-2. 基板について .....................................................................................................................................................................14
1-1-3. 自己診断コード表 ..............................................................................................................................................................14
第2章サービスノート........................................................................................................................................................................16
2-1. 作業時の注意 ...........................................................................................................................................................................16
2-1-1. フレキシブル基板...............................................................................................................................................................16
2-1-2. 細線ケーブル .....................................................................................................................................................................16
2-2. SY-1112 基板交換時の注意 ......................................................................................................................................................17
2-2-1. 仕向データ .........................................................................................................................................................................17
2-2-2. リストアデータ .....................................................................................................................................................................17
2-2-3. USB シリアルナンバーとプロダクト ID について ................................................................................................................17
2-2-4. MAC アドレスの更新 ..........................................................................................................................................................17
2-3. レンズ交換時の注意 .................................................................................................................................................................18
2-3-1. イメージャ基板取り付け時のあおり板の選択 ....................................................................................................................18
2-3-2. 交換終了後の調整時.........................................................................................................................................................18
2-4. イメージャ基板（CD-1009 フレキシブル基板）の取り外し／取り付け時の注意 .......................................................................19
2-5. Wi-Fi 接続確認 ..........................................................................................................................................................................20
2-6. SY-1112 基板交換時の注意 ......................................................................................................................................................21
2-6-1. 角速度センサー .................................................................................................................................................................21
第3章調整について........................................................................................................................................................................22
Section 4 Replacement of Main Parts.................................................................................................................................................23
4-1. Disassembly Flow.......................................................................................................................................................................23
4-2. Disassembly................................................................................................................................................................................24
4-2-1. Overall Section ....................................................................................................................................................................24
4-2-2. SY Board Section-1 .............................................................................................................................................................27
4-2-3. SY-Board Section-2 .............................................................................................................................................................31
4-2-4. MS Board Section................................................................................................................................................................37
4-2-5. BT Holder Section...............................................................................................................................................................41
4-2-6. Front Section-1 ....................................................................................................................................................................46
4-2-7. Front Section-2 ....................................................................................................................................................................50
4-2-8. Rear Section.........................................................................................................................................................................55
4-2-9. LCD Section........................................................................................................................................................................62
4-3. Lens Block..................................................................................................................................................................................67
4-3-1. Ornamental Ring (A) or Barrier Block Assy Replacing Method .........................................................................................67
4-3-2. Group Frame Block Assy Replacing Method ......................................................................................................................69
4-3-3. Tube Lubricating Block Assy...............................................................................................................................................80
4-3-4. Shutter (SH1710), Iris (IR1710)..........................................................................................................................................82
Section 5 Repair Parts List .................................................................................................................................................................85
5-1. Note on Repair Parts...................................................................................................................................................................85
5-2. Exploded Views..........................................................................................................................................................................86
Overall Section...............................................................................................................................................................................86
SY Board Section...........................................................................................................................................................................87
BTH Holder Section.......................................................................................................................................................................88
Front Section..................................................................................................................................................................................89
Rear Section...................................................................................................................................................................................90
Lens Block Section-1 .....................................................................................................................................................................91
Lens Block Section-2 .....................................................................................................................................................................93
5-3. Accessories .................................................................................................................................................................................94
Revision History....................................................................................................................................................................................95
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

4
このマニュアルについて
本書の目的
本書は，システムエンジニアやサービスエンジニアの方々にご使用いただくことを想定し，本機の保守に関する情報，部品レベル
までのサービスを前提とした情報を記載しています。
関連マニュアル
本機には，この「サービスマニュアル」のほかに，下記のマニュアルが用意されています。
• スタートガイド（本機に付属）
• ヘルプガイド（Web 取扱説明書）
Web 上のマニュアル「ヘルプガイド」もご覧ください。パソコンやスマートフォンでご覧いただけます。
• アジャストマニュアル（別途用意）
本機の調整および各種動作確認を行うのに必要なサービス用の調整ソフトウェアです。
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

5
Section 1
Trouble Shooting
1-1. Self-diagnosis Function
1-1-1. Self-diagnosis Function
If an error occurs in this unit, the self-diagnosis function starts working and a code consisting of one alphabet and a fourdigit number
appears on the LCD. Classification of persons in charge, classification of faulty blocks, and details of errors can be checked by
referring to this indication of five alphanumeric characters in the self-diagnosis code table.
The history of past errors can be checked in “Usage and Diag record” on the DATA tab of the Adjust Manual.
The self-diagnosis function is also described in the operation manual.
1-1-2. Note on the Function of Boards
The boards and functions used in this model are mentioned in the following table.
Board
Function
BT board
Battery
CD board
Imager
MIS board
Multi interface shoe
MS board
Wireless LAN module, Card slot
PD board
LCD
RE board
LCD rotation detect sensor, LCD open/close detect sensor
RL-1065 board
6 axial acceleration sensor, Switch
RL-1066 board
Microphone, Speaker
SY board
PITCH/YAW angular velocity sensor, Lens control, CPU, power control, Other function
1-1-3. Self-diagnosis Code Table
Self-diagnosis Code
Symptom/State Correction
Repaired
by:
Block
Function
Detailed
Code
C
13
01
Memory card is unformatted or
memory card is broken.
Format the memory card.
Insert a new memory card.
C
32
01
Trouble with hardware
Turn power off and turn power on again.
C
32
60
Difficult to adjust focus
(Cannot initialize focus)
Turn power off and turn power on again. When this error
is not cleared, the focus control signal for the lens block
may be faulty.
Check whether this error is due to the lens or the board.
Replace the faulty lens or board.
E
41
00
Abnormality of the wireless LAN
module or CPU
The peripheral circuit of between CPU and wireless LAN
module may be faulty.
Replace the board that contains this peripheral circuit.
E
61
00
Difficult to adjust focus
(Cannot initialize focus)
Turn power off and turn power on again. When this error
is not cleared, the focus control signal for the lens block
may be faulty.
Check whether this error is due to the lens or the board.
Replace the faulty lens or board.
E
61
10
Zoom operations fault
(Cannot initialize zoom lens)
Turn power off and turn power on again. When this error
is not cleared, operate the zoom lever and check
following items.
• When zooming is performed, the zoom control signal
for the lens block may be faulty.
• When zooming is not performed, the zoom motor
drive circuit may be faulty.
Check whether this error is due to the lens or the board.
Replace the faulty lens or board.
Continued
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

6
Self-diagnosis Code
Symptom/State Correction
Repaired
by:
Block
Function
Detailed
Code
E
61
30
Reset position detection error on the
stepper iris initializing
Turn the power on to open lens barrier. Disconnect the
battery or power cord, and then connect again. And
confirm that the iris blades in lens are working.
If iris blades do not work, check the iris motor drive
circuit in lens drive block. If iris blades work normally,
confirm that they are closing completely and confirm
following items.
• Case of the iris blades do not close normally. Replace
the lens block.
• Case of “E: 61: 30” is appeared and iris blades closed
completely. Confirm that communication with lens
block is normal.
• Case of LCD is not displayed normally, check that
connection between imager board and main board.
• Case of LCD is displayed normally, replace the lens
block.
E
62
00
Steadyshot does not work well.
(With PITCH angular velocity
sensor output stopped)
The peripheral circuit of the PITCH angular velocity
sensor may be faulty.
Replace the board that contains this peripheral circuit.
E
62
01
Steadyshot does not work well.
(With YAW angular velocity sensor
output stopped)
The peripheral circuit of the YAW angular velocity
sensor may be faulty.
Replace the board that contains this peripheral circuit.
E
62
02
Abnormality of IC for steadyshot.
Check signal line connections from CPU through
steadyshot IC to PITCH/YAW drive.
When there is no problem with the connections, replace
the board that contains this peripheral circuit.
E
62
04
Image vibration correction during
steadyshot does not work.
The image vibration angular velocity sensor peripheral
circuit may be faulty.
Replace the board that contains this peripheral circuit.
E
62
10
Shift lens initializing failure
Replacement of lens block. *1
If an error occurs again, steadyshot circuit may be faulty.
Replace the board that contains this peripheral circuit.
E
62
11
Shift lens overheating (PITCH)
Check signal line connections from CPU through
steadyshot IC to PITCH/YAW drive.
When there is no problem with the connections, check
whether this error is due to the lens or the board.
Replace the faulty lens or board.
E
62
12
Shift lens overheating (YAW)
Check signal line connections from CPU through
steadyshot IC to PITCH/YAW drive.
When there is no problem with the connections, check
whether this error is due to the lens or the board.
Replace the faulty lens or board.
E
62
20
Abnormality of thermistor
Check signal line connections from CPU through
steadyshot IC to PITCH/YAW drive.
When there is no problem with the connections, check
whether this error is due to the lens or the board.
Replace the faulty lens or board.
E
91
01 *2
Abnormality when flash is being
charged
Checking of flash unit or replacement of flash unit.
E
92
00
Battery/Dry cell distinction defect
Turn power off and turn power on again.
E
94
00 *2
Fault of writing or erasing the
internal memory
Turn power off and turn power on again.
E
94
02
BGM data error
The CPU may be faulty.
Replace the board that contains this peripheral circuit.
E
95
00 *2
GPS hardware error
Check the signal line connection for GPS.
When there is no problem with the connections, replace
the board that contains this peripheral circuit.
E
95
01
Acceleration sensor hardware error
Turn power off and turn power on again.
When this error is not cleared, the peripheral circuit of
the acceleration sensor may be faulty.
Replace the board that contains this peripheral circuit.
E
95
02 *2
Electronic compass hardware error
(GPS hardware error)
The peripheral circuit of the electronic compass may be
faulty.
Replace the board that contains this peripheral circuit.
*1: When the lens block was replaced, start the Adjust Manual in the Adjust Station and execute the necessary adjustment items. After the adjustment,
make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in the handheld operation.
*2: Function of this code is not provided in this unit.
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

7
Section 2
Service Note
2-1. Operation Notes
2-1-1. Flexible Board
• Make sure that the conductive side of a flexible board does not have any stain or foreign materials.
• Do not touch the conductive side of flexible boards with bare hands.
• Plug in a flexible board straight, fully into the connector until it reaches the end inside.
• When opening the connector's holder in direction A, do not open it with excessive force.
• When closing the connector's holder, press it evenly while pushing a flexible board in direction B.
• Make sure that the flat cable and flexible board are not cracked or bent at the contact end.
• Do not apply excessive force to the gilded flexible board.
2-1-2. Fine-Wire Coaxial Cable
• The proper way to disconnect a connector is to grab the connector instead of the wires. If you pull on the wires, they might be
broken.
• The proper way to connect a connector is to grab the connector instead of the wires. If you push on the wires, they might be
broken.
Flexible
Board Flexible
Board
Connector Connector
Reference line Flexible
Board
Connector Connector
Flexible
Board
Reference line
Connector Connector
Flexible
Board
Flexible
Board
Reference line
OK
(The flexible board was plugged in
straight and completely) (The flexible board was plugged in
crooked.)
NG NG
(The flexible board was not plugged in
completely.)
Holder
Connector Flexible Board
A
A
Holder
Insulation side
Connector Flexible Board
B
Cutandremovethepartofgilt
which comes off at thepoint.
(Becareful or some
piecesofgiltmaybeleftinside)
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

8
2-2. Precaution on Replacing the SY-1112 Board
The board for repair is not recorded the information unique to a model. Therefore the following data are needed to write.
The [LOAD AND WRITE] function in “ADJUSTMENT DATA BACKUP” on the DATA tab in the Adjust Manual overwrites all
data of the unit. Therefore execute the [LOAD AND WRITE] before performing the following operation.
2-2-1. Destination Data
The destination data stored in the repairing board is different from the destination setting stored in the board before replacement in
some cases.
When the board has been replaced with a repairing board, be sure to set the destination.
Method of the destination data write:
Start the Adjust Manual in the Adjust Station and execute the “Destination data write” on the ADJUST tab.
2-2-2. Restore Data
Before replacing the board with a repairing board, be sure to extract the data from the former one.
Method of the data extracting:
Start the Adjust Manual in the Adjust Station and execute the “RESTORE DATA” on the DATA tab.
2-2-3. USB Serial No. and Product ID
The unit is shipped after an ID (USB Serial No.) unique to each unit and an ID (Product ID) unique to each model have been written.
These IDs have not been written in a new repairing board. Therefore, after the board has been replaced, be sure to write these IDs to a
new repairing board.
Method of the ID writing:
Start the Adjust Manual in theAdjust Station and execute the “PRODUCT ID & USB SERIAL No. INPUT” on the ADJUST tab.
2-2-4. Update of MAC Address
When a board that contains Wi-Fi has been replaced or when replacing a board that contains the main IC (CPU), the IC’s unique
number (MAC address) must be reloaded.
Procedure of the MAC address update:
Perform the below operations after all work has been done.
1. Start the Adjust Manual in the Adjust Station and execute the “Wireless LAN Setting (MAC Address)” on the ADJUST tab.
2. Operate the unit to initialize of SSID/PW.
Applicable parts:
• SY-1112 BOARD, COMPLETE (SERVICE)
• MS-1041 BOARD, COMPLETE
After the replacement and repair, the MAC address is changed, and thus the re-setting for connection devices is required.
Accordingly, download the Flyer of WLAN Reset (Flyer of WLAN Reset_9834752[][].pdf) and print out it, and attach it to the set
when returning the set to customer.
Note
Note
Note
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

9
2-3. Notes on Replacing the Lens
When replacing the lens, read the QR code of the repair lens.
To read the QR code, start theAdjust manual and press the QR code reader button.
The read data is used in the following processes.
• Selection of Spacer Plate when mounting the imager board
• Adjustment after replacing the lens
2-3-1. Selection of Spacer Plate when Mounting the Imager Board
1. Load the Spacer Plate on the QR code reader screen.
2. The thickness of the Spacer Plate to be loaded is displayed.
3. Select the Spacer Plate according to the instructions on the screen and mount the imager board.
2-3-2. Adjustment after Replacing the Lens
Perform LOAD from “Lens data carry” on the ADJUST tab in the Adjust manual.
QR code
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

10
2-4. Notes on Removing/Installing the Imager Board (CD-1009 Flexible Board)
When the CD-1009 Flexible Board (Imager) is mounted to the lens, shift and tilt adjustment is made with Spacer Plates.
When removing the CD-1009 Flexible Board, pay attention to the following.
1. When the lens is not replaced
Example: In the case of disassembly, cleaning, or replacement of the CD-1009 Flexible Board. (Imager)
• Check and record the size of the built-in three Spacer Plates and store them so as not to lose them.
• When assembling the CD-1009 Flexible Board, be sure to install the Spacer Plates to their original locations.
Be careful not to lose the Spacer Plates.
If any Spacer Plate is lost or their previous positions are not sure, repeatedly take a photo and check that there is no local defocus.
Selecting appropriate Spacer Plates is needed.
2. When the lens is replaced
Refer to “2-3. Notes on Replacing the Lens” for select Spacer Plates and install them to the new lens.
Size
0.xx
Note
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

11
2-5. Checking the Wi-Fi Function
After this unit has been disassembled and reassembled, check the Wi-Fi function.
Required equipment:
Windows PC or smartphone with Wi-Fi interface
Procedure:
1. Turn on the power of the unit and enable the Wi-Fi function.
(Upon completion of the preparation for Wi-Fi connection, the password for Wi-Fi connection is displayed.)
2. Confirm on the PC or the smartphone that the unit is detected as a connectable wireless network.
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)

12
2-6. Precaution on Replacing the SY-1112 Board
2-6-1. Angular Velocity Sensor
Before replacing the board with a repairing board, be sure to record the sensitivity indicated on the angular velocity sensor on the
repairing board.
The recorded sensitivity indication must be stored in the repairing board.
Method of the angular velocity sensor sensitivity writing:
Start the Adjust Manual in the Adjust Station and execute the “Angular velocity sensor sensitivity adj” on the ADJUST tab.
The sensitivity of the angular velocity sensor is indicated only on the repairing board, but is not indicated on mass production boards.
Note
Sony CONFIDENTIAL
For Authorized Servicer
SYSSET
2020/05/2823:46:49(GMT+09:00)