Sony DR-ZX701iP User manual

Making rich, full sound on-the-go a reality, the Sony® DR-ZX701IP
Headphones for iPhone® deliver precision monitor sound with the sound
characteristics of professional studio monitor headphones, while an in-line
remote provides track and volume controls1 for iPod® or iPhone® and the
built-in microphone lets you take calls on the go.
Sound story
50 mm driver units and high-energy neodymium magnets (360 kJ/m3) provide a wide dynamic
frequency response (5 Hz - 40 kHz) with accurate precision monitor sound.
Made for iPod®/iPhone®/iPad®
Full integration for iPod, iPhone and iPad.1 The in-line remote gives you volume and track controls
(Play, Stop, Next/Prior) for iPod, iPhone or iPad, and the built-in microphone makes it easy to take
calls through it all.
VoiceOver support
The simple press of a button activates VoiceOver mode where the iPod® states the name of the
currently playing song or
playlist (on enabled devices).
Comfortable silence
Newly-developed noise isolating ear pads use pressure relieving urethane foam to cover the
entire ear for not only an outstanding t, but reduced ambient noise.
In the studio or on the go!
Headphones cable -1.2 m in length with 3.5 mm gold plated 4 band plug - provides for minimal
signal loss and ultimate performance!
Power Input
Resists high-power input, up to 2,000 mW.
Specications
Audio
Driver Unit Closed, Dynamic
50 mm, dome type (OFC Voice Coil) PET Diaphragm
Frequency Response 5 - 40,000 Hz
Impedance 24 ohms at 1 kHz
Sensitivity (db) 106 dB/mW
Volume Control +/- Button
Convenience
Remote Control Functions Volume, FF, RW, Play, Pause, Mic
General
Design Circum Aural, Over the Head Monitor
Headband Wide, Adjustable
Magnet High-energy Neodymium (360kJ/m³)
Plug Four-conductor gold-plated stereo mini plug for iPod with remote function
Type of Use Portable
Hardware
Cord 47 1/4 in (1.2 m), Single-sided
Headphone Type Circum-Aural
Microphone Electret Condenser
DR-ZX701IP Sony® Monitor Headphones for iPhone®

1. Works with iPad®, iPhone 4, iPhone 3GS, iPod classic® 120GB & 160 GB (2009), iPod nano®
4th, 5th & 6th generation, iPod shue® 3rd & 4th generation, and iPod touch® 2nd, 3rd &
4th generation.
© 2011 Sony Electronics, Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony is a trademark of Sony. iPad, iPod, and iPhone
are registered trademarks of Apple Inc. All other trademarks are trademarks of their
respective owners. Features and specications are subject to change without notice.
/Updated: February 1, 2012
Inputs and Outputs
Digital Audio Input(s)
Compatibility-
The terms: iPod, iPhone and iPad are collectively described as “iPod” except in special
cases.
iPhone 4
iPhone 3GS
iPod touch® 4th generation
iPod touch 3rd generation
iPod touch 2nd generation
iPod nano® 6th generation
iPod nano 5th generation
iPod nano 4th generation
iPod classic® 120GB 160GB (2009)
iPod shue® 4th generation
iPod shue 3rd generation
iPad®
Microphone Input Omni Directional, In-Line Microphone
Power
Power Handling Capacity 2000 mW (IEC)
Weights and Measurements
Cord Length (Approx.) 47 1/4 in (1.2 m)
Weight (Approx.) 9.17 oz. (260 g)
Accessories
Supplied Accessories Operating Instructions (1)
Warranty Card (1)