Sony Qlasp MDR-PQ4/BRN User manual

Hang on
Clips on and hangs tough through all your tricks, ips and whatever. What can we say; who likes
earbuds falling out.
Sound
Crystal clear sound right in your ear. So earbuds and 9MM drivers combine for a comfortable
and snug t that delivers clear sound to your inner ear.
Go anywhere
Hook’em anywhere you like, so you can take them everywhere you go.
Specications
© 2010 Sony Electronics, Inc. All rights reserved. Reproduction in whole or in part without
written permission is prohibited. Sony, PIIQ and Qlasp are trademarks of Sony. Features and
specications are subject to change without notice. Non-metric weights and measures are
approximate and may vary. /Updated: April 9, 2012
Amplier Section
Impedance 16 ohms at 1 kHz
Audio
Driver Unit 9 mm (CCAW adopted), dome type
Frequency Response 6 – 23,000 Hz
Audio Features
Ear Cups Closed, Dynamic
General
Design In-the-ear
Plug Gold-plated L-shaped stereo mini
Hardware
Cord Connecting cord 3.9  (1.2 m)
Power
Power Handling Capacity 100mW
Weights and Measurements
Cord Length (Approx.) 3.9 ., Litz cord, Y-type
Weight (Approx.) 0.28 oz.
Accessories
Supplied Accessories Operating Instuctions
Earbuds (S,M,L)
MDR-PQ4/BRN Qlasp™ Earbuds