Sony HT-K250 User manual

model name1[HT-K250]
[4-247-255-11(1)]
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB01COV_HT-K250_CEL.fm] masterpage:Right
©2003 Sony Corporation
4-247-255-11(1)
Home Theater
System
Operating Instructions ________________________
Mode d’emploi______________________________
Manual de instrucciones ______________________
HT-K250
FR
ES
GB

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB02REG_HT-K250_CEL.fm]
2GB
model name1[HT-K250]
[4-247-255-11(1)]
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To prevent fire, do not cover the ventilation of the
apparatus with news papers, table-cloths, curtains, etc.
And don’t place lighted candles on the apparatus.
To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
Don’t throw away the battery with
general house waste, dispose of it
correctly as chemical waste.
Do not install the appliance in a confined space, such
as a bookcase or built-in cabinet.
This system incorporates Dolby* Digital and Pro
Logic Surround and the DTS** Digital Surround
System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
**“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
About This Manual
The instructions in this manual describe the
controls on the remote.
You can also use the controls on the control
center if they have the same or similar names as
those on the remote.
Forthebuttonlocation of remote,see“Usingthe
supplied remote to controlling the other
component” on page 23.
WARNING
NX
mM
.>
-
VIDEO DVD
SYSTEM STANDBY SLEEP
TV ?/1 AV ?/1
SAT TV
AUX TUNER
; PL/PLII A.F.D.
–
MUTING
MASTER
VOL
TV VOL TV CH
WIDE TEST TONE
TV/
VIDEO MAIN MENU
+
TUNING DISC ALT
ANT CLEAR SEARCH MODE
AAC
BI-LING FM MODE
123
456
789
0/10 >10/11 ENTER/12
D.TUNING
MEMORY SHIFT
SOUND
FIELD
TIME SWAP JUMP PRESET/
CH/D.SKIP
AUDIO ANGLE SUBTITLE
x
?/1
TOP MENU/
GUIDE
AV MENU
DISPLAY RETURN/EXIT
O
f
F
Gg
ENTER

masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB02COV_HT-K250_CELTOC.fm]
model name1[HT-K250]
[4-247-255-11(1)]
3GB
Getting Started
1: Unpacking...........................................4
2: Connecting the control center and
subwoofer .........................................5
3: Connecting components with digital
audio output jacks.............................6
4: Connecting video components............8
5: Connecting the antennas.....................9
6: Placing speakers................................10
7: Connecting speakers .........................11
8: Attaching the stand ...........................13
9: Connecting the AC power cord ........14
Checking the connections and
settings............................................14
Listening to the Sound of
Connected Components
Selecting the component.......................16
About the indications in the display......17
Receiving FM/AM broadcasts..............18
Presetting radio stations........................19
Enjoying Surround Sound
Selecting a sound field..........................21
Other Operations/Settings
Using the Sleep Timer ..........................23
Using the supplied remote to controlling
the other component .......................23
Changing the factory setting of a function
button on the remote.......................25
Setting up the speakers..........................26
Customizing sound fields......................27
Additional Information
Precautions............................................29
Troubleshooting....................................30
Specifications........................................31
Glossary ................................................32
List of button locations and reference
pages...............................................34
Index .....................................................36
Table of Contents
GB

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
4GB
model name1[HT-K250]
[4-247-255-11(1)]
Check that the following items are supplied:
• Control center (1)
• Subwoofer (1)
• Micro satellite speakers (5)
• Control center stand and a screw (1 each)
• Remote commander (1)
• R6 (size AA) batteries (2)
• Speaker cords (long) (2)
• Speaker cords (short) (3)
• System cord (1)
• Optical digital cord (1)
• FM wire antenna (1)
• AM loop antenna (1)
• Speaker foot pads (20)
• Speaker sticker (1)
• Speaker adaptor for wall use and a screw (5
each)
• This Operating Instructions (1)
• Speaker installation guide (1)
Inserting batteries into the
remote
Insert two R6 (size AA) batteries with the + and
– properly oriented in the battery compartment.
Tip
Under normal conditions, the batteries should last for
about 6 months. When the remote no longer operates
the control center, replace both batteries with new
ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not exposethe remote sensor of the control center
to direct sunlight or lighting apparatuses. Doing so
may cause a malfunction.
• If you do not use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
• Turn off the power to all components before making
any connections.
• Be sure to make connections firmly to avoid hum and
noise.
Getting Started
1: Unpacking

Getting Started
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
5GB
model name1[HT-K250]
[4-247-255-11(1)]
Required cords
System cord (supplied)
Control center
Note
Be sure to disconnect the AC power cord before connecting or disconnecting the system cord.
If you disconnect the system cord with the AC power cord connected, the system may not turn on. In this case,
disconnect the AC power cord, reconnect the system cord, then connect the AC power cord and turn on the system
again.
2: Connecting the control center and subwoofer
DVD
CONTROL
CONTROL
SAT AUX
INPUT
COAXIALOPTICAL
TV
VIDEO
L
R
SPEAKERS
SURR R
FRONT R
SURR L
FRONT L
CENTER
AM
U
ANTENNA
DIGITAL ANALOG
COAXIAL
FM
75
Subwoofer

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
6GB
model name1[HT-K250]
[4-247-255-11(1)]
.
Connect the digital audio output jacks of your DVD player or other component (“Play Station 2”, CD
player, MD deck, satellite tuner, etc.) to the control center’s digital audio input jacks to bring the multi
channel surround sound of a movie theater into your home.
Connect the video output jacks of your DVD player or “Play Station 2” to the video input jacks of your
TV.
Note
You cannot input the video signal to this system. When you connect video components (VCR, TV, etc.), connect the
video output jack of the video component to the video input jack of your TV.
Required cords
Optical digital cord (supplied)
Coaxial digital cord (not supplied)
Control center
Tip
The digital input jacks are compatible with 32 kHz, 44.1 kHz, and 48 kHz sampling frequencies.
3: Connecting components with digital audio output jacks
CONTROL
OUTPUT
OPTICAL
OUT
OUTPUT
OPTICAL
OUT
OUTPUT
COAXIAL
OUT
DVD SAT AUX
INPUT
COAXIALOPTICAL
TV
VIDEO
L
R
AM
U
ANTENNA
DIGITAL ANALOG
COAXIAL
FM
75
DVD player or
“Play Station 2” Satellite tuner Other digital audio/video
components (CD player,
MD deck, etc.)

Getting Started
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
7GB
model name1[HT-K250]
[4-247-255-11(1)]
Setting for when you use Sony DVD player or “Play Station 2”
When you connect DVD player or “Play Station 2” as shown on the previous page, perform the
followingsettingsoneach component.Fordetails,refertothe operatinginstructionssuppliedwitheach
component.
DVD player
1Select “AUDIO SETUP” in the setup
display.
2Set “AUDIO DRC” to “WIDE RANGE”.
3Set “DIGITAL OUT” to “ON”.
4Set “DOLBY DIGITAL” to “DOLBY
DIGITAL”.
5Set “DTS” to “ON”.
“Play Station 2”
1Select “AUDIO SETTING” in the setup
display.
2Select “AUDIO DIGITAL OUTPUT”.
3Set “OPTICAL DIGITAL OUTPUT” to
“ON”.
4Set “DOLBY DIGITAL” to “ON”.
5Set “DTS” to “ON”.
“Play Station 2” is a trademark of Sony Computer Entertainment.

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
8GB
model name1[HT-K250]
[4-247-255-11(1)]
Required cords
Audio cord (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components; white (left) to white; and red (right) to red.
Note
You cannot input the video signal to this system. When you connect video components (VCR, TV, etc.), connect the
video output jack of the video component to the video input jack of your TV.
White (L)
Red (R)
4: Connecting video components
CONTROL
L
R
OUTPUT
AUDIO
OUT
R
L
OUTPUT
AUDIO
OUT
DVD SAT AUX
INPUT
COAXIALOPTICAL
TV
VIDEO
L
R
AM
U
ANTENNA
DIGITAL ANALOG
COAXIAL
FM
75
VCR
Control center
TV monitor

Getting Started
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
9GB
model name1[HT-K250]
[4-247-255-11(1)]
Connect the supplied AM loop antenna and FM wire antenna.
Notes on antenna hookups
• To prevent noise pickup, keep the AM loop antenna away from the receiver and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as horizontal as possible.
• When you connect supplied AM antenna to the component, connect the black cord (B) to Ujack, and the white
cord (A) to the other jack.
5: Connecting the antennas
CONTROL
DVD SAT AUX
INPUT
COAXIALOPTICAL
TV
VIDEO
L
R
AM
U
ANTENNA
DIGITAL ANALOG
COAXIAL
FM
75
AM loop antenna
(supplied)
FM wire antenna
(supplied)
B
A
U

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
10GB
model name1[HT-K250]
[4-247-255-11(1)]
To fully enjoy surround sound, configure your speakers as below.
• Place the front speaker in a location 1 to 7 meters from the listening position (A).
• You can enjoy a higher quality sound effect if you place the center speaker from a distance equal to
the front speaker distance (A) to a distance 1.5 meters closer to your listening position (B).
• You can enjoy a higher quality sound effect if youplace the surroundspeakers from a distance equal
to the front speaker distance (A) to a distance 4.5 meters closer to your listening position (C).
• Place the subwoofer at the same distance from the listening position as the front speaker (left or
right).
When placing surround speakers to your side
Subwoofer
When placing surround speakers behind you
Subwoofer
Note
Do not place the center speaker and surround speakers farther away from the listening position than the front
speakers.
6: Placing speakers
45˚
90˚
20˚
B
CC
A A
45˚
90˚
20˚
CC
AA
B
Listening position
Listening position

Getting Started
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
11GB
model name1[HT-K250]
[4-247-255-11(1)]
Be sure to place the speakers before making connections.
On the subwoofer
Connect the speaker cords by matching the color of speaker plugs and speaker jacks.
On the satellite speakers
Stick the supplied speaker stickers (“FRONT L” etc., 5 colors) on the satellite speakers and connect the
speaker cords by matching the color of speaker stickers and the color tubes on the speaker cords.
Speaker cords (supplied)
Connect the cord with a black tube to the (–) jack.
7: Connecting speakers
Black tube
Speaker plug
Red tube
(–)
(+) Color tube
CONTROL
SPEAKERS
SURR R
FRONT R
SURR L
FRONT LCENTER
–
+
–
+
–
+
–
+
–
+
Front speaker
(R) Center speaker Front speaker (L)
Black tube (–) Red tube (+)
Color tube
Subwoofer
Red Green White
Surround speaker
(R)
Gray Blue
Surround speaker
(L)
continued

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
12GB
model name1[HT-K250]
[4-247-255-11(1)]
To avoid short-circuiting the
speakers
Short-circuiting may damage the speakers and
cause a malfunction.
Make sure the stripped ends of each
speaker cord does not touch the stripped
end of another speaker cord.
Examples of poor conditions of the speaker
cord
Stabilizing speakers
Topreventspeakervibrationor movementwhile
listening, attach the supplied foot pads at the
bottom of the speakers. If you are using the
speaker stand (not supplied), you do not need to
attach them.
Using speaker stand (not
supplied)
When using separately sold speaker stand
(WS-FV10D, WS-WV10D), you can easily
configure your speaker layout.
Installing the satellite
speakers on the wall
Fasten the screws (not supplied) to the wall. The
screws should protrude by 5 to 6 mm.
Attach the speaker adaptor for wall use
(supplied) with the screw (supplied), then hang
the satellite speakers on the screws.
Notes
• Use the screws that matches the wall material and
strength.
• Installthe satellitespeakerson averticaland flatwall
where reinforcement is applied. Do not install the
satellite speakers if the wall is not vertical, flat or
strong enough.
• Contact a screw shop or installer regarding the wall
material or screws to be used.
• Sony will refrain from any responsibility on the
accident or damage caused by improper installation,
lack of durability of the wall or screws improper
operation, natural calamity, etc.
WS-FV10D
5 to 6 mm
4.2 mm
9.2 mm
speaker adaptor for wall use
WS-WV10D
(Wall use)

Getting Started
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
13GB
model name1[HT-K250]
[4-247-255-11(1)]
You can use the control center in an upright
position or laid flat. When using in an upright
position, be sure to attach the supplied control
center stand. Besides, you can change the item
layout in the display according to the layout of
the control center (page 18).
Using the control center in
the upright position
Attach the stand to the screw hole on the
side of the control center using the
supplied screw.
Notes
• Be sure to attach the stand when using the control
center in the upright position.
• Use the supplied stand only when you use the control
center in an upright position. Do not attach the stand
when you use the control center laid flat.
• To move the control center, hold the control center
itself. If you hold the stand, it may break.
• Do not use the control center in an upright position
without attaching the stand. If you do not attach the
stand, the control center will be unstable and may fall
over.
• Be sure to keep the screws out of reach of the
children.
Using the control center laid
flat
Place the control center flat on a level
surface.
8: Attaching the stand
m

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
14GB
model name1[HT-K250]
[4-247-255-11(1)]
After connecting the components, connect the
AC power cord of the subwoofer to a wall outlet. Performing initial setup
operations
Before using the system for the first time,
initialize the system by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
1Press ?/1 to turn off the system.
2Hold down ?/1 until “INITIAL” appears
in the display.
The current input name appears.
The following are reset to their factory
settings.
• All settings in the SET UP and LEVEL
and EFFECT menus.
• The sound field memorized for each
input.
• All preset stations.
Besides, the volume is set to minimum
(MIN).
9: Connecting the AC
power cord
CONTROL
b
AC power cord
To a wall outlet
Subwoofer
Checking the connections
and settings
?/1

Getting Started
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB03CON_HT-K250_CEL.fm]
15GB
model name1[HT-K250]
[4-247-255-11(1)]
Checking if the sound comes
from all speakers
.
1Press MASTER VOL +.
(Optimal volume level: Between 20–30.)
2Press TEST TONE.
You will hear the test tone from each
speaker in sequence.
Front (left) tCenter tFront (right) t
Surround (right) tSurround (left) t
Subwoofer
While outputting the test tone, if no sound
comes from the speakers or the test tone is
output from the speaker whose name is not
displayed in the display, there is a short-
circuitingortheconnection iswrong.Inthis
case, check the speaker connection again.
3Press TEST TONE again to turn off the
test tone.
NX
MUTING
MASTER
VOL
TV VOL TV CH
WIDE TEST TONE
TV/
VIDEO MAIN MENU
x
TOP MENU/
GUIDE
AV MENU
DISPLAY RETURN/EXIT
O
f
F
Gg
ENTER MASTERVOL
TESTTONE

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB04BSC_HT-K250_CEL.fm]
16GB
model name1[HT-K250]
[4-247-255-11(1)]
You can select Sony components only.
1Press one of the function buttons.
When using the control center, press
INPUT SELECTOR repeatedly.
2Turn on the component and start
playback.
When you select a component which is also
connected to the TV (such as VCR or DVD
player), turn on the TV and set the TV’s
video input to match the component you
selected.
3Press MASTER VOL +/– to adjust the
volume.
When using the control center, rotate VOL/
PRESET TUNING.
To mute the sound
Press MUTING.
Playing a DVD on the
connected DVD player (not
supplied)
When you connect a DVD player or “Play
Station 2” and a TV, you can enjoy DVDs.
1Press DVD.
2Select the video input for your TV.
Fordetails,refertotheinstructionssupplied
with your TV.
3Place a DVD in your DVD player or
“Play Station 2”.
4Start playing the DVD.
Listening to the Sound of Connected
Components
Selecting the component
To select Press
DVD player or “Play Station
2” DVD
Satellite tuner SAT
An audio/video component
(CD player, MD deck, etc.) AUX
VCR VIDEO
TV TV
Tuner TUNER

Listening to the Sound of Connected Components
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB04BSC_HT-K250_CEL.fm]
17GB
model name1[HT-K250]
[4-247-255-11(1)]
You can change the item layout in the display according to the layout of the control center (page 18).
Vertical display Horizontal display
AAM: Lights up when an AM station is tuned
in.
BFM: Lights up when an FM station is tuned in.
CMONO: Lights up when receiving an FM
station in monaural mode.
DSTEREO: Lights up when receiving an FM
station in stereo mode.
E:Lights up when the disc being
playedbackcontainsthe LFE(LowFrequency
Effect) channel and when the sound of the
LFE channel signal is actually being
reproduced.
FMEMORY: Lights up when presetting radio
station.
GDTS: Lights up when the system is decoding
DTS signals.
H;DIGITAL: Lights up when the system is
decoding Dolby Digital signals.
I;PL (II): Lights up when the system applies
Pro Logic or Pro Logic (II) processing.
JPlayback channel indicators: The letters
light up to indicate the channels being played
back.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SW (Subwoofer)
The boxes around the letters light up to
indicate the speakers used to playback the
channels.
Example:
Recording format (Front/Surround): 3/2
Sound Field: A.F.D. AUTO.
About the indications in the display
PLII
DTS
SL S SR
L C R
L.F.E.
FM
AM
STEREO
MONO MHz
KHz
MEMORY
SW
DIGITAL
FM
AM
PLII
DTS
SL S SR
L C R
L.F.E.
MONO MHz
KHz
MEMORY
SW
DIGITAL
STEREO
7
25
43
16
089 7
2
5
43
16
098
2
1
21
L.F.E.
SL SR
L C R
SW
continued

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB04BSC_HT-K250_CEL.fm]
18GB
model name1[HT-K250]
[4-247-255-11(1)]
Switching the display
(vertical/horizontal)
Youcanswitch thedisplayasfollows depending
on how you place the control center (page 13).
Press DISPLAY POSITION repeatedly.
Each time you press the button, the display
layout changes.
You can receive FM/AM broadcasts with the
tuner in this system.
Before receiving broadcasts, make sure you
have connected FM and AM antennas to the
receiver (page 9).
Tip
You can tune in the station in 50 kHz steps for
FM band and 9 kHz steps for AM band.
Manual tuning
Use the numeric buttons on the remote to input
the frequency of the station.
1Press TUNER.
You can also use INPUT SELECTOR on
the control center.
2Press TUNER repeatedly to select FM
or AM band.
3Press D.TUNING.
The ALT button lights up.
4Press the numeric buttons to input the
frequency of the station.
Example 1: FM 102.50 MHz
Press 1 t0 t2 t5 t0.
Example 2: AM 1,350 kHz
Press 1 t3 t5 t0.
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
If you cannot tune in a station
and the entered numbers flash
Make sure you have entered the right frequency.
If not, press ALT to turn off the display, then
repeat steps 3 and 4 again. If the entered
numbers still flash, the frequency is not used in
your area.
Tips
• If you do not remember the precise frequency, press
TUNING + or TUNING – after entering the value
close to the frequency you want. The receiver
automatically tunes in the station you want. If the
Receiving FM/AM
broadcasts

Listening to the Sound of Connected Components
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB04BSC_HT-K250_CEL.fm]
19GB
model name1[HT-K250]
[4-247-255-11(1)]
frequency seems to be higher than the entered value,
press TUNING +, and if the frequency seems to be
lower than the entered value, press TUNING –.
• If “STEREO” flashes in the display and the FM
stereo reception is poor, press FM MODE to select
“MONO”. You will not be able to enjoy the stereo
effect, but the sound will be less distorted.
Note
If “STEREO” does not appear at all when an FM
broadcast is received normally, press FM MODE to
turn on the “STEREO” indication.
Automatic tuning
If you don’t know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.
1Press TUNER.
You can also use INPUT SELECTOR on
the control center.
2Press TUNER repeatedly to select FM
or AM band.
3Press TUNING + or TUNING –.
Press TUNING + to scan from low to high;
press TUNING – to scan from high to low.
The receiver stops scanning whenever a
station is received.
4To continue scanning, press TUNING +
or TUNING – again.
If the FM stereo reception is poor
Press FM MODE to select monaural mode.
If “STEREO” flashes in the display and the FM
stereo reception is poor, the sound will be less
distorted in the monaural mode.
Up to 30 FM or AM stations can be preset.
You can tune in any of the stations you preset
directly.
Presetting radio stations
1Press TUNER.
You can also use INPUT SELECTOR on
the control center.
2Tune in the station that you want to
preset using Manual Tuning (page 18)
or Automatic Tuning (page 19).
3Press MEMORY.
The ALT button lights up.
“MEMORY” appears in the display for a
few seconds. Do step 4 before it goes out.
4PressSHIFTtoselectthememorypage
(A, B or C) and press numeric buttons
to select a preset number.
The station is stored to the preset number.
If “MEMORY” goes out before you press
the preset number, start again from step 3.
5Repeat steps 2 to 4 to preset another
station.
Tuning to preset stations
On the control center
1Press VOL/PRESET TUNING.
The preset number flashes.
2Turn VOL/PRESET TUNING to select the
preset number.
Each time you turn VOL/PRESET TUNING,
the receiver tunes in one preset station at a
time, in the corresponding order and direction
as follows:
Presetting radio stations
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
continued

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY HT-
K250\DTP\4247255111\424725511HTK250CEL\01GB04BSC_HT-K250_CEL.fm]
20GB
model name1[HT-K250]
[4-247-255-11(1)]
On the remote
1Press TUNER.
2Press PRESET/CH/D.SKIP + or PRESET/
CH/D.SKIP – to select the preset number.
Tuning directly by entering the
preset number
1Press TUNER.
2Press ALT.
“ALT” appears in the display.
3Press SHIFT to select the memory page (A,
B or C) and press numeric buttons to select
a preset number.