Sony NW-A100TPS User manual

NW-A100TPS/A105/A105HN/A106/A106HN
©2019 Sony Corporation Printed in Malaysia
English
About the manuals
1. Instruction Manual (this manual)
2. 入门指南
“入门指南” describes the following:
• Basic operating instructions of your WALKMAN®
• How to access useful PC applications websites on the internet
3. Help Guide (web document for a PC/smartphone)
The Help Guide contains more detailed operating instructions, specifications
and customer support website URL, etc.
https://rd1.sony.net/help/dmp/nwa100/h_cn/
While browsing is free, you may be charged a communication fee according to
your carrier contract.
Depending on the country/region in which you have purchased your Walkman, some models may not
be available.
Notes for using Walkman
Note for battery
• To prevent deterioration of the battery, charge the battery at least once every 6 months.
Formatting a microSD card
Be sure to read the instructions for microSD cards in the Help Guide on the Internet before you store
content on a microSD card (not supplied).
BLUETOOTH® capabilities
You can listen to music stored on your Walkman from Bluetooth audio devices such as headphones or
speakers. Refer to the “Help Guide” for details on using the Bluetooth function.
Pairing (first time the device is used)
When you connect Bluetooth audio devices wirelessly for the first time, the devices must be registered
to each other. This registration is called “pairing.”
1. Set the Bluetooth audio device to pairing mode. (Refer to the device’s instruction manual.)
2. Swipe upward on the home screen.
3. Tap [Settings] – [Connected devices] – [Pair new device].
4. Select the device from the device list to make the Bluetooth connection.
Connecting (subsequent uses)
1. Turn on the paired Bluetooth audio device and set it to standby.
2. Swipe upward on the home screen.
3. Tap [Settings] – [Connected devices] – [Connection preferences] – [Bluetooth].
4. Tap the switch to turn on the Bluetooth function.
The connection will be established automatically. If not, go to the next step.
5. Tap [Settings] – [Connected devices] – [Previously connected devices].
6. Select the device from the paired device list to make the Bluetooth connection.
Disconnecting
1. Swipe upward on the home screen.
2. Tap [Settings] – [Connected devices] – [Connection preferences] – [Bluetooth].
3. Tap the switch to turn off the Bluetooth function.
Turning the Bluetooth function on or off
1. Swipe upward on the home screen.
2. Tap [Settings] – [Connected devices] – [Connection preferences] – [Bluetooth].
3. Tap the switch to enable or disable the Bluetooth function.
Turning the NFC function on or off
1. Swipe upward on the home screen.
2. Tap [Settings] – [Connected devices] – [Connection preferences] – [NFC].
3. Tap the switch to enable or disable the NFC function.
Note
• Pairing information is deleted in the following situations. Pair the devices again.
– One or both of the devices are reset to the factory settings.
– Pairing information is deleted from the devices, such as when the devices are repaired.
Wi-Fi (*1) capabilities
The Wi-Fi function allows your Walkman to access the internet, or connect with other devices. Refer to
the “Help Guide” for details on using the Wi-Fi function.
*1 The term “Wi-Fi” indicates certified interoperability with wireless LAN devices.
Connecting
1. Swipe upward on the home screen.
2. Tap [Settings] – [Network & internet] – [Wi-Fi].
3. Tap the switch to turn on the Wi-Fi function.
All discovered Wi-Fi networks will be displayed.
4. Select a Wi-Fi network from the list to make the connection.
If required, enter the password.
Disconnecting
1. Swipe upward on the home screen.
2. Tap [Settings] – [Network & internet] – [Wi-Fi].
3. Tap the switch to turn off the Wi-Fi function.
Turning the Wi-Fi function on or off
1. Swipe upward on the home screen.
2. Tap [Settings] – [Network & internet] – [Wi-Fi].
3. Tap the switch to enable or disable the Wi-Fi function.
Troubleshooting
Your Walkman cannot charge the battery or is not recognized on your computer.
• The USB Type-C cable (supplied) is not connected to a USB connector on your computer properly.
Disconnect the USB Type-C cable, and then reconnect it.
• The charge lamp on the Walkman lights up in orange while the battery is charging, and goes off
when the charging is completed.
• The battery of your Walkman may be depleted. Charge the battery for at least 30 minutes.
• To ensure that your Walkman is recognized by your computer, select [File Transfer] in the [Use USB
for] menu displayed on the Walkman.
If the [Use USB for] menu does not appear, swipe upward on the home screen, and then select
[Settings] - [Connected devices] - [USB].
Compliance & Information
Information on laws and trademarks
You must accept the terms of the End User License Agreement when you use your Walkman for the
first time. To read them again later, swipe upward on the home screen, and tap [Settings] – [System] –
[About device] – [Legal information] – [End user license agreement].
• For information on laws, regulations, and trademark rights, refer to “Important Information” in the
internal memory of your unit. To read it, copy the [Important_Information] file to your computer, and
follow the steps below.
Double-click the [Important_Information] file. Then, select a language.
• Google, Android and other marks are trademarks of Google LLC.
• The N-Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in
other countries.
About the in-ear headphones
• When you use in-ear headphones with a high degree of adhesion, note the following. Otherwise,
you may damage your ears or eardrums.
– Do not insert the earbuds forcefully into your ears.
– Do not remove the earbuds from your ears suddenly. When you take off the headphones, move
the earbuds up and down gently.
About the headphones
• Avoid playing the unit at so loud a volume that extended play might affect your hearing.
• At a high volume outside sounds may become inaudible. Avoid listening to the unit in situations
where hearing must not be impaired, for example, while driving or cycling.
• As the headphones are of open-air design, sounds go out through the headphones. Remember not
to disturb those close to you.
Design and specifications are subject to change without notice.
简体中文
使用产品前请仔细阅读本使用说明书，并请妥善保管
请勿把本机安装在书橱或嵌入墙壁的机架内。
请勿将电池（安装的电池组或多个电池）长时间暴露在直射阳光、
火焰或类似的过热热源附近。
关于手册
1. 说明书手册(本手册)
2. 入门指南
入门指南描述下列内容：
• 您的WALKMAN® 的基本使用说明
• 如何访问互联网上有用的电脑应用程序网站
3. 帮助指南(电脑/智能手机用网络文档)
帮助指南包含更详细的使用说明、规格和客户支持
网站URL等。
https://rd1.sony.net/help/dmp/nwa100/h_cn/
虽然浏览是免费的，但根据您的运营商合同，您可
能会被收取通信费。
根据您购买Walkman的国家/地区的不同，可能不提供某些型号。
有关使用Walkman的注意事项
有关电池的注意事项
• 为防止电池性能降低，请每六个月对电池至少充电一次。
格式化microSD卡
在microSD卡（不提供）上存储内容之前，请务必阅读互联网上帮助
指南中有关microSD卡的说明。
BLUETOOTH®功能
可以从耳机或扬声器等Bluetooth音频设备收听存储在Walkman上的
音乐。有关使用Bluetooth功能的详细信息，请参阅“帮助指南”。
配对（首次使用设备时）
当您第一次无线连接Bluetooth音频设备时，必须互相注册设备。此
注册被称为“配对”。
1. 将Bluetooth音频设备设置为配对模式。（参阅设备的说明书手
册 。）
2. 在主屏幕上向上滑动。
3 . 点 击［设置］–［已连接的设备］–［与新设备配对］。
4. 从设备列表中选择设备进行Bluetooth连接。
5-006-019-51(4)
Digital Media Player / 多媒体播放器
出版日期 ：
2019 年 9 月
Instruction Manual GB
说明书手册 CS

关于入耳式耳机
• 当您使用高度贴合的入耳式耳机时，请注意以下事项。否则可能
会损坏耳朵或耳鼓。
– 不要将耳塞强行插入到耳中。
– 不要从耳中猛然取出耳塞。当您取下耳机时，请轻轻地上下移
动耳塞。
额定电流 2.0 A
锂电池不可更换，如电池损坏, 请联系专业人员。
也可以连接适用本型号的Sony USB充电交流电源适配器（另购）对电
池进行充电。
关于耳机
• 避免以高音量播放设备，否则长时间播放可能会影响听力。
• 室外使用高音量可能会导致听不到周围的声音。在听力不可受到
影响的情况下，如开车或骑车时，请勿收听设备。
• 由于耳机是设计成可在户外使用的，声音会透过耳机传到外面来。
请注意不要打扰周围的人。
无线功能
频率范围： 2400 - 2483.5 MHz
5150 - 5350 MHz
5725 - 5850 MHz
13.56 MHz
发射功率： ≤ 20 dBm (EIRP) [2400 - 2483.5 MHz]
≤ 20 dBm (EIRP) [5150 - 5350 MHz]
≤ 33 dBm (EIRP) [5725 - 5850 MHz]
≤ 42 dBμA/m （10 米处场强，准峰值） [13.56 MHz]
不得擅自更改发射频率、加大发射功率（包括额外加装射频功率放大
器），不得擅自外接天线或改用其它发射天线。
使用时不得对各种合法的无线电业务产生有害干扰。一旦发现有
干
扰现象时，应立即停止使用，并采取措施消除干扰后方可继续使 用。
使用微功率无线电设备，必须忍受各种无线电业务的干扰或工业、
科学及医疗应用设备的辐射干扰。
不得在飞机和机场附近使用。
该频段的无线接入系统仅限室内使用,且距离同频段的卫星无线电测
定（空对地）业务和卫星固定（空对地）业务的地球站大于3km。
使用GPS功能时，必须遵守当地的相关法律。
设计和规格如有变更，恕不另行通知。
中国大陆地区的用户
制造商：索尼公司
总经销商：索尼（中国）有限公司
地址： 北京市朝阳区太阳宫中路12号楼冠城大厦701
原产地：马来西亚
连接（后续使用时）
1. 打开已配对的Bluetooth音频设备并将其设为待机状态。
2. 在主屏幕上向上滑动。
3 . 点 击［设置］–［已连接的设备］–［连接偏好设置］–［蓝牙］。
4. 点击开关打开Bluetooth功能。
连接将自动建立。如果没有建立，请进到下一步。
5 . 点 击［设置］–［已连接的设备］–［之前连接的设备］。
6. 从已配对设备列表中选择设备进行Bluetooth连接。
断开连接
1. 在主屏幕上向上滑动。
2 . 点 击［设置］–［已连接的设备］–［连接偏好设置］–［蓝牙］。
3. 点击开关关闭Bluetooth功能。
打开或关闭Bluetooth功能
1. 在主屏幕上向上滑动。
2 . 点 击［设置］–［已连接的设备］–［连接偏好设置］–［蓝牙］。
3. 点击开关以启用或禁用Bluetooth功能。
打开或关闭NFC功能
1. 在主屏幕上向上滑动。
2 . 点 击［设置］ –［已连接的设备］ –［连接偏好设置］ –［N F C］。
3. 点击开关以启用或禁用NFC功能。
注意
• 在下列情况时，配对信息将被删除。请重新配对设备。
– 设备中一个或两个都重置为出厂设定。
– 配对信息被从设备删除，例如设备维修过时。
W L A N（* 1）功 能
WLAN功能允许您的Walkman访问互联网或与其他设备连接。有关使
用WLAN功能的详细信息，请参阅“帮助指南”。
*1 术语“WLAN”指与无线LAN设备的认证互操作功能。
连接
1. 在主屏幕上向上滑动。
2 . 点 击［设置］–［网络和互联网］–［W L A N］。
3. 点击开关打开WLAN功能。
将显示所有发现的WLAN网络。
4. 从列表中选择一个WLAN网络以建立连接。
如果需要，请输入密码。
断开连接
1. 在主屏幕上向上滑动。
2 . 点 击［设置］–［网络和互联网］–［W L A N］。
3. 点击开关关闭WLAN功能。
打开或关闭WLAN功能
1. 在主屏幕上向上滑动。
2 . 点 击［设置］–［网络和互联网］–［W L A N］。
3. 点击开关以启用或禁用WLAN功能。
问题排解
Walkman无法对电池充电或被电脑识别。
• USB Type-C连接线（提供）未正确连接到电脑的USB接口。断开USB
Type-C连接线，然后再重新连接。
• 电池充电期间Walkman上的充电指示灯以橙色点亮，当充电结束
时熄灭。
• Walkman的电池可能耗尽。请给电池充电至少30分钟。
• 要确保Walkman能够被电脑识别，请在Walkman上显示的［USB 的
用途］菜单中选择［文件传输］。
如果未出现［USB 的用途］菜单，请在主屏幕上向上滑动，然后选
择［设 置］ - ［已 连 接 的 设 备］ - ［U S B］。
合规性和信息
有关法律和商标的信息
首次使用Walkman时，您必须接受最终用户许可协议的条款。要稍
后再次阅读它们，请在主屏幕上向上滑动，然后点击［设置］–
［系统］–［关于设备］–［法律信息］–［最终用户许可协议］。
• 有关法律、法规和商标权的信息，请参阅本机内部存储器中的“重
要信息”。要阅读它，请将［Important_Information］文件复制到电
脑，并按照以下步骤操作。
双击［Important_Information］文件。然后，选择一种语言。
• Google、谷歌、Android和其他标记是Google LLC.的商标。
• N标记是NFC Forum, Inc.在美国和其他国家的商标或注册商标。