Specications (tentative)
LMD-4251TD LMD-2451TD
Left eye Right eye
Left signal
on even lines Right signal
on odd lines
L
L
R
L
R
RLCD panel
Polarizer
Patterned retarder
Left eye Right eye
Circular polarizer
glasses
Right-signal on odd lines
(Clockwise)
Left-signal on even lines
(Counter-clockwise) L
RR
L
Principle of 3D Circular polarizer 3D Signal processing
Features (tentative)
• High-resolution full HD professional monitors
LMD-4251TD: 1920 x 1080 pixel resolution
LMD-2451TD: 1920 x 1200 pixel resolution
• Micro-polarizer 3D lter
• Circular polarizer 3D glasses
• Wide viewing angle achieved with an IPS panel
• ChromaTRU color matching technology
• Consistent quality, functionality, and operability –
essential for professional monitors
• Dual stream HD-SDI support*
• Both 3D monitors can be used as 2D monitors,
and their features are compatible with those of
current LMD-50/51W Series monitors
* An optional BKM input adaptor is required.
3D Signal Formats (tentative)*1
• 3D signals on 3G-SDI (Level B)*2
• Dual stream HD-SDI: 1080/60i, 50i, 24PsF, 720/60p,
or 720/50p*2
• Field sequential HD-SDI: 1080/30PsF, 25PsF, or 24PsF *2
• DVI: Line-by-line 1920 x 1080/60p, 50p
*1 All 3D signals are displayed on screen pixel-to-pixel.
*2 An optional BKM input adaptor is required.
LMD-4251TD LMD-2451TD
Picture Performance
Type a-Si TFT Active Matrix LCD a-Si TFT Active Matrix LCD
Resolution 1920 x 1080 pixels (Full HD) 1920 x 1200 pixels (WUXGA)
Effective Picture Size (H x W)
(Diagonal)
36 3/4 x 20 3/4 inches (930 x 523 mm)
Approx. 42 inches (1067 mm)
20 1/2 × 12 7/8 inches (518.4 × 324.0 mm)
24 1/4 inches (613.2 mm)
Aspect 16:9 16:10
Colors Approx. 16.7 million colors Approx. 16.7 million colors
Viewing Angle TBA TBA
Input
Composite BNC (x1) BNC (x1)
Y/C Mini DIN 4-pin (x1) Mini DIN 4-pin (x1)
RGB, Component BNC (x3) BNC (x3)
DVI-D DVI-D (x1)
TMDS single link
DVI-D (x1)
TMDS single link
HD15 D-sub 15-pin (x1) D-sub 15-pin (x1)
Audio Phono jack (x2) (L, R) Phono jack (x2) (L, R)
External Sync BNC (x1) BNC (x1)
Option slot 2 slots 2 slots
Parallel remote Modular connector 8-pin (x1)
(Pin-assignable)
Modular connector 8-pin (x1)
(Pin-assignable)
Seiral remote D-sub 9-pin (RS-232C) (x1),
RJ-45 modular connector (Ethernet) (x1)
D-sub 9-pin (RS-232C) (x1),
RJ-45 modular connector (Ethernet) (x1)
DC in – DC 24 V
Output
Composite BNC (x1) BNC (x1)
Y/C Mini DIN 4-pin (x1) Mini DIN 4-pin (x1)
RGB, Component BNC (x3) BNC (x3)
External Sync BNC (x1) BNC (x1)
Audio monitor out Phono jack x 2 (L, R) Phono jack x 2 (L, R)
Speaker (Built-in) 1.0 W + 1.0 W (stereo) 1.0 W + 1.0 W (stereo)
General
Power Requirement AC 100 V to 240 V, 50/60 Hz AC 100 V to 240 V, 50/60 Hz
DC 24 V
Dimensions
(W x H x D)
40 3/8 x 24 1/4 x 5 inches
(1027 x 616 x 130 mm)
23 3/4 x 19 5/8 x 10 3/4 inches
(602.4 x 497.9 x 269.9 mm)
Weight TBA TBA
Supplied accessories TBA TBA
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/professional
DI-0197 (MK10682V1)
©2010 Sony Electronics Inc. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specications are subject to change without notice.
The values for mass and dimension are approximate.
Sony, ‘make.believe’, LUMA, ChromaTRU and
their respective logos are trademarks of Sony.
All other trademarks are the properties of their respective owners.
Printed in USA (7/10)
SONY56538_LMD-TD.indd 2 8/10/10 11:16 AM
