Sony SDM-S74 User manual

SDM-S74/S74E/S94
US Model
Canadian Model
AEP Model
Chinese Model
TFT LCD COLOR COMPUTER DISPLAY
SERVICE MANUAL

– 2 –
SDM-S74/S74E/S94 (E)
There are some different LCD panels are used in the model SDM-S74/S94
.
Therefore the repair parts are also different
.
Please confirm the serial number before repairing.
LGE
Model name Colour Main destination CMO:L05 AUO FUJITSU
SDM-S74(TCO'99) GRAY AEP 1,720,001 -1,730,000 1,730,001 -1,740,000
SDM-S74(TCO'03) GRAY AEP 3,350,001 -3,380,000 3,380,001 -3,500,000
SDM-S74(TCO'99) SILVER AEP 1,787,001 -1,793,000 1,793,001 -1,800,000
SDM-S74(TCO'03) SILVER AEP 6,280,001 -6,400,000
SDM-S74(TCO'99) BLACK AEP 3,700,001 -3,730,000 3,730,001 -3,900,000
SDM-S74 GRAY U/C 3,320,001 -3,350,000 3,200,001 -3,320,000
SDM-S74(TCO'99) SILVER U/C 6,000,001 -6,080,000 6,080,001 -6,200,000
SDM-S74(TCO'99) BLACK U/C 3,670,001 -3,700,000 3,500,001 -3,670,000
SDM-S74(TCO'99) GRAY CH 6,630,001 -6,642,000 6,642,001 -6,660,000
SDM-S74(TCO'99) BLACK CH 6,850,001 -6,858,000 6,858,001 -6,870,000
SDM-S94(TCO'99) GRAY AEP 1,720,001 -1,724,000 1,732,001 -1,740,000 1,724,001 -1,732,000
SDM-S94(TCO'99) SILVER AEP 1,787,001 -1,789,600 1,794,801 -1,800,000 1,789,601 -1,794,800
SDM-S94(TCO'03) GRAY AEP 3,350,001 -3,380,000 3,440,001 -3,500,000 3,380,001 -3,440,000
SDM-S94(TCO'03) SILVER AEP 6,200,001 -6,240,000 6,320,001 -6,400,000 6,240,001 -6,320,000
SDM-S94 BLACK AEP 3,700,001 -3,740,000 3,820,001 -3,900,000 3,740,001 -3,820,000
SDM-S94 GRAY U/C 3,260,001 -3,290,000 3,290,001 -3,350,000 3,200,001 -3,260,000
SDM-S94 BLACK U/C 3,580,001 -3,620,000 3,620,001 -3,700,000 3,500,001 -3,580,000
SDM-S94 SILVER U/C 6,000,001 -6,040,000 6,120,001 -6,200,000 6,040,001 -6,120,000
SDM-S94 GRAY CH 6,630,001 -6,636,000 6,648,001 -6,660,000 6,636,001 -6,648,000
SDM-S94 BLACK CH 6,850,001 -6,854,000 6,862,001 -6,870,000 6,854,001 -6,862,000
Model name Colour Main destination CMO AUO
SDM-S74(TCO'99) BLACK AEP 1,530,001 -1,550,000 1,500,001 -1,530,000
SDM-S74(TCO'99) SILVER AEP 0,750,001 -0,760,000 0,730,001 -0,750,000
SDM-S74(TCO'03) SILVER AEP 0,700,001 -0,730,000 0,650,001 -0,700,000
SDM-S74(TCO'99) BLACK U/C 1,460,001 -1,500,000 1,400,001 -1,460,000
SDM-S74(TCO'99) SILVER U/C 1,586,001 -1,600,000 1,560,001 -1,586,000
SDM-S74E BLACK AEP 1,530,001 -1,550,000 1,500,001 -1,530,000
SDM-S74E SILVER AEP 0,700,001 -0,730,000 0,650,001 -0,700,000
TPV

– 3 –
SDM-S74/S74E/S94 (E)
1. LCD CHARACTERISTICS
Type : TFT Color LCD Module
Size : 17 inch (SDM-S74/E)
19 inch (SDM-S94)
Pixel Pitch :
0.264 (H) x 0.264 (V)
(SDM-S74/E)
0.294 (H) x 0.294 (V) (SDM-S94)
Color Depth : 16.2M colors (SDM-S74/E)
16.7M colors (SDM-S94)
Electrical Interface : LVDS
Surface Treatment : Haze 25%, Hard-coating(3H)
Operating Mode : Normally White (SDM-S74/E)
Black (SDM-S94)
Backlight Unit : Top/Bottom edge side 4-CCFL
(Cold Cathode Fluorescent Lamp)
2. OPTICAL CHARACTERISTICS
2-1. Viewing Angle by Contrast Ratio
≥ 10
(SDM-S74)
Left : -60°min., -70°(Typ) Right : +60°min., +70°(Typ)
Top :+45°min., +60°(Typ) Bottom : -45°min., -60°(Typ)
(SDM-S94)
Left : -85°min. Right : +85°min.
Top :+85°min. Bottom : -85°min.
2-2. Luminance : 250(min), 300(Typ) (SDM-S74/E)
: 240(min), 300(Typ) (SDM-S94)
2-3. Contrast Ratio : 250(min), 450(Typ) (SDM-S74/E)
: 400(min), 700(Typ) (SDM-S94)
3. SIGNAL (Refer to the Timing Chart)
3-1. Sync Signal
• Type : Separate Sync,
SOG (Sync On Green)
Composite Sync, Digital
3-2. Video Input Signal
1) Type : R, G, B Analog
2) Voltage Level : 0~0.71 V
a) Color 0, 0 : 0 Vp-p
b) Color 7, 0 : 0.467 Vp-p
c) Color 15, 0 : 0.714 Vp-p
3) Input Impedance : 75 Ω
3-3. Operating Frequency
Horizontal : 28 ~ 80kHz (Digital: ~64kHz)
Ver tical : 48 ~ 75Hz (Digital: ~60Hz)
4
.Max. Resolution
Analog : 1280 x 1024 / 75Hz
DVI Analog/ Digital : 1280 x 1024 / 60Hz
5. POWER SUPPLY
5-1. Power
: AC 100~240V, 50/60Hz , 1.0A
5-2. Power Consumption
6. ENVIRONMENT
6-1. Operating Temperature: 5°C~35°C
6-2. Relative Humidity : 10%~80%
7. DIMENSIONS (with TILT/SWIVEL)
(SDM-S74/E)
Width : 367mm (14.45'')
Depth : 215 mm (8.46'')
Height : 410 mm (16.14'')
(SDM-S94)
Width : 412mm (16.22'')
Depth : 234 mm (9.21'')
Height : 445 mm (17.51'')
8. WEIGHT (with TILT/SWIVEL)
(SDM-S74/E)
Net. Weight : 5.7kg (12.56 lbs)
Gross Weight : 8.3kg (18.30 lbs)
(SDM-S94)
Net. Weight : 7.1kg (15.65 lbs)
Gross Weight : 9.4kg (20.72 lbs)
CONTENTS
SPECIFICATIONS
SPECIFICATIONS ................................................... 3
PRECAUTION .......................................................... 5
TIMING CHART ....................................................... 5
OPERATING INSTRUCTIONS ................................ 7
DISASSEMBLY ....................................................... 8
ADJUSTMENT ...................................................... 10
EXPLODED VIEW ...................................................11
less then 1W
less then 0W
less then 1.2W less then 1.0W
240V/50Hz 100V/60Hz
MODE
POWER ON (NORMAL)
STAND-BY
SUSPEND
DPMS OFF
POWER S/W OFF
AC POWER OFF
H/V SYNC
ON/ON
ON/OFF
-
-
VIDEO
ACTIVE
OFF
-
-
POWER CONSUMPTION
less than 45 W (SDM-S74/E)
less than 50 W (SDM-S94)
LED COLOR
GREEN
AMBER
RED
OFF

– 4 –
SDM-S74/S74E/S94 (E)
Signal Connector Pin Assignment
Pin Signal (DVI-D)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
T. M. D. S. Data2-
T. M. D. S. Data2+
T. M. D. S. Data2/4 Shield
T. M. D. S. Data4-
T. M. D. S. Data4+
DDC Clock
DDC Data
Analog Vertical Sync.
T. M. D. S. Data1-
T. M. D. S. Data1+
T. M. D. S. Data1/3 Shield
T. M. D. S. Data3-
T. M. D. S. Data3+
+5V Power
Ground
(return for +5V,
H. Sync. and V. Sync.)
Pin Signal (DVI-D)
18
9
17 24
16
C1
C4
C3
C2
C5
16
17
18
19
20
21
22
23
24
Hot Plug Detect
T. M. D. S. Data0-
T. M. D. S. Data0+
T. M. D. S. Data0/5 Shield
T. M. D. S. Data5-
T. M. D. S. Data5+
T. M. D. S. Clock Shield
T. M. D. S. Clock+
T. M. D. S. Clock-
T. M. D. S. (Transition Minimized Differential Signaling)
• DVI-D Connector (Digital)

– 5 –
SDM-S74/S74E/S94 (E)
PRECAUTION
WARNING FOR THE SAFETY-RELATED COMPONENT.
•There are some special components used in LCD
monitor that are important for safety.
These parts are
marked on the schematic diagram and the
replacement parts list.
It is essential that these critical
parts should be replaced with the manufacturer’s
specified parts to prevent electric shock, fire or other
hazard.
•Do not modify original design without obtaining written
permission from manufacturer or you will void the
original parts and labor guarantee.
TAKE CARE DURING HANDLING THE LCD MODULE
WITH BACKLIGHT UNIT.
•Must mount the module using mounting holes arranged
in four corners.
•Do not press on the panel, edge of the frame strongly
or electric shock as this will result in damage to the
screen.
•Donot scratch or press on the panel with any sharp
objects, such as pencil or pen as this may result in
damage to the panel.
•Protect the module from the ESD as it may damage the
electronic circuit (C-MOS).
•Make certain that treatment person’s body are
grounded through wrist band.
•Do not leave the module in high temperature and in
areas of high humidity for a long time.
• The module not be exposed to the direct sunlight.
•Avoid contact with water as it may a short circuit within
the module.
•If the surface of panel become dirty, please wipe it off
with a softmaterial. (Cleaning with a dirty or rough cloth
may damage the panel.)
WARNING
BE CAREFUL ELECTRIC SHOCK !
•If you want to replace with the new backlight (CCFL) or
inverter circuit, must disconnect the AC adapter
because high voltage appears at inverter circuit about
650Vrms.
•Handle with care wires or connectors of the inverter
circuit. If the wires are pressed cause short and may
burn or take fire.
TIMING CHART
VIDEO
SYNC
B
D
C
F
E
A
CAUTION
Please use only a plastic screwdriver to protect yourself
from shock hazard during service operation.

– 6 –
SDM-S74/S74E/S94 (E)
Mode H/V
Sort
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
720x400
70Hz
H– 35.00 864 640 64 64 96 224
V– 66.667Hz 525 480 3 3 39 45
640x480
60Hz
H– 37.50 840 640 16 64 120 200
V– 75.0Hz 500 480 1 3 16 20
640x480
65Hz
H– 31.500 900 720 18 108 54 180
V+ 70.156Hz 449 400 12 3 34 49
640x480
75Hz
H– 35.162 896 720 34 40 102 176
V– 59.901Hz 587 480 12 2 93 107
720x480
60Hz
H+- 35.156 1024 800 24 72 128 224
V+ 56.250Hz 625 600 1 2 22 25
800x600
56Hz
H+ 37.879 1056 800 40 128 88 256
V+ 60.317Hz 628 600 1 4 23 28
800x600
60Hz
H+ 48.077 1040 800 56 120 64 240
V+ 72.188Hz 666 600 37 6 23 66
800x600
72Hz
H+ 46.875 1056 800 16 80 160 256
V+ 75.0Hz 625 600 1 3 21 25
800x600
75Hz
H– 49.727 1152 832 32 64 224 320
V– 74.553Hz 667 624 3 3 37 43
832x624
(MAC16”)
75Hz
H– 48.363 1344 1024 24 136 160 320
V– 60.004Hz 806 768 3 6 29 38
1024x768
60Hz
H– 56.476 1328 1024 24 136 144 304
V– 70.069Hz 806 768 3 6 29 38
1024x768
70Hz
H+ 60.023 1312 1024 16 96 176 288
V+ 75.029Hz 800 768 1 3 28 32
1024x768
75Hz
H– 60.241 1328 1024 32 96 176 304
V– 74.927Hz 804 768 3 3 30 36
1024x768
(MAC19)
75Hz
H+67.500 1600 1152 64 128 256 448
V+75.000Hz 900 864 1 3 32 36
1152x864
75Hz
H– 68.681 1456 1152 32 128 144 304
V– 75.062Hz 915 870 3 3 39 45
1152x870
(MAC21)
75Hz
H– 61.795 1504 1152 30 128 194 352
V– 65.950Hz 937 900 2 4 31 37
1152x900
66Hz
H– 71.732 1472 1152 16 96 208 320
V– 76.068Hz 943 900 2 8 33 43
1152x900
75Hz
H+ 31.216 1480 1170 37 129 144 310
V+ 50.026Hz 624 584 3 3 34 40
1170x584
50Hz
H+ 60.000 1800 1280 96 112 312 520
V+ 60.000Hz 1000 960 1 3 36 40
1280x960
60Hz
H+ 63.981 1688 1280 48 112 248 408
V+ 60.020Hz 1066 1024 1 3 38 42
1280x1024
60Hz
H+ 79.976 1688 1280 16 144 248 408
V+ 75.025Hz 1066 1024 1 3 38 42
1280x1024
75Hz
Sync
Polarity Frequency
Dot
Clock
Back Porch
(F)
Blanking time
(B)
Resolution
28.350
25.175
30.240
31.500
31.505
36.000
40.000
50.000
49.500
57.285
65.000
75.000
78.750
80.000
108.000
100.000
92.940
105.590
46.200
108.000
108.000
135.000
<< Dot Clock (MHz), Horizontal Frequency (kHz), Vertical Frequency (Hz), Horizontal etc... (µs), Vertical etc... (ms) >>
H– 31.469 800 640 16 96 48 160
V– 59.940Hz 525 480 10 2 33 45
Sync Duration
(D)
Front Porch
(C)
Video Active Time
(A)
Total Period
(E)

– 7 –
SDM-S74/S74E/S94 (E)
REAR VIEW(SDM-S74) REAR VIEW(SDM-S94)
HD15(RGB) input
connector
Main Power Switch
AC IN connector
DVI-D(Digital) input
connector DVI-D(Digital) input
connector
Main Power Switch
AC IN
connector HD15(RGB) input
connector
1. (Power) switch and (power) indicator
This switch turns the monitor on when the power
indicator lights up in red. To turn the monitor off, press
this switch again.
If the power indicator does not light up, press the MAIN
POWER switch.
2. MENU Button
This button turns the menu screen on and off.
3. Buttons
These buttons are used to select the menu items and
make adjustments.
In addition, these buttons switch the Video input signal
between Input 1 and Input 2 when two computers are
connected to the monitor
4. OK Button
This button actives tge selected menu item and
adjustments made using the buttons(3).
5. ECO Button
This button is used to reduce the power consumption.
Front Control Panel
MENU
INPUT
OK
ECO
1
3
4
2
5
OPERATING INSTRUCTIONS

– 8 –
SDM-S74/S74E/S94 (E)
DISASSEMBLY(SDM-S74/E)
1) Please lift the central inside edge of Front bezel
upward with fingertip like picture, then latch will be
departed.
REAR CABINET REMOVEL.
2) Progress to left and lifts bezel furtively and extracts
latch.
3) Progress to right and extracts latch of bezel upper part
by same method.
4) Please pull upper side edge of Rear cabinet outside
with fingertip.
5) Please pull right side edge of Rear cabinet outside with
fingertip.
6) Please pull left side edge of Rear cabinet outside with
fingertip.

– 9 –
SDM-S74/S74E/S94 (E)
DISASSEMBLY(SDM-S94)
REAR CABINET REMOVEL.
2) Progress upward and lifts bezel furtively and extracts
latch.
3) Progress continuously and extracts latch of bezel upper
by same method.
4) Progress continuously and extracts latch of bezel left
by same method.
5) Please pull the Rear cabinet both edge outside with
fingertips like picture, then Rear cabinet will be
departed.
6) If Rear cabinet be departed easily, please pull upside
edge of Rear cabinet outside.
1) Please lift the central inside edge of Front bezel
upward with fingertip like picture then latch will be
departed.

– 10 –
SDM-S74/S74E/S94 (E)
ADJUSTMENT
1. Procedures of how to go to service mode.
1) Enter the service mode of this unit by turning on
the power while pressing and holding the “ r“ key
simultaneously.
2) Press “MENU” key——MAINTAIN.
3) Press “OK” key to enter the service menu.
4) Select the desired function.
5) Press the “MENU” key to exit OSD.
6) Turn off the power and then turn on it again. The
monitor then enters the normal mode.
To enter the service again, repeat the procedure
described above.
Note
W/B readjustment is required after the panel, board
and microcomputer are replaced. However, be sure to
perform aging for more than 30 minutes for RGB reset
before W/B adjustment.
2. Setup
1) Prepare timing and pattern data for a signal
generator according to the Sony timing
specifications.
2) Connect a monitor video cable to the signal
generator.
3) Put Color Analyzer(ex. CA-110) 50cm away from
the monitor, specify it vertically in the center of
the display, and adjust the focus to the optimum
level using an eyepiece.
4) Put the monitor and Color Analyzer(ex. CA-110)
in a light-shielded room.
5) Set up [SERVICE MODE] of the monitor.
3. Operation
Data is manually set to improve the productivity. The
brightness, contrast, and backlight are set to 50, 70
and 100 respectively. After that, the default data of
the color temperature to be adjusted is set.
4. Warm up time
Warm up for 30 minutes before performing any
adjustment.
5. Adjustment for White Balance
a. Display SMPTE at SXGA/60Hz(Input level 0.73mV).
b. Set up [SERVICE MODE].
c. Click “INITIAL EEPROM” and again setup Service
Mode.
d. Click “WHITE BALANCE” and then select “AUTO”.
6. 9300K color adjustment
a. Select “9300K” in “COLOR TEMP” and enter.
b. Use a 35%(89Gray) IRE white video field in the
primary mode.
c. Adjust “SUB CONTRAST “ to secure the color
temperature.
d. Press “MENU” key to exit adjust mode.
7. 6500K color adjustment
a. Select “6500K” in “COLOR TEMP” and enter.
b. Repeat the adjustment procedure as steps b to d
at 9300K.

– 11 – SDM-S74/S74E/S94 (E)
EXPLODED VIEW
1
5
2
3
6
7
8
11
12
9
4
10

– 12 –
SDM-S74/S74E/S94 (E)
Ref. No. Part No. Descri
p
tion
1
X-2021-045-1 BEZEL ASSY
(
Gra
y)
BEZEL ASSY
(
Black
)
BEZEL ASSY
(
Silver
)
1-805-277-11 Panel: M170EN05-V1
(
AU
)
Panel: M170EN05-V5
(
AU
)
Panel: M170E05-L05
(
CMO
)
4-097-375-21 BACK CABINET
(
Gra
y)
BACK CABINET
(
Black
)
BACK CABINET
(
Silver
)
X-4042-062-1 STAND ASSY
(
Gra
y)
STAND ASSY
(
Black
)
STAND ASSY
(
Silver
)
A-1410-269-A H MOUNT
6
4-096-569-01 COVER PIECE POWER SWITCH
(
Gra
y)
COVER PIECE POWER SWITCH
(
Black
)
COVER PIECE POWER SWITCH
(
Silver
)
1-786-624-11 AC SWITCH with connector
8
A-1052-340-A G MOUNT: FSP026-2PI04OA
(
AU
)
G MOUNT: FSP026-2PI03OC
(
SPI
)
(
CMO
)
A-1052-444-A Main board
(
AU
)
V1.1, 9300, except AEP
A-1067-615-A Main board
(
AU
)
V1.1AB, 6500, AEP
A-1055-495-A Main board
(
CMO
)
V1.1, 9300, except AEP
A-1067-616-A Main board
(
CMO
)
V1.1AB, 6500, AEP
10 1-900-275-71 Connector Assy
(
COMMON
)
4-097-396-01 REAR COVER
(
Gra
y)
REAR COVER
(
Black
)
REAR COVER
(
Silver
)
4-097-399-01 ARM COVER
(
REAR
)
(
Gra
y)
ARM COVER
(
REAR
)
(
Black
)
ARM COVER
(
REAR
)
(
Silver
)
4-097-386-01 CABLE HOLDER
ACCESSORIES & PACKING MATERIALS
14 1-827-757-11 D-SUB CABLE
15 1-827-758-11 DVI CABLE
16
1-827-118-11 AC Power Cord
(
U/C
)
AC Power Cord
(
AEP
)
AC Power Cord
(
CH
)
4-102-356-15 CD-ROM
18
19
4-103-139-02 QUICK SETUP GUIDE
(
U/C, CH
QUICK SETUP GUIDE
(
AEP
)
4-094-401-01 PROTECTION BAG
20 4-097-408-01 CUSHION
21
4-103-571-01 INDIVIDUAL CARTON
(
Gra
y)
INDIVIDUAL CARTON
(
Gra
y)
,TCO'03
4-103-572-01 INDIVIDUAL CARTON
(
Black
)
INDIVIDUAL CARTON
(
Silver
)
INDIVIDUAL CARTON
(
Silver
)
, TCO'03
LGE SDM-S74 EXPLODED VIEW PARTS LIST
X-2021-054-1
X-2022-009-1
2Panel: M170EN05-V4
1-805-277-31
1-805-600-21
34-097-375-31
4-097-375-41
4X-4042-065-1
X-2022-011-1
5
4-096-569-11
4-096-569-21
7
A-1415-754-A G MOUNT: FSP026-2PI02
9
11 4-097-396-11
4-097-396-21
12 4-097-399-11
4-097-399-21
13
1-827-120-11
1-827-122-11
17
4-103-139-11
4-103-573-01
2-059-676-01
2-067-031-01
()AU
(CMO)
)

– 13 –
SDM-S74/S74E/S94 (E)
TPV SDM-S74/S74E EXPLODED VIEW PARTS LIST
Ref. No. Part No. Description
X-2022-784-1 BEZEL ASSY (Silver)
1X-2022-787-1 BEZEL ASSY (Black)
X-2022-790-1 BEZEL ASSY (Gray)
21-805-730-11 LCD PANEL (AU)
X-2022-785-1 CABINET ASSY (S74, Silver)
X-2022-788-1 CABINET ASSY (S74, Black)
3X-2022-791-1 CABINET ASSY (S74, Gray)
X-2048-785-1 CABINET ASSY (S74E, Silver)
X-2048-786-1 CABINET ASSY (S74E, Black)
X-2022-786-1 STAND ASSY (S74, Silver)
X-2022-789-1 STAND ASSY (S74, Black)
4X-2022-792-1 STAND ASSY (S74, Gray)
X-2048-789-1 STAND ASSY (S74E, Silver)
X-2048-790-1 STAND ASSY (S74E, Black)
5A-1070-579-A H MOUNT
2-149-811-01 AC SWITCH COVER (Silver)
62-149-811-11 AC SWITCH COVER (Black)
2-149-811-21 AC SWITCH COVER (Gray)
71-786-624-11 AC SWITCH
8A-1070-581-A G MOUNT (for AU)
A-1085-751-A A MOUNT (for AU) for S74, U/C 9300
9N/A A MOUNT (for AU) for S74, AEP 6500
N/A A MOUNT (for AU) for S74E, AEP 6500
10 1-900-283-15 CONNECTOR ASSY
2-149-806-01 REAR COVER (Silver)
11 2-149-806-11 REAR COVER (Black)
2-149-806-21 REAR COVER (Gray)
2-149-809-01 ARM COVER (REAR) (Silver) only S74
12 2-149-809-11 ARM COVER (REAR) (Black) only S74
2-149-809-21 ARM COVER (REAR) (Gray) only S74
2-149-818-01 CABLE HOLDER (S74)
13 2-581-719-01 CABLE CLAMP (S74E, Silver)
2-581-719-11 CABLE CLAMP (S74E, Black)
14 2-581-720-01 STOPPER PIN, only S74E
ACCESSORIES & PACKING MATERIALS
15 1-829-876-11 D-SUB CABLE
16 1-829-855-11 DVI-CABLE
17 1-829-848-11 POWER-SUPPLY CORD SET (U/C)
1-829-849-11 POWER-SUPPLY CORD SET (AEP)
18 2-149-411-04 CD-ROM
2-149-096-02 QUICK SETUP GUIDE (S74, U/C)
19 2-149-096-12 QUICK SETUP GUIDE (S74, AEP)
2-580-338-01 QUICK SETUP GUIDE (S74E, AEP)
20 4-101-643-01 PROTECTION BAG
2-149-820-01 CUSHION (S74, UPPER & BOTTOM)
21 2-149-821-01
2-581-649-01 CUSHION (S74E, UPPER & BOTTOM)
2-581-650-01
2-159-940-01 INDIVIDUAL CARTON (S74, Silver)
2-159-941-01 INDIVIDUAL CARTON (S74, Black)
22 2-159-942-01 INDIVIDUAL CARTON (S74, Silver, TCO’03)
2-580-635-01 INDIVIDUAL CARTON (S74E, Silver, TCO’03)
2-580-636-01 INDIVIDUAL CARTON (S74E, Black)

– 14 –
SDM-S74/S74E/S94 (E)
9-878-243-03
English
2005DR02-1
Made in Japan
© 2005.4
Sony EMCS Corporation
Ichinomiya Tec
SDM-S94 EXPLODED VIEW PARTS LIST
Ref. No. Part No. Description
X-2021-056-1 BEZEL ASSY (Gray)
X-2021-058-1 BEZEL ASSY (Black)
X-2022-012-1 BEZEL ASSY (Silver)
1-805-347-21 LCD PANEL(Fujitsu)
1-805-605-11 LCD PANEL (CMO)
1-805-644-11 LCD PANEL (AU)
4-097-451-21 BACK CABINET (Gray)
4-097-451-31 BACK CABINET (Black)
4-097-451-41 BACK CABINET (Silver)
X-4042-073-1 STAND ASSY (Gray)
X-4042-076-1 STAND ASSY (Black)
X-2022-014-1 STAND ASSY (Silver)
5 A-1410-269-A H MOUNT
4-096-569-01 COVER PIECE POWER SWITCH (Gray)
4-096-569-11 COVER PIECE POWER SWITCH (Black)
4-096-569-21 COVER PIECE POWER SWITCH (Silver)
7 1-786-624-11 AC SWITCH with connector
A-1410-273-A G MOUNT (for Fujitsu)
A-1415-755-A G MOUNT (for CMO)
A-1067-597-A G MOUNT
(
for AU
)
A-1052-635-A A MOUNT (Fujitsu) V1.1, 9300, except AEP
A-1067-618-A A MOUNT (Fujitsu) V1.1T, 6500, AEP
A-1070-668-A A MOUNT (CMO) V1.1, 9300, except AEP
A-1067-620-A A MOUNT (CMO) V1.1AB, 6500, AEP
A-1067-617-A A MOUNT (AU) V1.1, 9300, except AEP
A-1067-619-A A MOUNT (AU) V1.1AB, 6500, AEP
1-900-275-71 CONNECTOR ASSY (Fujitsu, CMO)
1-910-002-92 CONNECTOR ASSY (AU)
4-097-452-01 REAR COVER (Gray)
4-097-452-11 REAR COVER (Black)
4-097-452-21 REAR COVER (Silver)
4-097-454-01 ARM COVER (REAR) (Gray)
4-097-454-11 ARM COVER (REAR) (Black)
4-097-454-21 ARM COVER (REAR) (Silver)
13 4-097-386-01 CABLE HOLDER
14 1-827-757-11 D-SUB CABLE
15 1-827-758-11 DVI CABLE
1-827-118-11 AC Power Cord (U/C)
1-827-120-11 AC Power Cord (AEP)
1-827-122-11 AC Power Cord (CH)
17 4-102-356-15 CD-ROM
4-103-139-02
Q
UICK SETUP GUIDE
(
U/C
)
4-103-139-11
Q
UICK SETUP GUIDE
(
AEP
)
19 4-094-401-01 PROTECTION BAG
20 4-097-462-01 CUSHION
4-103-574-01 INDIVIDUAL CARTON
(
Gra
y)
4-103-576-01 INDIVIDUAL CARTON (Gray),TCO'03
4-103-575-01 INDIVIDUAL CARTON (Black)
2-059-677-01 INDIVIDUAL CARTON (Silver)
2-067-032-01 INDIVIDUAL CARTON (Silver),TCO'03
10
ACCESSORIES & PACKING MATERIALS
16
11
12
21
1
3
4
6
2
8
18
9