
7
SPECIFICATIONS
VPL-FHZ55
Display system 3 LCD system
Display device Size of effective display area 0.76” (19.3 mm) x 3, BrightEra,Aspect ratio: 16:10
Number of pixels 6,912,000 (1920 x 1200 x 3) pixels
Projection lens Zoom Manual (Approx.1.6 x)
Focus Manual
Light source Laser diode
Screen size 40” to 600” (1.02 m to 15.24 m)
Light output 4000 lm
Contrast ratio (full white/full black)*28,000:1
Displayable scanning
frequency*1
Horizontal 14 kHz to 93 kHz
Vertical 47 Hz to 93 Hz
Display resolution Computer signal input Maximum display resolution:1920 x 1200 dots
Panel display resolution: 1920 x 1200 dots
Video signal input NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p
Color system NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N, PAL60
Computer and video
signal input/output
INPUT A RGB / Y PBPRinput connector:5BNC (female)
Audio input connector:Stereo mini jack
INPUT B RGB input connector: Mini D-sub 15-pin (female)
Audio input connector:Stereo mini jack (shared with INPUT C)
INPUT C DVI-D input connector: DVI-D 24-pin (Single link), DVI 1.0-compliant, HDCP support
Audio input connector:Stereo mini jack (shared with INPUT B)
INPUT D*1HDMI input connector: Digital RGB/Y PBPR
Digital audio: PCM (32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz)
S VIDEO IN S video input connector:Mini DIN 4-pin
Audio input connector:Pin jack (x2) (shared with VIDEO IN)
VIDEO IN Video input connector: Phono jack
Audio input connector:Pin jack (x2) (shared with S VIDEO IN)
OUTPUT Monitor output connector:Mini D-sub 15-pin (female)
Audio output connector:Stereo mini jack
Control signal input/output RS-232C connector: D-sub 9-pin (female)
LAN connector: RJ-45, 10BASE-T/100BASE-TX
Control S input connector (DC power supply): Stereo mini jack, Plug in power DC 5 V
Operating temperature (Operating humidity) 32°F to 104°F / 0°C to 40°C (20% to 80%; no condensation)
Storage temperature (Storage humidity) 14°F to +140°F / -10°C to +60°C (20% to 80%)
Power requirements AC 100 V to 240 V, 4.6 A to 1.9 A, 50/60 Hz
Power consumption AC 100 V to 120 V 449 W
AC 220 V to 240 V 426 W
Standby power
requirements
AC 100 V to 120 V 8.5 W (Standby mode: Standard)
0.15 W (Standby mode: Low)
AC 220 V to 240 V 9.5 W (Standby mode: Standard)
0.3 W (Standby mode: Low)
Heat dissipation AC 100 V to 120 V 1528 BTU
AC 220 V to 240 V 1450 BTU
Outside dimensions W 15 11/32 x H 5 13/16 x D 19 11/16 in (W 390 x H 148 x D 500 mm)
W 15 11/32 x H 5 9/32 x D 19 3/16 in (W 390 x H 134 x D 487 mm) (without protrusions)
Weight 25 lb / 11 kg
Supplied accessories RM-PJ19 Remote Commander (1), Size AA (R6) batteries (2),AC Power Cord (1),Cable ties (2), Quick Reference Manual (1),
Security Label (1), Operating Instructions (CD-ROM) (1)
Optional accessories Projector Suspension Support PAM-600
*1 For details, refer to “PRESET SIGNAL CHART” on page 6.
*2 The value is average.
Design and specifications of the unit, including the optional accessories, are subject to change without notice.
This data projector is classified as a CLASS 2 LASER PRODUCT.
(Laser radiation IEC60825-1:2007)