Sony TFM-9450W User manual

TFM-9450W
Instruction for use
SON~

Your TFM-945QW presents you enjoyable FM/AM
broadcasts, which gives big powerful high fidelity
sound.
This circuitry has solid-state ITL (Input Transformerless),
OTL (Output Transformerless) an'd full-tone speaker, therefor
frequency response is high extended and best loudness effect,
And it has blue illumination of dial scale for clear tuning
indication,

CD TUNING KNOB
Turn this knob and tune in your desired FM or AM station.
® VOLUME CONTROL KNOB
Turn this knob clockwise, and the power will be ON with
a slight click and adjust to your desired volume level.
To OFF position, turn this knob counter-clockwise until
you hear a click.
@ TONE CONTROL KNOB
Turn this knob clockwise for treble sound and turn it
counter-clockwise for bass sound.
@ BAND SELECT KNOB
Choose your desired band, FM or AM by using this selector.
If you can have drift-free FM reception, change this switch
to AFC position.
® LOUDNESS SWITCH
When th is switch is set to ON, an equalization network
is switched into the circuit to compensate for the change
in the tonal response of human hearing at low sound levels.
It is automatically disconnected when the amplifier is
operated at high volume levels.
TO INCREASE SENSITIVITY
* For AM reception
This model
has a built-in ferrite bar antenna for maximum
sensitivity. To get the best receiving condition, turn the
set
horizontally until the most favorable sound is obtained.
* For FM reception
This model
uses an AC Iine antenna by setting the metal
with mod·el. If reception is not satisfactory, remove the
metal
fitting from the antenna terminal and connect
external antenna.

SPECI FICATI ONS
Semi-conductors: 11 transistors
Frequency range: FM 87.5 ~ 108MHz
AM 530 ~ 1,605 kHz
Antenna system: FM AC line antenna
can be used external antenna
AM built-in ferrite bar antenna
Power output: 5W (maximum)
3.8W (undistorted)
Power requ irement: AC 120V 60 Hz
Dimentions: 85/a(H) x 14%(W) x 5%"(D)
(220 x 365 x 150 mm)
Weight: 7 Ib 60z (3.35 kg)
Note:
* Keep the set away from extremely high temperature or
excessive moisture.
* Wipe the cabinet with a soft cloth. Never use strong
solvents as thinner or benzine .
• If
you have any inquiry or problem with your set, consult
your nearest SONY dealer or SONY service station.
3-980-119-01
printed in TAIWAN