Sony 630 TVL User manual

D-WDR/3D DNR STANDARD CAMERA
D-WDR / 3D DNR
630 TVL
STANDARD CAMERA
USER’S MANUAL
■
■
Sony 1/3” SuperHAD CCD
High Resolution 630TV Lines
■
■
■
■
■
■
■
■
■
■
D-WDR(Wide Dynamic Range)
3D DNR(Digital Noise Reduction)
LSC(Lens Shading Compensation)
Sens-Up Function(x1024)
Back Light Compensation
Day & Night (ICR-Optional)
Intelligebt Motion Detection
PELCO-D / RS485(Option)
Privacy Mask(Polygonal,8 Colors)
O.S.D menu function
8-001-06
SURVEILLANCE CAMERA
DiGiTAL
DAY
NIGHT

The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
This installation should be made by a qualified service person
and should conform to all local codes.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference
at his own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.

Precaution
Do not install the camera in
extreme temperature conditions.
To avoid malfunctions, never
use the camera close to a gas
or oil leak
Do not Keep the camera face to
strong light directly
Do not disassemble the camera
even if troubles happened
Do not drop the camera or
subject them to physical shocks.
Do not install the camera under
unstable lighting conditions
Do not install or use the camera
in an environment where the
humidity is high
Do not expose the camera to
rain or spill beverage on it.

1. Features
D-WDR(Wide Dynamic Range)
Delivers a powerful Wide Dynamic Range to the camera to provide D-WDR captures
the images at all light levels by correcting GAMMA CURVE. If you use an ordinary
camera in a scene with an intensive backlight, the object will be displayed dark on
the monitor affected by the backlight.To solve this problem, you can use the D-WDR
function to improve the dark part without saturation from bright part.
You can adjust SET LEVEL to get clearer images.
630 TVL ULTRA HIGH RESOLUTION
The horizontal resolution is 630 TV Lines in Color mode and 700 TV Lines in Black/
White mode using a high density CCD. It gives a vivid image output with super
high horizontal resolution using our own De-Mosaic Interpolation algorithm and a
specialised built-in sharpness filter.
3D DNR(Digital Noise Reduction)
Achieves excellent 3D-DNR (3 Dimensional-Digital Noise Reduction)
function very excellently by using upgraded 3D filtering and enables to keep this
function automatically while operating the camera to provide the clear and superior
images in very low light luminance.The SAMRT 3D-DNR will be work automatically if
There is any movement or motion. Also, this can be focus on the object in reduce the
“Ghost Effect”caused by moving object to it self.
Smart IR Function
LSC ( Lens Shading Compensation)
Sens-Up(x1024)
Achieves high quality pictures by supporting a long exposure time - more than
1/50second - and enables recognition of the shape and color of a suspended
object under no light conditions
POLYGONAL PRIVACY MASKING(Polygonal, 8colors)
Ensures privacy protection for private and specific areas on the video signal
output using a polygonal masking function. It allows the size and position of the
masking areas to be controlled very easily, and there are 8 mask areas which are
user programmable - color, brightness and mosaic.
HLC
Enables the recognition of a visible car license plate by blocking unwanted light
sources.
HIGH SENSITIVITY TRUE DAY&NIGHT
The Day & Night function delivers high quality color rendition and converts
automatically into monochrome as luminance levels drop.

2. Components
WDR/3D DNR STANDARD CAMERA
WDR / 3D DNR
STANDARD CAMERA
USER’S MANUAL
WDR/3D DNR
ZeroD efect
High Resolution of 600 TV Lines
Sens Up(x512, DSS)
DIS(Digital Image Stabilization)
Polygonal Privacy Masking
D.Zoom(x1~x10)
Eclipse
High Sensitivity Day&Night
D-WDR/3D DNR Camera
L-Wrench
Manual
SURVEILLANCE CAMERA
DiGiTAL
DAY
NIGHT

3. Names and Functions of Parts
1) Front
①Lens protection cap
Please cover while it is out of use.
②CS-Mount lens adaptor
Please attach the CS-Mount lens here.
③Back Focus clamp screw
Please loosen the clamp screw with a screwdriver before
adjusting the Back focal length.
Mounting bracket screw hole
Please use the screw hole when
fixing the camera onto the
mounting bracket. Please use
the clamp screw as specified in
the picture.
The mounting bracket can be separated and attached
to the top of the camera. In this instance please do not
tighten the screw to a depth of more than 5mm,
otherwise serious damage can influence in the inner parts
of the camera.
4
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)
L
1 2 3 4
SURVEILLANCE CAMERA
DiGiTAL
DAY
NIGHT

2) Back
①Auto iris lens connector
DC12V, DC12V/AC24V AC 220V
This is the connection terminal for auto iris lens.
②Video composite Out
③Power lamp
Light up when the correct power is supplied to the camera.
④Setting button(OSD Joystick)
ENTER button : Use for menu display. This button can
be used to confirm settings after changing the value of the
selected function or current conditions.
UP & DOWN buttons : Use for selecting items by moving
the cursor up or down on the menu screen.
LEFT(L) & RIGHT(R) buttons : Use when changing item values
by moving the cursor to the left or right on the menu screen.
⑤
Power input terminal
RS-485(Oprional)
The camera can be controlled by using external controller
like a remote controller.
Connect to the power appropriate to each power
requirement, 12V DC or 24V AC or 90~240V AC.
13
3
42
5
6
66 13
VIDEO
AC 90~240V
DC IRIS
POWER
2
4
VIDEO
DC IRIS
POWER
+ +
DC 12VRS 485
U
D
LR
U
D
LR
AC 24V
+
RS 485

4. Installation
1) Lens
Lenses are sold separately. Lenses such as auto iris lens,
CS-Mount lens and C-Mount lens can be used.
Note) How to operate this product effectively
• Please keep lens clean
• Any foreign objects and finger marks on the lens can cause
inferior image quality in low light conditions.
①When using an auto iris lens
Please peel off about 8mm of the outer skin of the auto iris
lens cable.
Please peel off about 2mm of the outer skin of the insulated
conductor inside the lens cable.
approx 8mm
approx 2mm
D-WDR(Wide Dynamic Range)
Delivers a powerful Wide Dynamic Range to the camera to provide D-WDR captures
the images at all light levels by correcting GAMMA CURVE. If you use an ordinary
camera in a scene with an intensive backlight, the object will be displayed dark on
the monitor affected by the backlight.To solve this problem, you can use the D-WDR
function to improve the dark part without saturation from bright part.
You can adjust SET LEVEL to get clearer images.
630 TVL ULTRA HIGH RESOLUTION
The horizontal resolution is 630 TV Lines in Color mode and 700 TV Lines in Black/
White mode using a high density CCD. It gives a vivid image output with super
high horizontal resolution using our own De-Mosaic Interpolation algorithm and a
specialised built-in sharpness filter.
3D DNR(Digital Noise Reduction)
Achieves excellent 3D-DNR (3 Dimensional-Digital Noise Reduction)
function very excellently by using upgraded 3D filtering and enables to keep this
function automatically while operating the camera to provide the clear and superior
images in very low light luminance.The SAMRT 3D-DNR will be work automatically if
There is any movement or motion. Also, this can be focus on the object in reduce the
“Ghost Effect”caused by moving object to it self.
Smart IR Function
LSC ( Lens Shading Compensation)
Sens-Up(x1024)
Achieves high quality pictures by supporting a long exposure time - more than
1/50second - and enables recognition of the shape and color of a suspended
object under no light conditions
POLYGONAL PRIVACY MASKING(Polygonal, 8colors)
Ensures privacy protection for private and specific areas on the video signal
output using a polygonal masking function. It allows the size and position of the
masking areas to be controlled very easily, and there are 8 mask areas which are
user programmable - color, brightness and mosaic.
HLC
Enables the recognition of a visible car license plate by blocking unwanted light
sources.
HIGH SENSITIVITY TRUE DAY&NIGHT
The Day & Night function delivers high quality color rendition and converts
automatically into monochrome as luminance levels drop.

Please remove the cover of the auto iris lens connection
plug and solder the lens cable to the connector pin in the plug.
Pin No. LENS
DC
No.1 Pin Damping-
No.2 Pin Damping+
No.3 Pin Drive+
No.4 Pin Drive-
Please fit the auto iris lens connector plug and take off the
lens protection cap, and then attach the auto iris lens to the
camera by screwing it in clockwise.
Please insert the connection plug that is connected to the
auto iris lens cable into the auto iris lens connector, which is
located on the back of the camera.
No. 3 Pin
No. 1 Pin connector
Lens cable
No. 4 Pin
No. 2 Pin
SURVEILLANCE CAMERA
DiGiTAL
DAY
NIGHT

2) Power
* Be sure to connect power only after all installation is complete.
* Please use a power adaptor that meets the required standards.
[Recommended - Voltage : +/-20%, Current : Adapter with
rated power of 2 times(than real using current ]
3) RS485(option)
*The camera can be controlled by using external controllers
like a remote controller.
* Connect the RS485 cable(+, -) to the connection port of the
485 control that is connected to the DVR or
System Controller.
* Use the PELCO-D protocol.
* When controlling RS485, please check the following:
- Communication Speed : 4800 bps
- Data Bit Number : 8 bits
- Stop Bit Number : 1 bit
- Parity Bit : none
②When using a CS-Mount lens
Please take off the lens protection cap and attach the
CS-Mount lens to the camera by screwing it in clockwise.
③When using a C-Mount lens
Please take off the lens protection cap and attach the
C-mount adaptor.
VIDEO
DC IRIS
POWER
+ +
DC 12VRS 485
U
D
LR
AC 24V
Monitor
DVR
RS485 + RS485 -

5. Setup Menu Flow
EXPOSURE LENS DC, MANUAL
AGC OFF,LOW,MID,HIGH
SENSE-UP AUTO, OFF, X2, X4, X8, X16, X32, X64,
X128, X256, X512, X1024
BACK LIGHT OFF
BLC - BLC LEVEL<OFF, LOW, MID, HIGH>
HLC
D-WDR-SET LEVEL<0~20>
3D-DNR OFF, LOW, MID, HIGH, AUTO
RETURN
WHITE BALANCE WB MODE ATW, MANUAL, PUSH
R-Y GAIN
B-Y GAIN
RETURN
DAY&NIGHT D&N MODE AUTO, COLOR, B&W, EXT, EXT2
BURST ON, OFF
C_SUP <0 ~ 100>
S_SUP <0 ~ 100>
SMART IR ON, OFF
RETURN
IMAGE ADJUST MIRROR OFF, MIRROR
SHARPNESS <0~30>
GAMMA 0.45, 0.55, 0.65, USER<0.2 ~ 1.0>
LSC OFF, ON <0 ~ 30>
MONITOR CRT, LCD
RETURN
MOTION MOTION OFF, ON
AREA AREA1 ~ AREA4
SENSITIVITY <1 ~ 30>
DISPLAY OFF, MESSAGE, TRACE
HOLD TIME <0~15>
ALARM OUTPUT OFF, ON
RETURN

PRIVACY MASK1 OFF
ON
DOT SEL
DOT XY
MOVE XY
COLOR SET<1~8>
MASK8 OFF
ON
DOT SEL
DOT XY
MOVE XY
COLOR SET<1~8>
RETURN
SPECIAL LANGUAGE 9 Language
TITLE
COMMUNICATION OFF
ON
ID <0 ~ 255>
BAUD RATE<2400, 4800, 9600>
PROTOCOL<PELCO-D>
DPC OFF, AUTO
FACTORY SET NO, YES
RETURN
EXIT SAVE&EXIT
EXIT
RETURN

6. Special Features
1. D-WDR(Wide Dynamic Range)
D-WDR captures the images at all light levels by correcting GAMMA CURVE.
If you use an ordinary camera in a scene with an intensive backlight,
the object will be displayed dark on the monitor affected by the backlight.
To solve this problem, you can use the D-WDR function to improve the dark
part without saturation from bright part.
You can adjust SET LEVEL to get clearer images.
2. HLC
This function is to mask the bright color.
You can select 4 mask areas and DAY&NIGHT and adjust HLC level.
EXPOSURE
LENS DC
AGC MID
SENS-UP AUTO
BACK LIGHT D-WDR
3D-DNR AUTO
RETURN
D-WDR
SET LEVEL 003
RETURN
EXPOSURE
LENS DC
AGC MID
SENS-UP AUTO
BACK LIGHT HLC
3D-DNR AUTO
RETURN
HLC
HBLC MANUAL
MODE ALL DAY
HLC LEVEL 003
MASK1 ON
MASK2 ON
MASK3 ON
MASK4 ON
RETURN

4. SMART MOTION
With learning capability, it memorizes the previous screen on the
movement of the subject approximately in 3 to 5 seconds. When
there is a change, the alarm function goes off.
3. 3D DNR(Digital Noise Reduction)
Select 3D DNR ON or OFF.
3D-DNR function reduce the background noise in a low luminance
environment. Upgraded 3D filtering ensures even more clear image.
[DNR Level High : Picture image is more clear but Ghost is more increased.
DNR Level Low : Picture image is not clear but less Ghost.]
MAIN MENU
EXPOSURE
WHITE BALANCE
DAY & NIGHT
MOTION
IMAGE ADJUST
PRIVACY
SPECIAL
EXIT
MAIN MENU
EXPOSURE
WHITE BALANCE
DAY & NIGHT
MOTION
IMAGE ADJUST
PRIVACY
SPECIAL
EXIT
MOTION
MOTION
AREA
SENSITIVITY
HOLD TIME
DISPLAY
ALARM OUTPUT
RETURN
ON
003
007
TRACE
OFF
EXPOSURE
LENS DC
AGC MID
SENS-UP AUTO
BACK LIGHT D-WDR
3D-DNR AUTO
RETURN

7. SPECIFICATIONS
C/CS Mount
-20℃~60℃/30% ~80%
-30℃~60℃/20% ~90%
Only DC12V (±20%) Dual AC24V / DC 12V AC 90~240V
61(W) X 55(H) X 106mm(L)
Approx. 0.4kg
Lens
Operating Temperature/Humidity
Storage Temperature/Humidity
Supply Voltage
Dimension
Weight
120mA 80mA / 200mA
Current
1.4W 2W / 2.4W
[Recommended - Voltage : +/-20%, Current :
Adapter with rated power of 2 times(than real using current ]
Power Consumption
Design and specifications are subject to change without notice.
NTSC PAL
Sony 1/3” SuperHAD CCD
768(H) X 494(V) 752(H) X 582(V)
811(H) X 508(V) 795(H) X 596(V)
H/V 15.734/59.94Hz H/V 15.625/50Hz
2:1 Interlace
630 TV Lines (Max.)
0.12Lux(15IRE), 0.2Lux(30IRE), 0.4Lux(50IRE) F1.2
0.0002Lux(15IRE), 0.0005Lux(30IRE), 0.0008Lux(50IRE) F1.2
1.0Vp-p/ 75ohm Video 0.714Vp-p
0.45, 0.55, 0.65, USER
LENS, AGC, SENS-UP, BACK LIGHT(BLC, HLC, D-WDR),
3D-DNR, WHITE BALANCE, DAY & NIGHT
MIRROR, SHARPNESS, GAMMA, MONITOR, LSC,
MOTION, PRIVACY (MASK1 ~MASK8), LANGUAGE
COMMUNICATION, DPC
1/60~1/100,000 1/50~1/100,000
8 Windows(Polygonal, 8 Colors)
AUTO, COLOR, B&W, EXT, EXT2
ON / OFF
AUTO, OFF ~x1024
9 Language
ATW / AWC / MANUAL / PUSH
ON / OFF(WDR LEVEL)
ON / OFF
OFF, LOW, MID, HIGH
ON / OFF
LOW / MIDDLE / HIGH / OFF
TV System
S
Total Pixel
Eective Pixel
ensor
Synchronization
Scanning System
Horizontal Resolution
Min. Illumination
Sens-Up On
Video Output
γ Correction
S/N
O.S.D
Electrical Shutter
Privacy Masking
Day & Night
Motion Detection
Sens-Up(Low Shutter)
Language
White Balance
D-WDR
Smart IR
3D-DNR
HLC
AGC
CRT, LCD
Monitor
ON / OFF
LSC
ON / OFF
MIRROR
More than 52dB(AGC o)

PRODUCT WARRANTY CARD
1) ITEM # :
2) S/N # :
3) INSTALLATION CONDITION
- Indoor  / Outdoor 
- Power supply SPECIFICATION :
DC12V  / AC24V 
CURRENT __________ mA
4) TROUBLESHOOTING
- No picture 
- Bad image 
- No power 
- Water damage 
- LED ON  / OFF 
- ETC.  :
* Please keep this warranty card with the manual.
* Please fill out this warranty card and send us this warranty card
with the faulty units together.
Following cases can be charged even within the warrany period.
a. When defects are caused by user’s carelessness.
b. When improper or unauthorized repairs are done or when the inside is
modified or damaged.
c. Defects caused by natural disaster or power problem.
d. When the warranty card is not filled out or corrected unconfirmed.