Sony SRW5800/2 User manual

HDCAM-SR Workflow Guide
Quantel Digital Intermediate products provide full support for all the
advanced operating modes found in HDCAM-SR™ VTRs. The iQ on-line
finishing system, the Pablo color correction system and Sid, the Stereoscopic
3D finishing system all share the same features to support streamlined
workflows with HDCAM-SR. Real-time dual-link input and output is
standard and all the systems store and process non-compressed signals
for the highest possible quality. Double speed ingest delivers the quickest
possible conforms. Support for 1080/60p and 1080/50p ensures that
whatever the format Quantel owners can handle it and in real time.
Stereo3D is a massive opportunity for everyone and the HDCAM-SR/Quantel
combination delivers a high quality real-time Stereo3D workflow.
To capture material recorded at double-speed:
1. Ensure that the HDCAM-SR VTR is connected to the iQ/Pablo using a dual-link.
2. Set the HDCAM-SR VTR to 422DBL.
3. From the I/O menu box, select the Edit Setups and make sure the correct HDCAM-SR VTR Dual port is selected.
4. From the input format box, select ‘dual x2’.
5. Capture the clip.
To capture material recorded at 1080/60p or 1080/50p:
1. Ensure that the HDCAM-SR VTR is connected to the iQ/Pablo using a dual-link.
2. Set the HDCAM-SR VTR to 1080P mode.
3. From the I/O menu box, select the Edit Setups and make sure the correct HDCAM-SR VTR Dual port is selected.
4. From the input format box, select ‘dual P’.
5. Capture the clip.
iQ 2K, iQ 4K, Pablo 2K, Pablo 4K, Sid V4.0 or later system software.
Stereo 3D ingest requires Stereo3D option on iQ and Pablo
Supported Workflow
Double-speed transfer
Stereoscopic 3D
1080/50p and 1080/60p
Applicable HDCAM-SR VTR
SRW-5800 with HKSR-5803HQ
SRW-5100 with HKSR-5103

©2009 Sony Corporation. All rights reserved.
HDCAM-SR Workflow Guide
To capture material recorded in Stereo 3D:
1. Ensure that the HDCAM-SR VTR is connected to the iQ/Pablo using a dual-link.
2. Set the HDCAM-SR VTR to 422x2.
3. From the I/O menu box, select the Edit Setups and make sure the correct HDCAM-SR VTR Dual port is selected.
4. From the input format box, select ‘stereo’.
5. Capture the clip.
All of the above formats can also be conformed at the appropriate frame rates on the iQ or Pablo by selecting the correct input format as above.
This includes conforming via the Stereo input providing the user with a final stereo conformed clip. To conform a stereo edit ‘stereo’ has to be selected in
the ‘Track List’ view.
Refer to the below link to see live web demos:
http://www.quantel.com/gallery.php?id=ea49443c7c2d7a8b10d0112bedd198b2&pl=0 Contact
Quantel
Phone [phone]
Fax [phone]
Website www.quantel.com
e-mail mark[email protected]
MK10643V1OHB09NOV QTL
Menu Overview for Edit Setup