Sony HCD-F150 - Component For Mhcf150 Administrator Guide

HCD-F150/FR10
US Model
Canadian Model
HCD-F150
AEP Model
UK Model
E Model
Australian Model
HCD-FR10
SERVICE MANUAL
MINI HI-FI COMPONENT SYSTEM
MICROFILM
ManufacturedunderlicensefromDolbyLaboratories
Licensing Corporation.
“DOLBY”andthedouble-Dsymbolaaretrademarks
of Dolby Laboratories Licensing Corporation.
• This set is the tuner, deck, CD
and amplifier section in MHC-F150/FR10.
U.S and foreign patents licensed from Dolby
Laboratories Licensing Corporation.
— Continued on next page —
SPECIFICATIONS
Model Name Using Similar Mechanism HCD-F100/FR1
CD Mechanism Type CDM-46B1
Optical Pick-up Name KSS-213D/Q-NP
Model Name Using Similar Mechanism HCD-GRX5/RX66
TapeTransport Mechanism Type TCM-230AWR1
CD
Section
Tape deck
Section
AUDIO POWER SPECIFICATION:
U.S.A models:
POWER OUTPUTAND TOTAL HARMONIC DISTORTION:
with 8 Ωloads both channels driven, from 70–20,000 Hz; rates 100W
per channel minimum RMS power, with no more than 0.9% total
harmonic distortion from 250 mmW to rated output.
Amplifier section
North American models:
Front Speaker:
Continuous RMS power output 100 + 100 W
(8 Ωat 1 kHz, 10% THD)
Total harmonic distortion less than 0.09%
(8 Ωat 1 kHz, 40W)
Rear Speaker:
Continuous RMS power output 12.5 + 12.5 W
(16 Ωat 1 kHz, 10% THD)
European models:
The follwing measured at AC 230 V, 50 Hz DIN power output (Rated)
50 + 50 W
(8 Ωat 1 kHz, DIN)
Continuous RMS power output (Reference)
60 + 60 W
(8 Ωat 1 kHz, 10% THD)
Other models:
The follwing measured at AC 120/240 V, 50/60 Hz
Continuous RMS power output (Rated)
110 + 110 W
(8 Ωat 1 kHz, 1% THD)
Continuous RMS power output (Reference)
130 + 130 W
(8 Ωat 1 kHz, 10% THD)
Peak music power output (Reference)
1500 W
The follwing measured at AC 110/220 V, 60 Hz
Continuous RMS power output (Rated)
90 + 90 W
(8 Ωat 1 kHz, 1% THD)
Continuous RMS power output (Reference)
110 + 110 W
(8 Ωat 1 kHz, 10% THD)
photo : HCD-F150

HCD-F150/FR10
— 37 — — 38 —
6-6. SCHEMATIC DIAGRAM — BD SECTION — • See page 71 for Waveforms. • See page 72 for IC Pin Functions.

HCD-F150/FR10
— 41 — — 42 —
6-8. SCHEMATIC DIAGRAM — CD MOTOR SECTION —

HCD-F150/FR10
— 45 — — 46 —
6-10. SCHEMATIC DIAGRAM — AUDIO SECTION —
(Page 55)
MAIN BOARD
CN106
P
16

HCD-F150/FR10
— 49 — — 50 —
6-12. SCHEMATIC DIAGRAM — LEAF SW SECTION —
(Page 55)
MAIN BOARD
CN107
Q
16

HCD-F150/FR10
— 53 — — 54 —
6-14. SCHEMATIC DIARGAM — MAIN (1/5) SECTION —
69

HCD-F150/FR10
— 55 — — 56 —
6-15. SCHEMATIC DIARGAM — MAIN (2/5) SECTION — • See page 51 for Printed Wiring Board. • See page 71 for Waveforms. • See page 77 for IC Pin Functions.

HCD-F150/FR10
— 57 — — 58 —
6-16. SCHEMATIC DIARGAM — MAIN (3/5) SECTION — • See page 51 for Printed Wiring Board. • See page 71 for Waveforms. • See page 76 for IC Pin Functions.

HCD-F150/FR10
— 59 — — 60 —
6-17. SCHEMATIC DIARGAM — MAIN (4/5) SECTION — • See page 51 for Printed Wiring Board. • See page 80 for IC Black Diagrams.
70

HCD-F150/FR10
— 61 — — 62 —
6-18. SCHEMATIC DIARGAM — MAIN (5/5) SECTION — • See page 51 for Printed Wiring Board.
70

HCD-F150/FR10
— 65 — — 66 —
6-20. SCHEMATIC DIAGRAM — PANEL SECTION — • See page 80 for IC Black Diagrams.

HCD-F150/FR10
— 69 — — 70 —
6-22. SCHEMATIC DIAGRAM — POWER SECTION —

2.6 Vp-p
16.9344 MHz
5 Vp-p
135 µ s
5 Vp-p
135 µ s
5 Vp-p
230 µ s
2.5 Vp-p
7.8 µ s
0.2 Vp-p
0.5 Vp-p
5 IC601 8(X-OUT)
4.2Vp-p
8MHz
1 IC501 0(X2)
5.5Vp-p
5 MHz
4 IC401 #¡ (EXTAL)
3.6Vp-p
10 MHz
3 IC501 (¡ (CLK-OUT)
5.0Vp-p
32.768 kHz
2 IC501 !£ (XT2)
4.8Vp-p
32.768 kHz
— 71 —
6-23. WAVEFORMS
– MAIN Section – – PANEL Section –
– BD Section –
2IC1012(FEI) (PLAY MODE)
1.3 Vp-p
5IC103^º (XPCK)
3IC101$¶ (TEI) (PLAY MODE)
4IC103@¶ (MDP)
1IC101#£ (RFO) (PLAY MODE)
6IC103^™ (RFCK)
7IC103&¢ (WFCK)
8IC103*ª (XTAI)