
5
GB
Overview of Re ote Control Buttons
Overview
Besides TV functions, all coloured buttons as ell as green symbols are also used for
Teletext operation. For more details, please refer to “Teletext” section of this instruction
manual.
VCR or DVD on/off
Press to s itch your VCR or DVD on or
off.
Selecting channels
If Media Selector is s itched on TV or
VCR, press to select channels.
For double-digit programme numbers,
enter the second digit ithin 2.5 seconds.
Displaying on Screen infor ation
Press to display all on-screen indications.
Press again to cancel.
Selecting Picture ode
Press repeatedly to change the
picture mode.
Selecting sound ode
Press repeatedly to change the
sound mode.
This button only works in Teletext mode.
Selecting TV ode
Press to s itch off teletext or video input.
a) If Media Selector is switched
on TV:
• When MENU is s itched on, use these
buttons to operate the menu system.
For details refer to “Introducing and
Using the Menu System” on page 9.
• When MENU is s itched off, press OK
to sho a channel overvie . Then
press or to select the channel
and then press again the OK button to
atch the selected channel.
b) If Media Selector button is
switched on VCR or DVD:
Using these buttons you can control the
main functions of your VCR or DVD.
Displaying the enu syste
Press to display the menu on the TV
screen. Press again to remove the menu
display from the TV screen.
Adjusting TV volu e
Press to adjust the volume of the TV.
Muting the Sound
Press to mute TV sound. Press again to
restore the sound.
To Te porarily Switch Off TV
Press to temporarily s itch off TV (the standby
indicator on TV lights up). Press again to s itch on
TV from standby mode.
To save energy we recommend
switching off completely when TV is not
in use.
After 15 minutes ithout a signal
and ithout any button being
pressed, the TV s itches
automatically into standby mode.
Selecting input source
Press repeatedly until the desired
input symbol of the source appears on
the TV screen.
a) If Media Selector button is
switched on TV:
Press to atch the last channel selected
( atched for at least 5 seconds).
b) If Media Selector button is
switched on VCR:
For Sony’s VCR double-digit
programme numbers, e.g. 23, press
-/- - first and then the buttons 2
and 3.
Selecting Screen for at
Press repeatedly to change the
format of the screen. For more
details, refer to chapter “Auto
Format” on page 15.
Selecting Teletext
Press to s itch on teletext.
Recording button
If Media Selector is s itched on VCR,
press this button to record
programmes.
Media Selector
With this remote control you can
operate not only this TV but also the
main functions of your VCR or DVD.
S itch on the device you ant to
operate and next press this button
repeatedly to select the VCR, TV or
DVD. A green light ill be lit
momentarily.
An initial set up is required to
synchronise this remote control to
your VCR or DVD. It ill depend on the
Brand of those products. For more
details, refer to chapter “Remote
Control Configuration for VCR or
DVD” on page 20.
Selecting channels
Press to select the next or previous
channel.
03GBKV28/32LS35U.fm Page 5 Thursday, Apr l 5, 2001 9:40 AM