Sophos UTM 120 User manual

Operating Instructions
UTM 110/120

UTM 110/120 Operating Instructions
Foreword
We are pleased to welcome you as a new customer of our Sophos UTM
hardware appliances.
To install and configure the hardware appliance you can use the following
documents:
ÌHardware Quick Start Guide: Connection to the system peripherals in a few
steps
ÌOperating Instructions: Notes on the security and commissioning of the
hardware appliance
ÌAdministration Guide: Installing and configuring the software appliance
The Hardware Quick Start Guide and the Security Notes are also delivered in
printed form together with the hardware appliance. The instructions must be
read carefully prior to using the hardware and should be kept in a safe place.
You may download all user manuals and additional documentation from the
support webpage at: astaro.com/support
Security Symbols
The following symbol and its meaning appears in the Hardware Quick Start
Guide, Security Notes and in these Operating Instructions.
Caution and Important Note. If these notes are not correctly observed:
ÌThis is dangerous to life and the environment
ÌThe appliance may be damaged
ÌThe functions of the appliance will be no longer guaranteed
ÌSophos shall not be liable for damages arising from a failure to comply
with the security notes
Designed Use
The hardware appliances are developed for use in networks. The UTM
110/120 model may be operated as a standalone appliance. The
hardware appliance can be used in commercial, industrial and residential
environments.
The UTM 110/120 model belongs to the appliance group B.
The hardware appliance must be installed pursuant to the current
installation notes. Otherwise failure-free and safe operation cannot be
guaranteed. The EU declaration of conformity is available at the following
address:
Astaro GmbH & Co. KG - a Sophos company
Amalienbadstr. 41/Bau 52
76227 Karlsruhe
Germany

UTM 110/120 Operating Instructions
CE Labeling, FCC and Approvals
The UTM 110/120 appliance complies with FCC Class B, CE, C-Tick, VCCI
and UL.
Important Note: For computer systems to remain CE and FCC compliant,
only CE and FCC compliant parts may be used. Maintaining CE and FCC
compliance also requires proper cable and cabling techniques.
Operating Elements and Connections
Sophos UTM 110/120 (rev.5)
Controls
Power (LED Display)
Green Power on
Green / Yellow Link
Green / Yellow Activity
Yellow Hard drive
LEDs on each Ethernet connector (Speed LED: left, Act/Link LED: right)
Act/Link Green Constantly
1. The Ethernet port is receiving power.
2. Good connection between the Ethernet
port and hub.
Off
1. The adapter and switch are
not receiving power.
2. No connection between both
ends of the network.
3. Network drivers have not been loaded
or do not function correctly.
Flashing
The adapter is sending or receiving network
data. The frequency of the flashes varies with
the amount of traffic.
Speed Yellow On Operating at 1000 Mbps
Green On Operating at 100 Mbps
Off Operating at 10 Mbps if Act/Link is on
LED: data
activity link
LED: data
activity link
VGA power
switch
COM
2 x USB 4 x 10/100/1000
Base-TX ports

UTM 110/120 Operating Instructions
6. Putting into Operation
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose
of used batteries according to the instructions.
Scope of Supply
The supplied parts are indicated in the Hardware Quick Start Guide.
Mounting Instructions
The hardware model UTM 110/120 can be placed on a stable horizontal
surface or can be mounted on the wall. Screws are not included in delivery.
Use only screws that fit the mounting holes on the bottom side.
To mount the appliance to the rack you need the optional Rack Mounting Kit,
which you can purchase through certified Sophos partner near you.
General Precautions
Review the electrical and general safety precautions that came with the
components you are adding to your appliance.
Rack Precautions
ÌEnsure that the leveling jacks on the bottom of the rack are fully extended
to the floor with the full weight of the rack resting on them.
ÌIn single rack installation, stabilizers should be attached to the rack.
ÌIn multiple rack installations, the racks should be coupled together.
ÌAlways make sure the rack is stable before extending a component from
the rack.
ÌYou should extend only one component at a time–extending two or more
simultaneously may cause the rack to become unstable.
General Server Precautions
ÌReview the electrical and general safety precautions that came with the
components you are adding to your appliance.
ÌInstall the heaviest server components on the bottom of the rack first, and
then work up.
ÌAllow the hot plug hard drives and power supply modules to cool before
touching them.
ÌAlways keep the rack‘s front door, all panels and server components
closed when not servicing to maintain proper cooling.

UTM 110/120 Operating Instructions
United Kingdom Sales:
Tel: [phone]
Email: [email protected]
North American Sales:
Toll Free: 1-866-866-2802
Email: [email protected]
Australia & New Zealand Sales
Tel: [phone]
Email: [email protected]
Boston, USA | Oxford, UK
© Copyright 2012. Sophos Ltd. All rights reserved.
All trademarks are the property of their respective owners.
Sophos Operating Instructions 02.12v1.dNA
Rack Mounting Considerations
ÌAmbient operating temperature: If installed in a closed or multi-unit rack
assembly, the ambient operating temperature of the rack environment
may be greater than the ambient temperature of the room. Therefore,
you should install the equipment in an environment compatible with the
manufacturer’s maximum rated ambient temperature.
ÌReduced airflow: Equipment should be mounted into a rack with sufficient
airflow to allow cooling.
ÌMechanical loading: Equipment should be mounted into a rack so that a
hazardous condition does not arise due to uneven mechanical loading.
ÌCircuit overloading: Consideration should be given to the connection
of the equipment to the power supply circuitry and the effect that any
possible overloading of circuits might have on overcurrent protection and
power supply wiring. Appropriate consideration of equipment nameplate
ratings should be used when addressing this concern.
ÌReliable grounding: Reliable grounding must be maintained at all times.
To ensure this, the rack itself should be grounded. Particular attention
should be given to power supply connections other than the direct
connections to the branch circuit (i.e., the use of power strips, etc.).
Connection and Configuration
How to connect the appliance is described in the Hardware Quick Start
Guide. For configuration you can follow the initial setup wizard described in
the WebAdmin Quick Start Guide or cancel it and perform a manual setup
(see the Sophos UTM Administration Guide).
Serial Console
You can connect a serial console to the COM port of the Sophos UTM
hardware appliances. You can use, for instance, the Hyperterminal terminal
program included with most versions of Microsoft Windows to log on to the
appliance console. You will need a RJ45 to DB9 adapter cable to connect the
console to your hardware appliance.
The required connection settings are:
Bits per second: 38,400, Data bits: 8, Parity: N (none), Stop bits: 1. Access via
the serial console is activated by default on ttyS1. The connections of the
appliances and the respective functionality are listed in chapter "Operating
Elements and Connections."