Sound Devices CL-9 User manual

CL-9
Linear Fader Controller for the 788T Digital Recorder
Sound Devices, LLC
E7556 State Rd. 23 and 33 • Reedsburg, WI • USA
[phone] • fax: [phone]
Toll-Free: [phone]
www.sounddevices.com
[e-mail]

The CL-9 Linear Fader Controller is an optional accessory for the 788T Digital Recorder. It signifi-
cantly expands the mixing capability and accessibility of the recorder. The following is a list of key
features of the CL-9.
• 100 mm ultra-low latency linear faders on each input for precise control of post-fade levels
• Master rotary faders for Left, Right, Aux1, and Aux2 Tracks
• Provides access to the 788T parametric EQ
• Provides access to continuous pan to the Left and Right Tracks
• Provides access to the slating system
• Provides access to two separate private bidirectional talk back systems
• Allows user to quickly change parameters of various functions
• Allows user to quickly change input-to-track routing and track enabled status
• Allows user to quickly solo any input, track, or output in the headphone monitor
• Ability to quickly mute outputs
• No extended power sources required. Control and powering via a single USB cable.
See the reverse-side of this document for connection instructions. For details on operation refer to the
788T User Guide and Technical Information located at
http://www.sounddevices.com/download/guides/788t_en.pdf.
Specifications
Powering Powered by the 788T over USB bus power.
Dimensions 2.75” x 13.75” x 8.75” (H x W x D)
7 cm x 34.5 cm x 22.5 cm (H x W x D)
Weight 4 lbs 11 oz
2.1 kg
Included Cables USB-A Male to USB-B Male cable, length 6’
3.5 mm to 1/4”, Tip-Ring-Sleeve, length 5’
Complete details on CL-9 functionality are available in 788T User Guide and Technical Information.CL-9
Connection
The CL-9 is connected to the 788T and powered from it via USB; no other powering source is re-
quired. The 788T Headphone Output is connected to the CL-9’s 788T Headphone Input on the rear
panel allowing the CL-9 to be the master headphone control of the entire 788T/CL-9 system. Use the
following step-by-step instructions to ensure proper physical connection of the CL-9 to the 788T.
1. Connect the USB A Male connector to the USB A Female KEYBD Input on the 788T Rear Panel.
2. Connect the USB B Male connector to the USB B Female Input labeled “788T” on the CL-9 Rear Panel.
Once connected, the CL-9 immediately updates according to the 788T’s latest version of firmware.
When the CL-9 is first connected to a 788T not originally shipped from the factory with revision
2.00 firmware or greater, a notice appears on the LCD indicating that the firmware update process is
required for CL-9 operation. This update is required, even if revision 2.00 or greater is running on the
788T. Please view the IMPORTANT! Read Me First document that is included in the CL-9 shipping
package.

3. Connect the 1/4-inch Male TRS connector to the 1/4-inch Female Headphone Output on the 788T Right
Panel.
4. Connect the other 1/4-inch Male TRS connector to the 1/4-inch Female Input labeled “Headphone
From 788T” on the CL-9 Rear Panel.
5. Connect Headphones to either the 3.5 mm or 1/4-inch Headphone Output on the CL-9 Front Panel.
6. Power the 788T on.
The following warning screen appears when the USB connection between a CL-9 and 788T is dis-
rupted.
If disconnected, the 788T retains all CL-9 settings unless the user confirms disconnection. All CL-9
only settings will then be disabled, including Fader levels, COMs, Slate, EQ, Pan, and Output Mutes.
If the CL-9 is reconnected without pressing confirmation, the 788T returns to the screen viewed prior
to disconnection. All settings remain the same, provided that the fader levels have not been adjusted.
Warranty, Service, and Technical Support
Sound Devices, LLC warrants the CL-9 against defects in materials and workmanship for a period of
TWO (2) years from date of original retail purchase.
This is a non-transferable warranty that extends only to the original purchaser. Sound Devices, LLC
will repair or replace the product at its discretion at no charge. Warranty claims due to severe service
conditions will be addressed on an individual basis.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE. SOUND DEVICES,
LLC DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRAN-
TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
SOUND DEVICES, LLC IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUEN-
TIAL DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LE-
GAL THEORY. Because some jurisdictions do not permit the exclusion or limitations set forth above,
they may not apply in all cases.
For all service, including warranty repair, please contact Sound Devices for an RMA (return mer-
chandise authorization) before sending your unit in for repair. Product returned without an RMA
number may experience delays in repair. When sending a unit for repair, please do not include ac-
cessories, including SSD drives, CF cards, baeries, power supplies, carry cases, cables, or adapters
unless instructed by Sound Devices.
Sound Devices, LLC
Service Repair RMA #XXXXX
E7556 State Road 23 and 33
Reedsburg, WI 53959 USA
telephone: [phone] Technical Support / Bug Reports
For technical support and bug reporting on all Sound Devices products contact:
Sound Devices, LLC
E-mail: [email protected]
web: http://www.sounddevices.com/support/
Telephone: [phone] / Toll-Free in the U.S.A.: [phone]
Fax: [phone]

CL-9 CE Declaration of Conformity
According to ISO/IEC Guide 22
Sound Devices, LLC
300 Wengel Drive
Reedsburg, WI 53959 USA
declares that the product, CL-9 Linear Fader Controller is in conformity with and passes:
89/336/EEC EMC Directive
EN 55103-1, 1997 EMC-Product Family Standard for Audio, Video, Audio-Visual and Entertainment
Lighting Control Apparatus for Professional use. Part 1: Emissions
EN 55103-1, 1997 EMC-Product Family Standard for Audio, Video, Audio-Visual and Entertainment
Lighting Control Apparatus for Professional use. Part 2: Immunity
CISPR 22, 2006 (EN 55022, 2006) Radiated Emissions, Class B
CISPR 22, 2006 (EN 55022, 2006) Conducted Emissions Class B
IEC 61000-3-2, 2005
EN 61000-3-2, 2001
Harmonic Current Emissions (through Amendment 14 of IEC 61000-4-7)
IEC 61000-3-3, 2005
EN 61000-3-3, 2002
Voltage Fluctuation and Flicker
EN 55103-1 Phenomena 2,3, 1997
EN 55103-1
Magnetic Emissions at 1 Meter 50Hz – 50kHz
IEC 61000-4-2, 2001
EN 61000-4-2, 2001
ESD, ±4kV Contact, ±8kV Air Discharge
IEC 61000-4-3, 2006
EN 61000-4-3, 2005
Radiated RF Immunity, 3V/m, 80% AM @
1kHz, 1% step of the previous frequency
80-1000 MHz
IEC 61000-4-4, 2004
EN 61000-4-4, 2005
EFT Burst:
±0.5 kV - ±2kV
IEC 61000-4-4, 2004
EN 61000-4-4, 2005
EFT Burst ±0.5kV to ±1kV
IEC 61000-4-5, 2005
EN 61000-4-5, 2001
Surge ±1kV Differential Mode (line to line)
±2kV Common Mode (line to ground)
IEC 61000-4-5, 2005
EN 61000-4-5, 2001
Surge ± 1kV Common Mode
IEC 61000-4-6, 2006
EN 61000-4-6, 2005
Conducted RF Immunity: 3 V
80% AM modulation @ 1kHz
IEC 61000-4-6, 2006
EN 61000-4-6, 2005
Conducted RF Immunity: 3 V,
80% AM modulation @ 1kHz
EN 55103-2 Phenomena 3, 1997
EN 55103-2, 1997
Magnetic Immunity 50Hz – 10 KHz
IEC 61000-4-11, 2004
EN 61000-4-11, 2004
Voltage Dips and Short Interruptions at test
Voltage level: 70%, 40% and 5% nominal
for 10ms, 100ms, 1 sec and 5 sec (50Hz)
Tested by L. S. Compliance, Inc. Cedarburg, Wisconsin
January 28, 2010
Matthew Anderson
Director of Engineering
Sound Devices, LLC

Limitation of Liability
LIMITATION ON SOUND DEVICES’ LIABILITY. SOUND DEVICES, LLC SHALL NOT BE LIABLE TO THE PURCHASER OF THIS
PRODUCT OR THIRD PARTIES FOR DAMAGES, LOSSES, COSTS, OR EXPENSES INCURRED BY PURCHASER OR THIRD PAR-
TIES AS A RESULT OF: ACCIDENT, MISUSE, OR ABUSE OF THIS PRODUCT OR UNAUTHORIZED MODIFICATIONS, REPAIRS,
OR ALTERATIONS TO THIS PRODUCT, OR FAILURE TO STRICTLY COMPLY WITH SOUND DEVICES, LLC’S OPERATING AND
INSTALLATION INSTRUCTIONS.TO THE FULLEST EXTENT PERMITTED BY LAW, SOUND DEVICES SHALL HAVE NO LIABILITY
TO THE END USER OR ANY OTHER PERSON FOR COSTS, EXPENSES, DIRECT DAMAGES, INCIDENTAL DAMAGES, PUNITIVE
DAMAGES, SPECIAL DAMAGES, CONSEQUENTIAL DAMAGES OR OTHER DAMAGES OF ANY KIND OR NATURE WHATSOEVER
ARISING OUT OF OR RELATING TO THE PRODUCTS, THESE TERMS AND CONDITIONS OR THE PARTIES’ RELATIONSHIP,
INCLUDING, WITHOUT LIMITATION, DAMAGES RESULTING FROM OR RELATED TO THE DELETION OR OTHER LOSS OF AUDIO
OR VIDEO RECORDINGS OR DATA, REDUCED OR DIMINISHED AUDIO OR VIDEO QUALITY OR OTHER SIMILAR AUDIO OR
VIDEO DEFECTS ARISING FROM, RELATED TO OR OTHERWISE ATTRIBUTABLE TO THE PRODUCTS OR THE END USER’S USE
OR OPERATION THEREOF, REGARDLESS OF WHETHER SUCH DAMAGES ARE CLAIMED UNDER CONTRACT, TORT OR ANY
OTHER THEORY. “CONSEQUENTIAL DAMAGES” FOR WHICH SOUND DEVICES SHALL NOT BE LIABLE SHALL INCLUDE, WITH-
OUT LIMITATION, LOST PROFITS, PENALTIES, DELAY DAMAGES, LIQUIDATED DAMAGES AND OTHER DAMAGES AND LIABILI-
TIES WHICH END USER SHALL BE OBLIGATED TO PAY OR WHICH END USER OR ANY OTHER PARTY MAY INCUR RELATED TO
OR ARISING OUT OF ITS CONTRACTS WITH ITS CUSTOMERS OR OTHER THIRD PARTIES. NOTWITHSTANDING AND WITHOUT
LIMITING THE FOREGOING, IN NO EVENT SHALL SOUND DEVICES BE LIABLE FOR ANY AMOUNT OF DAMAGES IN EXCESS
OF AMOUNTS PAID BY THE END USER FOR THE PRODUCTS AS TO WHICH ANY LIABILITY HAS BEEN DETERMINED TO EXIST.
SOUND DEVICES AND END USER EXPRESSLY AGREE THAT THE PRICE FOR THE PRODUCTS WAS DETERMINED IN CONSID-
ERATION OF THE LIMITATION ON LIABILITY AND DAMAGES SET FORTH HEREIN AND SUCH LIMITATION HAS BEEN SPECIFI-
CALLY BARGAINED FOR AND CONSTITUTES AN AGREED ALLOCATION OF RISK WHICH SHALL SURVIVE THE DETERMINATION
OF ANY COURT OF COMPETENT JURISDICTION THAT ANY REMEDY HEREIN FAILS OF ITS ESSENTIAL PURPOSE.