Sound Pro NDS-8006D User manual

8” Portable Dual Speakers
withBluetooth® &TWS
NDS-8006D
Instruction Manual
Please read carefully before use and keep for future reference

2
WARNING
1. Read these instructions.
2. Guard this manual.
3. Obey all alerts.
4. Follow all instructions.
5. WARNING: To prevent re or shock hazard, do not expose this equipment to rain or moisture.
Do not store and operate this product near liquid.
6. Clean only with dry cloth.
7. Not store and not operate this product near any heat sources such as radiators and heat regis-
ters, stove or other appliances (including ampliers) that produce heat. Keep this product in a well
ventilated place.
8. Not ignore the safety purpose of the polarized or grounding plug. A polarized plug has two
blades being wider than the other. A grounding plug has two blades plus a round pin to ground.
The wide blade or the third prong is intended to provide security. If the provided plug does not t
into your outlet, consult an electrician to replace the outlet.
9. Protect all wires connected to this unit from being walked on or pinched, particularly at plugs
and the point where the cord exits the unit. When unplugging from the electrical outlet, grasp the
plug and do not pull the cord.
10. Disconnect the unit during lightning storms or when long period is to remain unused.
11. Keep this unit o󰀨 when connecting all the devices connected to it.
12. After nishing the installation and connections, connect all your equipment with low volume
level. Once all devices are connected, slowly increase the volume or level controls to achieve the
proper position.
13. Before placement, installation, assembly or suspending any product, inspect all equipment,
suspension, cabinets, transducers, brackets and associated equipment. Any missing component,
corroded, deformed, or with non-nominal load can reduce the intensity, placement and arrange-
ment of the installation signicantly. Any of these conditions can reduce the security of the facility
and must be corrected immediately. Use only suitable equipment for the loading conditions of
the installation and that any possibility of reducing term, unexpected overload, never exceed the
capacity of the material or equipment.
14. Consult a licensed professional to install the equipment and make sure that all local, regional
and national regulations related to security are understood and adhered to.
15. All services should be performed by qualied professionals. Servicing is required when the
apparatus has been damaged in any way, as if having the power cord or its damaged connector,
or if the machine breaks contact with liquid or if any object is inserted in the unit or if the unit is
exposed to rain or moisture, or if the unit does not operate normally, or has been dropped.
CHARGE THE BATTERY FULLY BEFORE FIRST USE TO OPTIMIZE ITS LIFETIME PERFOR-
MANCE.
IMPORTANT SAFETY INSTRUCTIONS

3
BACK PANEL
1. Volume Knob: Adjust from Min. to Max.
(Power ON/OFF).
2. Echo Knob: Adjust from Min. to Max.
3. Microphone Volume Knob: Adjust from Min.
to Max.
4. Mode Button: Toggle between AUX / USB /
TF / FM / BT (Press and hold to turn light on
5. Previous Track Button: Select the previous
track.
6. Play / Pause Button(Press and hold for TWS
connection)
7. Next Track Button: Select the next track.
8. AUX Input
9. USB Port
10. TF Card Slot
11. Microphone Input
12. 5V DC Connection
1
2
9
10
4
5
6
7
8
3
12
11

4
REMOTE CONTROL
1. STANDBY: Put the unit in standby mode
2. Input Mode Button: Toggle between USB,
TF, FM, AUX, BT
3. Mute: Mute audio playback
4. PLAY/PAUSE
5. Previous Track: Select previous track/station
6. Next Track: Select next track/station
7. EQ: Select EQ mode
8. VOL-: Reduce the master volume
9. VOL+: Increase the master volume
10. REP: Repeat the current track
11. Press to scan channels in FM Mode

5
PAIRING A BLUETOOTH® DEVICE
Use Bluetooth® mode to stream music from a Bluetooth® enabled player (e.g.,
smartphone or tablet device). A device must be paired with the unit before using them
To pair a Bluetooth® enabled device with the Speaker, follow these steps:
1. Make sure Bluetooth® is enabled on your device and that it is next to the unit before
attempting to pair it.
2. Turn on the Speaker and set it to Bluetooth® mode (press the MODE Button). The
speaker will automatically enter pairing mode and make a beeping sound.
3. Use your device to search for nearby Bluetooth devices. The Speaker will be listed as
“SOUND PRO NDS-8006D”. (This function is usually in the Bluetooth® settings menu;
refer to your device’s instruction manual to learn more.)
4. Select “SOUND PRO NDS-8006D” from the list of found/available devices. The
You can now start playback on your connected device to begin streaming music to the
speaker.
TWS FUNCTION
The Bluetooth® speaker allows you to enjoy your favorite audio played over multiple
speakers at the same time thanks to the included TWS function. To use the TWS func-
tion, follow these steps:
1. Turn on the speakers you intend to use.
2. Press the MODE button on the speakers to switch to Bluetooth® mode. The word
3. Please press the PLAY/PAUSE (TWS) button on one of the speakers and hold it
for 3 seconds. The two speakers will connect.
4. Open the Bluetooth® settings menu on your external device and initiate a search for
nearby devices. Select “SOUND PRO NDS-8006D” and connect.
5. Begin playback and the audio will play through the two connected speakers.
NOTE: TWS functionality is for two speakers at a time only. It can not support more than
two speakers at the same time.

6
DISPLAY SYSTEM SETTINGS
The Speaker comes with an LED display screen that readily provides information information
on current functions in use. Below is a list of information provided on the display screen:
1. Input Mode: The LED display screen will display information of which input mode is currently
in use (USB / TF Card / BT / AUX / FM).
2.Track Number: The track number currently playing from the USB / TF card will display.
-
cally begin scanning for all available local stations.
BATTERY INFORMATION
The Speaker is a lithium battery powered PA loudspeaker. Be sure that you have completely
Once the power adaptor is connected to a power source, it will automatically begin charging
(3-5 hours to fully charge the lithium battery). Even if the battery power is low, it will power on
when connected to a power source. The battery indicator icon (situated on the right hand
side of the LED display) always red when charging to full situation.
With standard usage, a fully charged battery can play for about 2 hour. The battery can be re-
charged about 300 times in its lifetime. When not in use, the Speaker should always be turned
time, the battery will gradually lose its power. It is recommended to fully charge the battery at
least every 60 days.
NOTE:

7
SPECIFICATIONS
Woofer: x 1 + Fake Tweeter x 1 (Each Speaker)
Driver Size: 8”
RMS Power: 7-8 W
Wireless Source: Bluetooth®
Supports: USB / TF / FM / BT / TWS
Display Type: LED (Red)
Light: RGB
Removable Memory Support: USB Flash Drive (Not Included) / TF Card (Not Included)
Audio Format Support: MP3
Tuners: FM
Input Sources: 3.5mm AUX, 6.3mm MIC
Control Knobs: 3 (Master Volume, Mic Volume, Echo Volume)
Battery: 3.7V 1800mAh, Rechargeable
Power Source: 5V DC
Accessories Included: Remote Control, Wired Mic, Manual, a UL Adapter and 2 USB Charge Cables
FCC NOTICE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equip-
ment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful intereference to radio or television reception, which can be
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•
is connected.
•Consult the dealer or an experienced radio/TV technician for help.
CAUTION ON MODIFICATIONS
the authority granted by the FCC to operate the equipment.

8
SUPPORT
If you have problems with your device, please consult the instructions in this manual. Please
also visit us on the web at www.naxa.com to get up-to-the-minute news, alerts, and documen-
tation for your device. For additional assistance, please contact Naxa Technical Support.
Naxa Technical Support
2320 East 49th St.
Vernon, CA 90058
[phone]
http://www.naxa.com/supportcenter/