Soundstream SPL 15 Programming manual

UNDSTREAM’
T E C H N 0 L 0 G i E S
SOUNDSTREAM TECHNOLOGIES
120 Blue Ravine Road
l Folsom l California 95630 USA
tel 916.351 .I 288
fax [phone]
(REV A, 7/22/97)
Subwoofers
I
t
.’
1
OWNER’S MANUAL AND
i .
I.
INSTALLATION GUIDE
)
-
b
\
UNDSTREAM@
T
E
C
H
Iv
0 L
,O G
I
E
S

2
SPL15 and SPL160 SUBWOOFER
CONGRATULATIONS! You have chosen a superior product for
reproducing high levels of "Sound Pressure Level" in the car. This precision
component, when properly installed, is capable of amazing output
performance. The SPL15 and SPL160 woofers are well-suited for sealed,
vented, and sealed bandpass enclosures. They also work well in infinite baffle
installations at one-half the power rating.
Should your woofer ever require service or replacement, recording the
information below for your own records will help protect your investment.
Model Number:___________________________________________________________
Serial Number: ___________________________________________________________
Dealer’s Name: __________________________________________________________
Date of Purchase: ________________________________________________________
Installation Shop: _________________________________________________________
Installation Date: _________________________________________________________
DESIGN FEATURES
•Long Excursion Design -- The SPL woofers use high performance components and the
New Ultra-Excursion Surround to achieve extra long excursion for high output and deep
bass.
•Heavy Cast Aluminum Basket on the SPL160 and Heavy Gauge Steel Basket on the
SPL15 provide extra rigidity and damping.
•Textured Blue Powder Coating ensures durability and lasting superb good looks.
•Ultra-High power handling Voice Coil with Glass Polymide Former increases power
handling and performance. Aerospace grade adhesives and materials insure longevity and
high performance.
•Dual Voice Coil Inputs for increased flexibility in optimizing installations.
•Computer Numerically Controlled (CNC) machined magnet plates and pole piece
precisely focus the magnet energy for optimum performance.
•High Emissivity Coatings on pole and top plates improve power handling.
•Double Magnet Structures for powerful, well-controlled output.
•Vented Pole Piece for greater voice coil cooling.
•Custom-designed High Strength Spider controls the long travel cone assembly.
•Gold Plated 8 Gauge Terminals ensure consistently outstanding connectivity for cable
11
and home theater applications.
SUGGESTED ENCLOSURES (Continued)
Sealed Bandpass
•Enclosure #56
•Rear = 4.7 ft3sealed
Front = 3.5 ft3@ 50 Hz (Four 4" x 7.5" ports) -Very high
output for Rock or Rap music.
•Enclosure #57
•Rear = 2.8 ft3sealed
Front = 2.3 ft3@ 61 Hz (Three 4" x 5.25" ports)-Very high output with good
low frequency extension. Good for Rock or Rap music.
•Enclosure #58
•Rear = 1.5 ft3 sealed
•Front = 2.3 ft3 @ 75Hz (Four 4" x 3.5" ports) -Super high output. Great for
Rap music.

10
SPECIAL DESIGN FEATURES!
•Custom-designed Cast Frame Basket for deep excursion and precise
alignment of the voice coil.
•Custom chrome top and back plates for show-quality installations in any
vehicle!
•Nearly 2 1/2" peak-to-peak maximum excursion for producing awesome
sound levels with just a single woofer!
Infinite Baffle
•Excellent performance for all types of music at moderate levels
Sealed
•1.5 ft3-Good linear response, excellent small enclosure.
Excellent for high SPL, multiple driver applications.
•2.0 ft3 -Good response, excellent all around enclosure.
Vented
•3.0 ft3@ 27 Hz (Two 4" x 22" ports) -High output with good
low frequency extension. Good small enclosure.
•4.0 ft3@ 32 Hz (Three 4" x 16" ports) -High output with
excellent low frequency extension. Great for Rock music
3
Frequency Response (Hz) 25-500 25-500
Sensitivity (2.83v/1m) 95 dB 96 dB
Impedance (nominal Z, ohms) 2 2
Rated Program Power, Watts 400 800
Fs (Hz) 25 28
Qts .33 .33
Qms 6.80 7.82
Qes .35 .35
Vas (ft3)7.98 7.24
Vas (liters) 226 205
Vas (m3).226 .205
Cms (um/N) 201 183
DCR (ohms) 1.68 2.01
Levc (mH) @ 1 KHz 1.02 .67
BL (Tesla m) 12.4 13.3
Sd (in2)131.0 131.0
Sd (m2).0845 .0845
Sd (cm2)845 845
X max; one way (linear mm) 7.0 10.0
X max; one way (peak mm) 22 22
Vd (linear cm3)592 845
Vd (peak cm3)1859 1859
Vd (linear m3)0.000592 0.000845
Vd (peak m3)0.001859 0.001859
Mms (grams) 206 173
Magnet Assembly (oz) 238 345
Magnet Weight (oz) 104 157
Vf (volume of frame, in3)320 385
Coil length (mm) 27.9 28.6
Preliminary
SPECIFICATIONS & THIELE/SMALL PARAMETERS

4
SELECTING AN ENCLOSURE
There are several different enclosure designs for different applications.
The SPL subwoofers work very well in all the following enclosure
designs. It is up to you to select the specific enclosure that will work
the best for your particular application.
Infinite Baffle
Infinite baffle is the simplest type of subwoofer installation. In this type
of installation, the woofer(s) is mounted to a baffle which is then
mounted to either the rear deck or back seat of the vehicle. The best
results are achieved when the trunk area is virtually airtight and
isolated from the passenger compartment.
Sealed Enclosure
Sealed enclosures are relatively simple to build and install, as all that is
required is an airtight box. The larger the sealed enclosure, the more
the performance resembles that of an infinite baffle installation.
Vented Enclosure
Vented enclosures use a sealed enclosure with a vent or port in the box
Pros Cons
•Good low frequency exten-
sion down to the tuning fre-
quency
•High power handling down
to the tuning frequency
•Higher output than sealed
enclosures
•Low power handling
below the tuning fre-
quency
•Almost no output
below the tuning fre-
quency
Pros Cons
•Very good low frequency
extension
•Very good transient re-
sponse
•High power handling
•Medium efficiency
Pros Cons
•Excellent low frequency extension
•Excellent transient response
•Uses almost no trunk space
•Lower power handling
•Low to medium efficiency
SEALED
VENTED
9
SUGGESTED ENCLOSURES (Continued)
Sealed Bandpass
•Enclosure #54
•Rear = 2.8 ft3sealed
•Front = 2.2 ft3@ 55 Hz (Four 4" x 11.5" ports) -High
output with good low frequency extension. Good for
Rock or Rap.
•Enclosure #55
•Rear = 1.3 ft3sealed
•Front = 2.2 ft3 @ 77Hz (Four 4" x 3.25" ports) -Very high output. Great
for Rap music.
Sealed Bandpass (SBP)

8
SUGGESTED ENCLOSURES
Infinite Baffle
•Excellent performance for all types of music at moderate levels
Sealed
•1.5 ft3-Good linear response, excellent small enclosure.
Excellent for high SPL, multiple driver applications.
•2.0 ft3 -Good linear response, excellent all around
enclosure.
Vented
•3.25 ft3@ 27 Hz (Two 4" x 19.75" ports) -High output with
good low frequency extension. Good small enclosure.
•6.7 ft3@ 21 Hz (Two 4" x 15" ports) -High output with
excellent low frequency extension. Great for Rock music
or home theater applications.
Sealed (S)
Vented (V)
5
which is tuned to resonate at a specific frequency.
Sealed Bandpass Enclosure
Sealed bandpass enclosures enclose both sides of the
woofer(s). An airtight enclosure is built around the front and back of
the woofer and one
chamber is ported to
a specific frequency.
CALCULATING (NET) INTERNAL ENCLOSURE VOLUMES
When constructing any type of enclosure, you must be aware that the
outside dimensions DO NOT represent the true (Net) volume inside.
Such things as woofers, ports, thickness of enclosure material, dividing
walls, and any internal bracing will reduce the total amount of the
actual air space available. The following worksheet has been designed
to provide you with the necessary steps to accurately calculate the
absolute (Net) internal volume of any given enclosure.
Calculating Cylindrical Port Volume
1. Measure the outside diameter of the port and divide by 2 for the
radius.
2. Square the radius and multiply by 3.14 (π) to arrive at outside port
area.
3. Multiply the area by the length of
the port inside the enclosure for the
port volume.
outside
diameter
lengthinside
enclosure
Pros Cons
•High power handling
within the operating
frequencies
•Very high output within
the range of the oper-
ating frequencies
•Low power handling
beyond the tuning
frequency
•Poor to moderate
transient response
•Poor low frequency
extension
SEALED BANDPASS

6
Measuremaximumpossible dimensions
Multiplywall thickness by2
Subtract thisfromeachdimensionto
arrive at Gross Internal Dimensions
MultiplyLxWxDto arrive at
Gross InternalVolume
DeductVf(volume ofthespeakerframe)
fromGross InternalVolume
Braces?
NoYes
Calculate bracevolume and deduct
fromGross InternalVolume
DeductVf(volume ofthespeakerframe)
fromGross InternalVolume
Youare atNet InternalVolume
incubicinches(in)
3
Toconvert toLITERS:
Divide inby61.03
Toconvert toCUBICFEET:
Divide inby1728
3
3
ENCLOSURE VOLUME FLOWCHART
7
BUILDING THE ENCLOSURE
•Determine the dimensions of your enclosure.
•Be certain the box you have designed will fit into the location you have
chosen. Sometimes making a cardboard box with the same outside
dimensions is helpful.
•Use 3/4 inch thick Medium Density Fiberboard (MDF) or High Density
Particleboard. It is preferable to cut the wood with a table saw to ensure
straight, even joints. If a table saw is not available, a circular saw is
acceptable.
•Use a “T” square to verify precise right angle gluing.
•Use a high quality wood glue and air nails or wood screws to assemble the
enclosure. Elmer’swoodworker’s glue and Weldwoodwork well. To
guarantee an airtight box, seal each inside joint with silicone sealant.
•For Sealed Enclosures, stuff the chamber with 50-75% filling (approximately
1.5 pounds per cubic foot) of fiberglass insulation or Dacron.
•For Vented Enclosures, staple 1 inch thick fiberglass insulation or Dacron to
all walls of the enclosure except the baffle to which the woofer is mounted.
•Use the supplied gasket to seal the woofer in the enclosure and eight(8)
wood screws or T-nuts and bolts. Progressively tighten each of the bolts or
screws to prevent warping the woofer frame.
•Use slide-on connectors to attach speaker wires. Do not solder wires to the
SUGGESTED ENCLOSURES
The following designs include a variety of enclosure sizes and types.
Each design has two frequency response curves; one showing predicted
“In-Car” response, and the other showing “Half-Space Anechoic” (out-of-car)
frequency response. The performance difference between the two curves is a
result of the natural acoustics of an “average” automotive environment. This
“average” transfer function is only an approximation of what you may expect to
see in your car. Every car is different. Each curve was generated using 2.0
Volts across both voice coils in parallel and measured at 1 meter. Also, each
frequency response curve includes a 12 dB/octave low pass at 100 Hz. The
response curves can help you visualize relative performance differences
between designs. Read through the descriptions given for each enclosure and
select the one that suits your needs.
Remember: all suggested enclosure volumes are Net, and DO NOT include
woofer, port, and bracing displacement!