SoundTools CAT BOX FX Safety guide

Step 1:
Use channels 1
thru 4 to connect
your XLR lines
Step 2:
Insert a shielded CAT5e
cable into either etherCON
receptacle and connect the
other end of the cable to an
additonal CAT box, CAT Tails
or other SoundTools RATCAT
unit.
CAT BOX FX STARTER GUIDE
Congratulations on your purchase of the high quality SoundTools CAT Box.
The CAT Box is designed to help simplify your stage wiring system with its compact,
reliable and disconnectable design. Here are some tips to get you started.

12 3 4
4 Female XLR connectors
You can run different types of
signals simultaneously over the
same shielded CAT5e cable. The
most common types of signals
include analog audio, AES3, DMX
and COM
etherCON IN/OUT and THRU
Using shielded CAT5e cable will minimize noise and
interference and is required when using phantom power.
For some applications, such as AES3, unshielded CAT5e
cable can be utilized.
The CAT Box features two etherCON connectors. (IN/OUT and
Thru) This allows multiple CAT Box units to daisy chain the
same four channels to multiple locations and ultilize the
CAT Box as a splitter.
Chasis Ground Switch
Located on one end, the ground lift switch disconnects the cable shield
from the chasis of the box. This can be useful if the metal housing of the box
comes into contact with something that may cause interference.