Southern Enterprises WS531300TX User manual

For assistance with assembly contact:
Southern Enterprises, Inc.
Customer Service 1-800-633-5096
[e-mail]
www.seidal.com
WS531300TX
Chartres Wall Décor
Assembly Instructions
PO#:13736
Page 1

Chartres Wall Décor
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on
clean, padded surface like carpet or blanket. Check that you have all parts indicated. Call customer
service if hardware is missing. Before beginning assembly, carefully study the diagrams below and
sort your hardware according to the pictures. Using the incorrect hardware will cause damage.
1
Quantity
Of 1
Chartres Wall Décor
A
Quantity
of 1
Plastic Anchor
B
Quantity
of 2
Screw Dia 1/8”x1-1/4”L
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Tool List: 3/16" Drill Bit, Drill, Tape Measure and Pencil.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)
Page 2

Note: Drilled hole or plastic anchor not required when
mounting to stud, use screw only. We do not supply
hardware for mounting on concrete walls.
Figure 1
Find a desired location and mark 2
locations for screws on wall.
One screw (for each unit) must be attached
directly into a wall stud. Wall anchor is not
needed when mounting to wall stud.
Drill one of marked 3/16" hole (for each
unit), this hole will be for the Plastic Anchor
(A).
Insert Plastic Anchor (A) into hole on wall
(use a hammer to help).
Using Phillips screwdriver, insert Screws
(B) into Plastic Anchor (A) and the other
into the wall stud. Turn screws until there is
a gap of approximately 3mm between
head of screw and wall.
Hang the Chartres Wall Décor onto the
Screws (B) and verify the Chartres Wall
Décor is resting securely on the mounting
Screw (B).
Now your Chartres Wall Décor is ready to
use.
Chartres Wall Décor
Assembly Instructions
"The hole measurements on
the wall must match with the
hole measurements on back
of the unit"
Page 3
Figure 2

Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame.Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s). If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at serv[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 4