1. Make sure the power is on. Press the
Bluetooth button (you will hear two beeps, low
and high) and hold it until the red LED flashes
repeatedly 4 times per second.
2. Put the mobile phone into pairing mode (see
the instructions which came with your phone)
3. From your phone, search for the Car Kit in
the "discover" or "search for devices" Bluetooth
menu. The name of this menu varies depen-
ding on your phone.
4. "NeoCar" will then appear in the pairing list
on your phone. Select it and key in the pin
number 1111.
5. Both devices are now connected and ready
to be used.
Connect
Switching on
Switch on the Car Kit using the on-off switch.
Connect
Every time the Car Kit has been switched off,
you will need to turn it on again and connect it
with your phone to be able to make and receive
calls again. The pairing process is not neces-
sary here. To connect, press and hold the
Bluetooth button until you hear two beeps (low
and high) to make the connection between your
phone and Car Kit. The red LED flashes 3 times
every 3 seconds. If you wish to disconnect the
Car Kit, press and hold the Bluetooth button until
you hear two beeps, (high and low). The red LED
switches off. With certain phones, you will need to
press the multifunction dial to complete the con-
nection.
6
En
Connect
