Southwing SF-505 User manual

USER GUIDE
SF505
Bluetooth®Hands-Free
English
Español
Français
Deutsch
Italiano
Nederlands
Portuguese
INDEX
2-11
12-21
22-31
32-41
42-49
50-59
60-68

1. BEFORE USING YOUR HANDS-FREE
Hands-free SF505
Bracket
Vehicle power charger
User's guide
3
2
USER GUIDE
SF505
Bluetooth®Hands-Free
ENGLISH
1. Before using your Hands-Free SF505 .......................................... 3
2. Charging your Hands-Free SF505 ................................................ 4
3. Bluetooth pairing .......................................................................... 5
4. Using your Hands-Free SF505 ..................................................... 6
5. Push4TM Call ................................................................................... 7
6. Troubleshooting ............................................................................ 8
7. Safety and general information .................................................... 8
INDEX
[Fig.1]
Check the package
Package of the product is compo-
sed of product main body, bracket,
vehicle power charger, user guide
(see the above illustration). Please
check before using. Be sure to use
the provided vehicle power char-
ger exclusively for the Hands-free
SF505. In case any problem occurs
by use of other adapters, we assu-
me no responsibility or liability.
Check for phone compatibility
Please check your phone compati-
bility before using the SF505. You
can check whether your phone has
Bluetooth capability by visiting
your cell phone manufacturer's
web site.

tely 2 hours to fully charge the
Hands-free.
NOTICE:
Low Battery Alert
If the Battery is Low, the Blue light of the
LED2 will blink in every second and also
you can hear a short beep sound every
30 seconds.
3.BLUETOOTH PAIRING
Auto-pairing
For added convenience, your Car-
kit has an auto-pairing function so
that when you turn the Car-kit on
for the first time, it is already in
pairing mode (you will also hear a
series of high tones). Then, follow
these steps:
1. Put the mobile phone into pai-
ring mode (see the instructions
which came with your phone).
Ensure that the mobile phone is no
more than 1 metre away from the
hands-free.
2. Use your phone's menu to
search for Bluetooth audio devices
and select "SouthWing SF505"
when it appears on the display.
3. Enter the PIN number: 00000000
If the Hands-free stops responding
to button presses, you must reset
the hands-free. To reset the Hands-
free, turn off both Hands-free and
the mobile phone, and then retry
from the first step.
If the two blue lights of the Hands-
free still blink on shifts, it means
the pairing has failed. You should
turn off both Hands-free and your
mobile phone, and then retry from
the first step.
IIfftthheeppaaiirriinnggiissssuucccceessssffuullllyymmaaddee,,
tthheeHHaannddss--ffrreeeewwiillllbbeeBBlluueettooootthh--
ccoonnnneecctteeddtto
otthheepphhoonneeaanndd
uussuuaallllyytthhiissiissiinnddiiccaatteeddoonntthhee
pphhoonneeddiissppllaayy..PPlleeaasseerreeffeerrttooyyoouurr
pphhoonneemmaannuuaall..WWh
heennddiissccoonnnneecc--
tteedd,,tthheeHHaannddss--ffrreeeeccaannbbeerreeccoonn--
nneecctteeddttootthheepphhoonneebbyyssiimmppllyy
sshhoorrttpprreessssiinnggtthheeMMuul
lttii--ffuunnccttiioonn
bbuuttttoonn..
Note:
In some circumstances the pairing pro-
cess can take up to 2 minutes to comple-
te.
Normal pairing
You will need to follow the steps
below if you want to pair your
Headset with another mobile
phone.
1. Turn on both devices. For the
Hands-free, use the power switch
as shown in fig. 2.
5
Overview
Status Indicators
The SF505 is equipped with two
LEDs to indicate its status.
1. LED1 and LED2 blinking conti-
nuously : Power on mode
2. LED1 and LED2 blinking on shift
: Pairing mode
3. LED1 blinking : Active or Stand-
by mode
4. LED2 blinking : Low battery
5. Both LED1 and LED 2 off :
Power off
2. CHARGING YOUR HANDS-FREE
Use only the vehicle power charger
provided.
The SF505 uses a rechargeable
battery that must be fully charged
before you use it for the first time.
Connect the supplied vehicle
power charger to power socket
and then to your Hands-free. The
status of indicator will be illumina-
ted red while charging and change
to yellow when the Hands-free is
fully charged. It takes approxima-
4
[Fig.2]
1. Power Switch
2. Two LEDs Indicators for power on, pai-
ring, active/stand-by, low battery (2-1: LED1
/ 2-2: LED2)
3. Multi-function button (pairing, active,
stand-by, Push4TM)
4. Volume Control
5. Mute button
6. Charging Socket
7. Speaker
8. Microphone
[Fig.3]
2-2

* The features marked with an asterisk will only work with Bluetooth phones which support the Hands-free profile.
Today, most Bluetooth phones support this profile.
5. PUSH4TM CALL*
Your Headset can be configured
with a specific Push4TM call func-
tion. With the Headset on, press
and hold the Multi-function/Push4TM
button for 1 second to call directly
to the configured number or phone
service.
In some cases, you can use this
function as your favourite number.
To do so, you will first need to
save your favourite number on the
Headset. This can only be done
when you have received a call (A)
from this same number into your
Headset (not made through a hid-
den call). Once this received call
has ended (B), press and hold both
Vol+ and Mute buttons for 3
seconds, until you hear a series of
tones. The number from the last
received call will be stored.
Now you can make a direct call to
this number at any time just by
pressing and holding the Multi-
function/Push4TM button for 1
second.
7
2. Place the Hands-free in pairing
mode by pressing and holding the
multi-function button. Release the
button when the status indicators
begin to flash on shifts.
Then complete normal pairing pro-
cess by following point 1 and 2 of
the auto-pairing section above.
4. USING YOUR HANDS-FREE
Connect the handsfree to the phone
When disconnected, the Hands-
free can be reconnected to the
phone by simply short pressing the
Multi-function button.
Disconnect the handsfree from the
phone
Press the mute button 3 times.
Answer/End/Place a call
To annsswweerraaccaallll, short press the
Multi-function button.
To eennddaaccaallll, long press the Multi-
function button. (More than 1 sec.)
To ppllaacceeaaccaallllusing voice dialing,
short press the Multi-function but-
ton. If you are on a call using your
phone handset, you can transfer
the call to your Hands-free by a
short press of the Multi-function
button.
Automatic call pick up
If you wish to have all of your calls
accepted automatically (without
any button presses), you can ena-
ble the automatic call pick up
mode. To activate this mode,
briefly press the Vol+ and Multi-
function buttons. When you recei-
ve an incoming call, your Hands-
Free will automatically answer the
call after 1 second. To turn off the
automatic call pick up, just follow
the same steps.
Call transfer back to phone
To transfer a call from your hands-
free back to your phone, short
press the Multi-function button.
Call Reject
To reject a call without answering
when the Hands-free is ringing,
long press Multi-function button.
Last Number redial
To redial the last number, briefly
press the Multi-function button
twice.
During a call, press the Volume
Control Buttons to adjust the volume.
During a call, short press the Mute
Button to mute the microphone. To
take the microphone off mute,
press the button again.
6
[Fig.4]

Battery Care
Your Handsfree battery will have a
long life provided you follow these
guide lines:
· Do not use any accessory to char-
ge your Handsfree other than the
ones provided by SouthWing for
this product.
· Do not charge your Handsfree
outdoors.
· Do not charge your Handsfree if
the ambient temperature is above
45 degrees Celsius or below 10
degrees Celsius.
· Do not leave your Handsfree con-
nected to the charger for extended
periods of time, as excessive char-
ging will reduce battery life.
Safe Usage Guidelines
· It is under the driver's responsibi-
lity to make a safe use of the
Handsfree.
· Only use the product according
to the directions within this User
Guide. Usage of this product con-
trary to these directions could
cause injury. In addition, any usage
of this product contrary to this
User Guide will void any warranty.
· Do not place the product in a fire
as it may explode causing injury or
death.
· Do not attempt to service this
product yourself. If the product
requires servicing, this must be
performed by an approved service
person.
· If the product becomes dirty, it
should be cleaned with a soft
cloth. Do not use any cleaning
agents as these may damage the
plastics, electronics or battery.
· As this product contains parts
which may cause injury if consu-
med, keep it out of reach of chil-
dren.
· Use only the power supply or
accessories approved by
SouthWing. Usage of a different
power supply or charger or modifi-
cation of either of these devices
may damage the product or result
in a risk of electrocution.
Warranty
SouthWing provides a guarantee
that this product will be free of
defects in workmanship and mate-
rial for a period of 2 years. Should
the product fail under normal
usage within this period, please
return the product to the store
from which it was purchased. At
the discretion of SouthWing, the
faulty product will then be replaced
or repaired at no cost according to
the conditions outlined below.
Conditions
1.To be granted, this guarantee
requires the presentation of the ori-
ginal dated purchase
invoice/receipt as well as the serial
number. SouthWing reserves the
right to refuse warranty service if
this documentation is not presen-
ted.
2. Any product repaired or repla-
ced will be covered by the same
9
6. TROUBLESHOOTING
If you need more help:
Web: wwwwww..ssoouutthh--wwiinngg..ccoomm
(SF505 and FAQ and Tips)
7.SAFETY AND GENERAL INFORMA-
TION
Contacts
Please contact SouthWing should
you have any questions or sugges-
ted improvements, indicating your
product's serial number.
Email: customer.ser[email protected]
Please note:
For all warranty related issues, please
return the product to the shop from
which you purchased it.
8
Problem Suggestions
The Hands-free will not turn on · The Hands-free battery may be flat. Try
recharging the Hands-free.
Pairing is unsuccessful · Try moving the phone and Hands-free closer
together during pairing.
· Make sure that the mobile phone is in the cor-
rect Bluetooth mode.
· Some electrical devices such as microwave
ovens create a noisy electrical environment
making it difficult for the Hands-free to com-
municate with the phone.
Try moving away from such devices and try
again.
Pairing has succeeded but calls · Make sure that your phone is switched on
are not heard in the Hands-free and ready to connect to the Hands-free.
Check your phone user manual on how to
do this.
The Hands-free stops responding · Ensure that your Hands-free battery is
to button presses charged.
· Try resetting your Hands-free according to the
directions given in “Resetting your Hands-
free”by turning it Off and On again.