Space Television PT-100 User manual

PC to TV Converter Box
Display on TV the materials from your laptop
Model:PT-100
Thanks for your purchasing this product.
Please read the Manual carefully before
using it, and keep this manual for further
reference.
Note: Before Using this product, Please
check
includ
Remo
AAA B
housi
the content of package,
ing: PT-100 Main unit,
te Controller, VGA Cable,
atteries X2, Video Cable.
S-Video cable
Note: For Safety reason, never open the
ng of PT-100. There is no user serviceable part.
Functon:
Show PC Presentation on TV
PT-100 PC to TV converter box is a palm size universal VGA to TV converter box.
Supporting
the VGA resolution up to 1024X768, it converts the VGA signal into Composite
Video, S-Video.
There is also a VGA output port for loop through application. It is good for
presentation, Web-Browsing, PC online Game, PC pictures, Surveillance and
movies down-load from Internet
1

Features:
Plug 'n' Play
No software needed, just plug and play
Full Scan Rate
support VGA Input
Scan rate up to @640X480, 85Hz
Scan rate up to @800X600, 85Hz
Scan rate up to @1024X768, 60Hz
Anti-flickering
PT-100, utilizing state-of-art IC, reduces the flickering of picture.
Support all Video System
NTSC / NTSC-J / PAL system.
USB line powered
Be sure to have an output rating of 5 Vdc.
Full Function Remote Control
With the Full Function Remote Controller, the user can adjust the functions very
easily.
The functions: Zoom In/Zoom Out, Vertical Adjustment, Horizontal Adjustment, Anti
flickering, color bar reset,
power, save, reset...etc
Adjustment Keypads
There are aIso adjustment buttons on the body of PT-100, for your convenience to
adjust the picture output on the screen.
Auto-Save function
When you finish the setting of PT-100, all the data will be auto-saved. No need to
reset again when you use it next time.
2
System Requirements Step 3
Step 4
Step 6-1
TV Set, Projector (which
must have a AV or S-Video
Input.), Desktop Computer
or Notebook computer
Step 1 Step 2 RearPannel

Installation
Note: In order to have the best performance, please install the PT-100 by the
following steps:
Step 1
Connect the attached VGA cable from the Output of your computer to "VGA IN" on
the rear panel of PT-100.
Note: If you want to loop out the VGA signal to another monitor please follow the
Step2.
Step 2
Connect the VGA cable of Monitor to the "VGA OUT" on the Rear Panel of PT-100.
Step 3
Connect one end of the attached Video RCA cable to the "VIDEO OUT" of the
PT-100 and the other end to the VIDEO input of your TV set.
Note: If your TV set has S-Video Input and you want to use it for better quality
image, please find a S-Video Male-Male Cable and Follow Step 4.
Step 4
Connect one end of the S-Video Cable to the "S-VIDEO OUT" on the rear panel of
PT-100, and the other
end to your TV Set or Projector.
Cautions ! The S-Video Connector has special orientation.
Before plugging to any S-Video connector, you need to make sure that
orientation , otherwise you may break the connector .
Step 5
Please Set up your Video Format
by 3 switches(as indicated in picture),
Step 5
according to the following Table:
3
Side View
Step 6

Step 6
Use a USB Cable to connect 5V DC power from PC to the USB A inlet on the side
of PT-100.
Step 6-1
Note: There can be another power supply version, optional for OEM only when
client requires.
Under such version, the user can get a Switching Power Adaptor of 5 Vdc output.
Connect the plug of Switching Power Adaptor to the outlet of AC power source,
and 5V DC out to the
"DC IN" of PT-100.
Step 7
Push the Power keypad on the Main Unit or on the remote controller.
Then you should see the picture on your TV Screen.
Front View
Step7
After completing Step 1 to 7, you will finish all set-up procedures for PT-100.
Functions of buttons on the main unit:
1. POWER: On/off switch for this unit.
2. RESET: Press it to return to factory setting.
3. ZOOM: Press it to enlarge the picture on TV screen.
4. keys: Press the button to move the picture toward the direction of
arrows.
4

Functions of Remote Controller
5
Tech of the 9 present
1/9 portion of screen
(enlarged 9 times of
original), you can push the
desired key to show the
portion on the TV Screen
OVERSCAN
PT-100 is designed
for 1024X768 resolution.
If your computer is using
640X480 or 800X600,
you can press this
key to gain a full screen.
COLORBAR
Pressing this key,
there will be a color bar
signal on your TV screen.
You can adjust the setting
of your TV Set (such as
brightness, color, tint).
You can press it again to
return to original setting
RESET
Resetting PT-100
Width-
Adjust the Picture Width
(decrement)
ZOOM
Zooming Function Key,
Press once for Zooming In,
Press Twice to return to
original Setting
Power
Power on/off of PT-100
Tech of the 9 present
1/9 portion of screen
(enlarged 9 times of
original), you can push
the desired key to show
the portion on the TV
Screen
FREEZE
Press the key for
freezing the screen
Filter
Key for reducing the
flickering
of Picture
RECALL
Recall the latest setting.
Width+
Adjust the Picture Width
(increment)
SAVE
When you push this key,
all the setting will be
memorized.
Arrow Key to adjust the
screen

6
Specifications
Input Signal VGA
Horizontal Frequency 25kHz~58.464kHz
Vertical Frequency 50-85Hz
Resolution Supported 1024x768 (upto)60Hz
800x600 (upto)85Hz
640x480 (upto)85Hz
Output Composite Video (RCA)
S-Video
HDB15 VGA Loop Through(use
switch 4 to activate)
Output Video Selection 3 port DIP switch
Remote Control Full Functioned IR Remote
Control
Power By PC USB port or Via DC
adaptor
Package Content PT-100, VGA Cable, IR
Remote(option), AAAx2.(option),
RCA Video Cable
S-Video Cable