sparklypets VEH41D User manual

THE VEST HARNESS
WWW.SPARKLYPETS.COM
Warranty
We are pleased to offer a 3-year warranty on our SparklyPets Vest Harness, starting
from the date of purchase. However, it's important to note that while our harness is
made with the highest quality materials, it is not chew-proof. To ensure the longevity
of your harness, we kindly advise keeping it away from dogs who may be prone to chewing.
During the initial period when your dog is getting accustomed to the harness, we recommend safely
storing it in the provided storage bag after each use. This helps protect the harness from any potential
damage and keeps it in optimal condition. If you have any questions or concerns regarding the warranty
or proper use of the harness, please don't hesitate to reach out to our customer support team. We are
here to assist you and ensure that you and your furry friend have the best experience with our product.
Dear dog lover,
First and foremost, we want to express our heartfelt gratitude for choosing us as your trusted partner for your furry buddy.
I am Christian, the founder of SparklyPets, and it brings me immense joy to introduce you to our Vest Harness, a dog harness that
represents countless hours of innovation and dedication.
In the following sections, we will guide you step-by-step on how to properly set up the harness for your beloved dog. We have
taken great care to provide clear and detailed instructions to ensure a comfortable and secure fit.
We highly recommend finding a quiet indoor space, free from distractions, where you and your furry companion can focus entirely
on adjusting the harness. To make the process more enjoyable, you may want to have some treats on hand, as there might be a
few slight adjustments and movements involved.
Once again, thank you for choosing SparklyPets, and please know that we consider you a valued friend and customer, and we
want to provide the best for your furry friend.
With warm regards,
Christian
Founder of SparklyPets
Carefully remove the harness from its packaging and ensure that all parts and accessories are included and in good
condition. If not, please contact us to resolve this matter.
Familiarize yourself with the harness's components,
to ensure it is in the correct position when you
hold the harness, on one side, you have the head
loop room the one with the above-padded
handle that will go over the dog's neck.
Additionally, on the dog's chest, there will
be a D-ring attachment point. On the back
side of the harness, you will find the Pocket
for the poop bags,
Depending on your dog's size, now is the time
to prepare the harness by widening or narrowing
the straps. The goal is to ease your future
adjusting on your dog to have a snug yet comfortable fit.
USER MANUAL
MODEL NO. VEH41D
Set components
1. Vest Harness
2. Pocket with zipper for poop bags storage
3. Storage Bag
For any support, inquiries, or improvements, please write to us or call us:
[email protected] | [phone]
© Copyright Sparkly Innovation. SparklyPets and all associated logos are trademarks.
Failure to follow these instructions could result in serious injury
for you and your dog.
Easy step-by-step process to properly use the
SparklyPets Vest Harness
Getting familiar with the SparklyPets Vest Harness
FRONT SIDE
BACK SIDE
Placing the Harness on the Dog
Start by unfastening the large back buckles, then gently slide the harness over your
dog's neck. Guide the female buckle through the elastic loops, following the
illustration above, and then securely buckle the harness.
Important! Ensure that the head loop rests at the base of your dog's neck, on the
lower bony part, as shown in the picture above.

Once the harness is in place on your dog, verify that all adjustments are correct,
providing a comfortable and secure fit with no loose or overly tight areas.
A helpful reference is the padded chest D-ring attachment point, which should align
perfectly with the center of your dog's chest, as demonstrated in the image below
WWW.SPARKLYPETS.COM
Adjusting the Harness Left and Right Straps on the Dog
Start by adjusting the tri-glides on both the left and right sides, making sure they
are aligned and parallel.
Tidy up any excess straps by threading them through the elastic loops to prevent
dangling. Be cautious not to make the harness too
tight during this process.
To verify the correct positioning, you
should be able to slide no more
then two fingers between the
harness and your dog's body.
Adjusting the Belly Straps
Once you've secured and adjusted the side parts, check the horizontal belly strap.
Use the tri-glide on the belly strap to create enough space for two fingers to fit
comfortably between the harness and your dog's belly.
Tidy up any excess strap by threading it through
the elastic loop and the back strap loop.
Final checks
If you've followed these steps, congratulations! Your harness is now correctly fitted, and you're
ready for a walk with your furry friend. After your walk, remember to check the harness for any
loosened parts.
With new harnesses, it may take a few uses to settle into place. Ensure proper alignment and
comfort for your dog by periodically checking and adjusting each strap using the two-finger
method.
Enjoy your walks together!
[email protected] | [phone]